[PATCH 1/2] bbu: Search for cdev names aswell
2017-03-10 9:14 UTC (4+ messages)
` [PATCH 2/2] usb: fastboot: umount device before writing to it
[PATCH 1/3] console_countdown: width to of countdown to 4 digits
2017-03-10 9:14 UTC (14+ messages)
` [PATCH 2/3] console_countdown: add possibility to abort countdown by external commands
` [PATCH 3/3] fastboot: abort autoboot timeout when fastboot gadget is activated
` [PATCH v2 1/3] console_countdown: width to of countdown to 4 digits
` [PATCH v2 2/3] console_countdown: add possibility to abort countdown by external commands
` [PATCH v3 0/3] upstream console_countdown related work
` [PATCH v3 1/3] console_countdown: width to of countdown to 4 digits
` [PATCH v3 2/3] console_countdown: add possibility to abort countdown by external commands
` [PATCH v3 3/3] fastboot: abort autoboot timeout when fastboot gadget is activated
` [PATCH v2 "
e1000 driver hangs during probe
2017-03-10 9:13 UTC (4+ messages)
[PATCH] arm: baltos: enable mPCIe slot and configure external GPIO controller
2017-03-10 8:58 UTC
v2017.03.0
2017-03-10 8:09 UTC
[PATCH 1/2] parameter: fix read only int support
2017-03-10 7:26 UTC (4+ messages)
` [PATCH 2/2] video: some framebuffer such as efi does support enable/disable
[PATCH] video: call fb_[en|dis]able instead of fops directly
2017-03-10 7:08 UTC
[PATCH 1/3] import linux __iowrite32/64_copy support
2017-03-10 7:00 UTC (4+ messages)
` [PATCH 2/3] x86: add __raw_read{b,w,l,q} and __raw_write{b,w,l,q}
` [PATCH 3/3] fbcon: use __iowrite{32/64} to speedup the framebuffer console scrolling
[PATCH] fixup! clk: No-op CLK_OF_DECLARE if not enabled
2017-03-10 6:07 UTC
[PATCH 0/5] EFI Secure boot support
2017-03-09 17:24 UTC (7+ messages)
` [PATCH 1/5] efi: add more security related guid for the efivars
` [PATCH 2/5] efi: fix lds for secure boot support
` [PATCH 3/5] efi: fix secure and setup mode report
` [PATCH 4/5] boot: if we are in secure boot mode
` [PATCH 5/5] efi: enable sercure boot support
[PATCH 0/2] efivarfs: rework the filesystem to make it human readable
2017-03-09 14:38 UTC (4+ messages)
` [PATCH 1/2] ls: allow to list a symlink ending with '/' as a dir
` [PATCH 2/2] efivarfs: rework the filesystem to make it human readable
[PATCH 00/20] AT91, at91sam9x5ek updates (part I/III)
2017-03-09 10:54 UTC (23+ messages)
` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/20] regmap: Implement syscon_node_to_regmap()
` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state()
` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook
` [PATCH 06/20] clk: Port two helper functions from Linux
` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 09/20] of: base: Use scoring in DT device matching
` [PATCH 10/20] serial: atmel: Check result of clk_get()
` [PATCH 11/20] usb: ohci-at91: "
` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data
` [PATCH 13/20] usb: ohci-at91: Check result of clk_enable()
` [PATCH 14/20] usb: ehci-atmel: "
` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data
` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register()
` [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource'
[PATCH 0/2] add support of efi Serial IO and Graphics Output Protocol
2017-03-09 8:49 UTC (8+ messages)
` [PATCH 1/2] video: add EFI Graphics Output Protocol support
` [PATCH 2/2] efi: add serial driver support
` [PATCH 2/2 v2] "
[PATCH 1/2] usb: gadget: print a meaningful error message
2017-03-09 8:37 UTC (2+ messages)
` [PATCH 2/2] usb: gadget: properly release f_multi_opts
[PATCH 1/2] usb: imx: role_registered contains role
2017-03-09 8:33 UTC (2+ messages)
` [PATCH 2/2] usb: imx: Fix setting of dev->priv
[PATCH] drivers: clk: clk-imx6.c: Don't gate LDB and IPUs
2017-03-09 7:18 UTC (2+ messages)
[PATCH] ARM: imx233-olinuxino: add CONFIG_CONSOLE_ACTIVATE_ALL
2017-03-09 7:02 UTC (2+ messages)
[PATCH] scripts: imx/mxs remove mxs-usb-loader
2017-03-09 7:02 UTC (2+ messages)
[PATCH] scripts: imx imx-usb-loader: add support for imx23
2017-03-09 6:41 UTC (3+ messages)
` [PATCH v2] scripts: imx imx-usb-loader: add support for imx23 and imx28
[PATCH 07/12] efi: move x86 efi boot support to x86 arch
2017-03-09 6:37 UTC (3+ messages)
` [PATCH] fixup! "
[PATCH 1/2] x86: efi: fix efiexit support
2017-03-09 6:32 UTC (3+ messages)
` [PATCH 2/2] x86: efi: fix logo support
[PATCH 00/45] AT91, at91sam9x5ek updates
2017-03-07 21:52 UTC (58+ messages)
` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build
` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig
` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support
` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource'
` [PATCH 06/45] clocksource: at91: Add DT compatibility table
` [PATCH 07/45] serial: atmel: Check result of clk_get()
` [PATCH 08/45] serial: atmel: Add DT compatibility table
` [PATCH 09/45] regmap: Implement syscon_node_to_regmap()
` [PATCH 10/45] clk: Port two helper functions from Linux
` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 13/45] clk: at91: Port at91 DT clock code
` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree
` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init()
` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT
` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9
` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT
` [PATCH 20/45] mci: Allow parsing for explicit DT node
` [PATCH 21/45] mci: atmel_mci: Add DT support
` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT
` [PATCH 23/45] of: base: Use scoring in DT device matching
` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state
` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook
` [PATCH 26/45] spi: atmel_spi: Add DT support
` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT
` [PATCH 30/45] w1-gpio: Add DT support
` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT
` [PATCH 32/45] usb: ohci-at91: Check result of clk_get()
` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data
` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable()
` [PATCH 35/45] usb: ohci-at91: Add DT support
` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled
` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable()
` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data
` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register()
` [PATCH 41/45] usb: echi-atmel: Add DT support
` [PATCH 42/45] at91sam9x5ek: Configure USB in DT
` [PATCH 43/45] net: macb: Add DT support
` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT
` [PATCH 45/45] at91sam9x5ek: Configure NAND "
[PATCH 0/9] add generic EFI timer
2017-03-07 7:41 UTC (11+ messages)
` [PATCH 1/9] efi: add prototype and definition for creating and closing event
` [PATCH 2/9] efi: add prototype and definition for setting timer
` [PATCH 3/9] efi: move LoaderTimeInitUSec and LoaderDevicePartUUID to postcore initcall
` [PATCH 4/9] efi: move x86 clocksource init at core initcall level
` [PATCH 5/9] clocksource: allow to have multiple device from clock source
` [PATCH 6/9] clocksource: move dummy clock source to init_clock
` [PATCH 7/9] efi: move x86 clocksource to device/driver
` [PATCH 8/9] efi: clocksoure: add EFI event timer
` [PATCH 9/9] efi: add veriable to report secure boot support and status
[PATCH 1/1] video: sdl fix typo
2017-03-06 8:12 UTC (2+ messages)
[RFC PATCH 0/2] use gnuhash to speed up device/driver match
2017-03-06 8:11 UTC (4+ messages)
` [PATCH 1/2] driver: remove the const of struct platform_device_id *id_table
` [PATCH 2/2] driver: generate hash at runtime to speed up device/driver matching
[PATCH] scripts: imx imx-usb-loader: warn if device was excluded by path option
2017-03-06 7:13 UTC (2+ messages)
[PATCH] clk: imx: clk-imx6ul: Use anatop_base pointer for consistency
2017-03-06 7:12 UTC (2+ messages)
[PATCH v2 4/4] video: add support for Solomon SSD1307 OLED controller family
2017-03-06 7:10 UTC (3+ messages)
` [PATCH] fixup! "
[PATCH 1/3] ARM: align exception vectors to 32 byte
2017-03-03 14:26 UTC (8+ messages)
` [PATCH 2/3] ARM: correctly identify ARMv6 K/Z
[PATCH v2] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock
2017-03-03 14:12 UTC
[PATCH] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tx3 clock
2017-03-03 13:39 UTC (3+ messages)
[PATCH] clk: imx: clk-imx6ul: Fixed conditional for enabling USB phy clocks
2017-03-03 10:54 UTC (2+ messages)
[PATCH v2] tftp: implement forward seeking
2017-03-03 10:52 UTC (2+ messages)
[PATCH v2] scripts: imx imx-usb-loader: add usb path support
2017-03-03 6:25 UTC (2+ messages)
[PATCH] tftp: trivial code simplification
2017-03-03 6:15 UTC (2+ messages)
[PATCH] tftp: implement forward seeking
2017-03-03 6:13 UTC (2+ messages)
[PATCH] lseek: tighten error checking and allow negative offsets for SEEK_END
2017-03-03 6:08 UTC (2+ messages)
[PATCH] scripts: imx imx-usb-loader: add usb path support
2017-03-02 14:31 UTC
i.MX28 evk compile error
2017-03-02 12:57 UTC (2+ messages)
[PATCH 1/9] ARM: rpi: move model initialisation to rpi-common
2017-03-02 8:11 UTC (2+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox