mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 1/2] parameter: fix read only int support
 2017-03-10  9:37 UTC  (5+ messages)
` [PATCH 2/2] video: some framebuffer such as efi does support enable/disable

e1000 driver hangs during probe
 2017-03-10  9:20 UTC  (5+ messages)

[PATCH 1/2] bbu: Search for cdev names aswell
 2017-03-10  9:17 UTC  (5+ messages)
` [PATCH 2/2] usb: fastboot: umount device before writing to it

[PATCH] arm: baltos: define baltos_sram_init() return type as void
 2017-03-10  9:15 UTC 

[PATCH 1/3] console_countdown: width to of countdown to 4 digits
 2017-03-10  9:14 UTC  (14+ messages)
` [PATCH 2/3] console_countdown: add possibility to abort countdown by external commands
` [PATCH 3/3] fastboot: abort autoboot timeout when fastboot gadget is activated
` [PATCH v2 1/3] console_countdown: width to of countdown to 4 digits
  ` [PATCH v2 2/3] console_countdown: add possibility to abort countdown by external commands
    ` [PATCH v3 0/3] upstream console_countdown related work
      ` [PATCH v3 1/3] console_countdown: width to of countdown to 4 digits
      ` [PATCH v3 2/3] console_countdown: add possibility to abort countdown by external commands
      ` [PATCH v3 3/3] fastboot: abort autoboot timeout when fastboot gadget is activated
  ` [PATCH v2 "

[PATCH] arm: baltos: enable mPCIe slot and configure external GPIO controller
 2017-03-10  8:58 UTC 

v2017.03.0
 2017-03-10  8:09 UTC 

[PATCH] video: call fb_[en|dis]able instead of fops directly
 2017-03-10  7:08 UTC 

[PATCH 1/3] import linux __iowrite32/64_copy support
 2017-03-10  7:00 UTC  (4+ messages)
` [PATCH 2/3] x86: add __raw_read{b,w,l,q} and __raw_write{b,w,l,q}
` [PATCH 3/3] fbcon: use __iowrite{32/64} to speedup the framebuffer console scrolling

[PATCH] fixup! clk: No-op CLK_OF_DECLARE if not enabled
 2017-03-10  6:07 UTC 

[PATCH 0/5] EFI Secure boot support
 2017-03-09 17:24 UTC  (7+ messages)
` [PATCH 1/5] efi: add more security related guid for the efivars
  ` [PATCH 2/5] efi: fix lds for secure boot support
  ` [PATCH 3/5] efi: fix secure and setup mode report
  ` [PATCH 4/5] boot: if we are in secure boot mode
  ` [PATCH 5/5] efi: enable sercure boot support

[PATCH 0/2] efivarfs: rework the filesystem to make it human readable
 2017-03-09 14:38 UTC  (4+ messages)
` [PATCH 1/2] ls: allow to list a symlink ending with '/' as a dir
  ` [PATCH 2/2] efivarfs: rework the filesystem to make it human readable

[PATCH 00/20] AT91, at91sam9x5ek updates (part I/III)
 2017-03-09 10:54 UTC  (23+ messages)
` [PATCH 01/20] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/20] regmap: Implement syscon_node_to_regmap()
` [PATCH 03/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 04/20] pinctrl: at91: Fix a bug in at91_pinctrl_set_state()
` [PATCH 05/20] pinctrl: at91: Implement .get_direction hook
` [PATCH 06/20] clk: Port two helper functions from Linux
` [PATCH 07/20] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 08/20] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 09/20] of: base: Use scoring in DT device matching
` [PATCH 10/20] serial: atmel: Check result of clk_get()
` [PATCH 11/20] usb: ohci-at91: "
` [PATCH 12/20] usb: ohci-at91: Convert global variables to private data
` [PATCH 13/20] usb: ohci-at91: Check result of clk_enable()
` [PATCH 14/20] usb: ehci-atmel: "
` [PATCH 15/20] usb: echi-atmel: Convert global variables to private data
` [PATCH 16/20] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 17/20] usb: echi-atmel: Check result of ehci_register()
` [PATCH 18/20] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 19/20] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 20/20] clocksource: at91: Move to 'drivers/clocksource'

[PATCH 0/2] add support of efi Serial IO and Graphics Output Protocol
 2017-03-09  8:49 UTC  (8+ messages)
` [PATCH 1/2] video: add EFI Graphics Output Protocol support
  ` [PATCH 2/2] efi: add serial driver support
    ` [PATCH 2/2 v2] "

[PATCH 1/2] usb: gadget: print a meaningful error message
 2017-03-09  8:37 UTC  (2+ messages)
` [PATCH 2/2] usb: gadget: properly release f_multi_opts

[PATCH 1/2] usb: imx: role_registered contains role
 2017-03-09  8:33 UTC  (2+ messages)
` [PATCH 2/2] usb: imx: Fix setting of dev->priv

[PATCH] drivers: clk: clk-imx6.c: Don't gate LDB and IPUs
 2017-03-09  7:18 UTC  (2+ messages)

[PATCH] ARM: imx233-olinuxino: add CONFIG_CONSOLE_ACTIVATE_ALL
 2017-03-09  7:02 UTC  (2+ messages)

[PATCH] scripts: imx/mxs remove mxs-usb-loader
 2017-03-09  7:02 UTC  (2+ messages)

[PATCH] scripts: imx imx-usb-loader: add support for imx23
 2017-03-09  6:41 UTC  (3+ messages)
` [PATCH v2] scripts: imx imx-usb-loader: add support for imx23 and imx28

[PATCH 07/12] efi: move x86 efi boot support to x86 arch
 2017-03-09  6:37 UTC  (3+ messages)
` [PATCH] fixup! "

[PATCH 1/2] x86: efi: fix efiexit support
 2017-03-09  6:32 UTC  (3+ messages)
` [PATCH 2/2] x86: efi: fix logo support

[PATCH 00/45] AT91, at91sam9x5ek updates
 2017-03-07 21:52 UTC  (58+ messages)
` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h
` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build
` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig
` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support
` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource'
` [PATCH 06/45] clocksource: at91: Add DT compatibility table
` [PATCH 07/45] serial: atmel: Check result of clk_get()
` [PATCH 08/45] serial: atmel: Add DT compatibility table
` [PATCH 09/45] regmap: Implement syscon_node_to_regmap()
` [PATCH 10/45] clk: Port two helper functions from Linux
` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE
` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled
` [PATCH 13/45] clk: at91: Port at91 DT clock code
` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree
` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init()
` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT
` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf()
` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9
` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT
` [PATCH 20/45] mci: Allow parsing for explicit DT node
` [PATCH 21/45] mci: atmel_mci: Add DT support
` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT
` [PATCH 23/45] of: base: Use scoring in DT device matching
` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state
` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook
` [PATCH 26/45] spi: atmel_spi: Add DT support
` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output
` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type
` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT
` [PATCH 30/45] w1-gpio: Add DT support
` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT
` [PATCH 32/45] usb: ohci-at91: Check result of clk_get()
` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data
` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable()
` [PATCH 35/45] usb: ohci-at91: Add DT support
` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled
` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable()
` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data
` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it
` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register()
` [PATCH 41/45] usb: echi-atmel: Add DT support
` [PATCH 42/45] at91sam9x5ek: Configure USB in DT
` [PATCH 43/45] net: macb: Add DT support
` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT
` [PATCH 45/45] at91sam9x5ek: Configure NAND "

[PATCH 0/9] add generic EFI timer
 2017-03-07  7:41 UTC  (11+ messages)
` [PATCH 1/9] efi: add prototype and definition for creating and closing event
  ` [PATCH 2/9] efi: add prototype and definition for setting timer
  ` [PATCH 3/9] efi: move LoaderTimeInitUSec and LoaderDevicePartUUID to postcore initcall
  ` [PATCH 4/9] efi: move x86 clocksource init at core initcall level
  ` [PATCH 5/9] clocksource: allow to have multiple device from clock source
  ` [PATCH 6/9] clocksource: move dummy clock source to init_clock
  ` [PATCH 7/9] efi: move x86 clocksource to device/driver
  ` [PATCH 8/9] efi: clocksoure: add EFI event timer
  ` [PATCH 9/9] efi: add veriable to report secure boot support and status

[PATCH 1/1] video: sdl fix typo
 2017-03-06  8:12 UTC  (2+ messages)

[RFC PATCH 0/2] use gnuhash to speed up device/driver match
 2017-03-06  8:11 UTC  (4+ messages)
` [PATCH 1/2] driver: remove the const of struct platform_device_id *id_table
  ` [PATCH 2/2] driver: generate hash at runtime to speed up device/driver matching

[PATCH] scripts: imx imx-usb-loader: warn if device was excluded by path option
 2017-03-06  7:13 UTC  (2+ messages)

[PATCH] clk: imx: clk-imx6ul: Use anatop_base pointer for consistency
 2017-03-06  7:12 UTC  (2+ messages)

[PATCH v2 4/4] video: add support for Solomon SSD1307 OLED controller family
 2017-03-06  7:10 UTC  (3+ messages)
` [PATCH] fixup! "

[PATCH 1/3] ARM: align exception vectors to 32 byte
 2017-03-03 14:26 UTC  (7+ messages)
` [PATCH 2/3] ARM: correctly identify ARMv6 K/Z

[PATCH v2] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock
 2017-03-03 14:12 UTC 

[PATCH] clk: imx: clk-imx6ul: The i.mx6ul has no aips_tx3 clock
 2017-03-03 13:39 UTC  (3+ messages)

[PATCH] clk: imx: clk-imx6ul: Fixed conditional for enabling USB phy clocks
 2017-03-03 10:54 UTC  (2+ messages)

[PATCH v2] tftp: implement forward seeking
 2017-03-03 10:52 UTC  (2+ messages)

[PATCH v2] scripts: imx imx-usb-loader: add usb path support
 2017-03-03  6:25 UTC  (2+ messages)

[PATCH] tftp: trivial code simplification
 2017-03-03  6:15 UTC  (2+ messages)

[PATCH] tftp: implement forward seeking
 2017-03-03  6:13 UTC  (2+ messages)

[PATCH] lseek: tighten error checking and allow negative offsets for SEEK_END
 2017-03-03  6:08 UTC  (2+ messages)

[PATCH] scripts: imx imx-usb-loader: add usb path support
 2017-03-02 14:31 UTC 

i.MX28 evk compile error
 2017-03-02 12:57 UTC  (2+ messages)

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox