[PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX7
2018-01-10 16:34 UTC
[PATCH] i.MX: ecspi: Enable imx->clk as a part of initialization
2018-01-10 16:31 UTC
[PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR
2018-01-10 16:31 UTC (2+ messages)
` [PATCH 2/2] i.MX7: Add CCM definitions for UART2
[PATCH] device parameters: Allow dots in device names for setenv aswell
2018-01-10 15:06 UTC
[PATCH] Kconfig: drop unused HAS_POWEROFF
2018-01-10 12:21 UTC
[PATCH] reset: reset-socfpga: sync driver with linux
2018-01-10 8:31 UTC
[PATCH 1/2] ARM: socfpga: get rid of clock-frequency assignments
2018-01-10 8:19 UTC (2+ messages)
` [PATCH 2/2] ARM: socfpga: move environment from dtsi to board dts
[PATCH 1/4] net: designware: move probe to generic driver
2018-01-10 8:14 UTC (4+ messages)
` [PATCH 2/4] net: add SoCFPGA-specific designware driver
` [PATCH 3/4] ARM: SoCFPGA: remove emac init code
` [PATCH 4/4] net: designware: add warning for drvdata
[PATCH] i2c: designware: evaluate i2c-sda-hold-time property
2018-01-10 7:52 UTC
command: hashsum: md5sum reports wrong sum for the file named 4k.bin
2018-01-09 14:21 UTC (6+ messages)
` [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed
[PATCH] ARM: i.MX6: add new silicon revision number 1.6
2018-01-09 13:00 UTC
[PATCH] atmel_lcdfb: introduce driver data
2018-01-09 11:04 UTC (2+ messages)
[PATCH v5 0/22] at91: move reset vector to board code
2018-01-09 10:35 UTC (24+ messages)
` [PATCH v5 01/22] at91: mmccpu: remove board support for mmccpu
` [PATCH v5 02/22] arm: at91: refactor lowlevel_init selection
` [PATCH v5 03/22] arm: at91: drop unused at91sam9x5_lowlevel_init.c
` [PATCH v5 04/22] arm: at91: add at91sam926x_board_init.h
` [PATCH v5 05/22] arm: at91: code cleanup in at91sam926x_board_init
` [PATCH v5 06/22] at91sam9263ek: move reset vector to board code
` [PATCH v5 07/22] at91sam9261ek, at91sam9g10ek: "
` [PATCH v5 08/22] pm9261: "
` [PATCH v5 09/22] at91: drop unused at91sam9261_lowlevel_init
` [PATCH v5 10/22] pm9263: move reset vector to board code
` [PATCH v5 11/22] {usb,tny}-a926x: "
` [PATCH v5 12/22] qil-a926x: "
` [PATCH v5 13/22] haba-knx: "
` [PATCH v5 14/22] sama5d{3, 4}{xek, xplained}: "
` [PATCH v5 15/22] at91sam9n12ek: "
` [PATCH v5 16/22] at91sam9260ek, at91sam9g20ek: "
` [PATCH v5 17/22] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: "
` [PATCH v5 18/22] animeo: "
` [PATCH v5 19/22] telit-evk-pro3: "
` [PATCH v5 20/22] dss11: "
` [PATCH v5 21/22] at91rm9200ek: "
` [PATCH v5 22/22] arm: at91: remove leftovers from moving reset code in mach-at91
[PATCH v2 0/4] Enable DT support for AT91SAM9263EK
2018-01-07 22:11 UTC (8+ messages)
` [PATCH 1/4] arm: at91: move irq_fixup to header file
` [PATCH 2/4] arm: at91: simplify soc setup
` [PATCH 3/4] at91sam9263ek: enable multi-image build
` [PATCH 4/4] at91sam9263ek: enable DT support
[PATCH v4 0/25] at91: move reset vector to board code
2018-01-06 20:06 UTC (35+ messages)
` Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...]
` [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c
` [PATCH 03/25] arm: at91: add at91sam926x_board_init.h
` [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init
` [PATCH 05/25] at91sam9263ek: move reset vector to board code
` [PATCH 06/25] at91sam9261ek, at91sam9g10ek: "
` [PATCH 07/25] pm9261: "
` [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init
` [PATCH 09/25] pm9263: move reset vector to board code
` [PATCH 11/25] mmccpu: delete unused lowlevel_init
` [PATCH 12/25] mmccpu: move reset vector to board code
` [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c
` [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code
` [PATCH 18/25] at91sam9n12ek: "
` [PATCH 19/25] at91sam9260ek, at91sam9g20ek: "
` [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: "
` [PATCH 21/25] animeo: "
` [PATCH 22/25] telit-evk-pro3: "
` [PATCH 23/25] dss11: "
` [PATCH 24/25] at91rm9200ek: "
` [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91
` [PATCH 01/25] arm: at91: refactor lowlevel_init selection
` [PATCH 10/25] usb-a926x: move reset vector to board code
` [PATCH 14/25] tny-a926x: "
` [PATCH 15/25] qil-a926x: "
` [PATCH 16/25] haba-knx: "
[PATCH 0/4] build: minimize rebuilds
2018-01-06 7:34 UTC (8+ messages)
` [PATCH 1/4] build: fix that defaultenv is always rebuilt
` [PATCH 2/4] build: fix that passwd.h is always built
` [PATCH 3/4] build: fix that the bbenv file is always rebuilt
` [PATCH 4/4] build: fix that LZO "
[RFC PATCH] pwm: add pwm-atmel from Linux kernel 4.14
2018-01-06 7:29 UTC (3+ messages)
[PATCH] net: make struct bootp __packed to prevent unaligned store on MIPS
2018-01-05 14:53 UTC (3+ messages)
[PATCH] ARM: boards: phytec-som-am335x: Revert unified MLO for 1GB
2018-01-05 14:51 UTC (2+ messages)
[PATCH] linux/kernel.h: move ALIGN_DOWN() to include/linux/kernel.h
2018-01-05 14:50 UTC (3+ messages)
[PATCH] string.h: Implement strndup
2018-01-05 14:48 UTC (2+ messages)
[PATCH 0/5] Enable DT support for AT91SAM9263EK
2017-12-30 22:59 UTC (11+ messages)
` [PATCH 1/5] at91sam9263ek: enable multi-image build
` [PATCH 2/5] at91sam9263ek: add DT file from Linux kernel v4.14-rc4
` [PATCH 3/5] at91sam9263ek: fix SD card in DT
` [PATCH 4/5] arm: at91: enable CPU specific init with OF
` [PATCH 5/5] at91sam9263ek: enable devicetree
` [RFC PATCH 1/2] arm: at91: move irq_fixup to header file
` [RFC PATCH 2/2] arm: at91: simplify soc setup
[PATCH v3 0/24] at91: move reset vector to board code
2017-12-30 10:56 UTC (28+ messages)
` [PATCH 01/24] arm: at91: refactor lowlevel_init selection
` [PATCH 02/24] arm: at91: drop unused at91sam9x5_lowlevel_init.c
` [PATCH 03/24] arm: at91: add at91sam926x_board_init.h
` [PATCH 04/24] at91sam9263ek: move reset vector to board code
` [PATCH 05/24] at91sam9261ek, at91sam9g10ek: "
` [PATCH 06/24] pm9261: "
` [PATCH 07/24] at91: drop unused at91sam9261_lowlevel_init
` [PATCH 08/24] pm9263: move reset vector to board code
` [PATCH 09/24] usb-a926x: "
` [PATCH 10/24] mmccpu: delete unused lowlevel_init
` [PATCH 11/24] mmccpu: move reset vector to board code
` [PATCH 12/24] tny-a926x: delete unused tny_a9263_lowlevel_init.c
` [PATCH 13/24] tny-a926x: move reset vector to board code
` [PATCH 14/24] qil-a926x: "
` [PATCH 15/24] haba-knx: "
` [PATCH 16/24] sama5d{3, 4}{xek, xplained}: "
` [PATCH 17/24] at91sam9n12ek: "
` [PATCH 18/24] at91sam9260ek, at91sam9g20ek: "
` [PATCH 19/24] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: "
` [PATCH 20/24] animeo: "
` [PATCH 21/24] telit-evk-pro3: "
` [PATCH 22/24] dss11: "
` [PATCH 23/24] at91rm9200ek: "
` [PATCH 24/24] arm: at91: remove leftovers from moving reset code in mach-at91
[PATCH] EFI: add poweroff support
2017-12-26 12:17 UTC (2+ messages)
[PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings
2017-12-22 8:09 UTC (3+ messages)
[PATCH] net: phy: scan PHYs referenced by phandle
2017-12-15 7:42 UTC (2+ messages)
[PATCH] Bootm: remove uimage_close done later in bootm_boot
2017-12-15 7:28 UTC (2+ messages)
[PATCH] spi: imx: make xchg_single timeout value compatible for older boards
2017-12-15 7:25 UTC (2+ messages)
[PATCH v2 0/5] add support for DPTechnics DPT-Module v1
2017-12-15 7:22 UTC (7+ messages)
` [PATCH v2 1/5] MIPS: provide HAS_NO_BOARD_HL_CODE
` [PATCH v2 2/5] MIPS: ar9331: add watchdog support
` [PATCH v2 3/5] MIPS: ath79: ar9331: add generic RAM macro
` [PATCH v2 4/5] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro
` [PATCH v2 5/5] MIPS: add support for DPTechnics DPT-Module v1
[PATCH 1/2] common: state: Add property to protect existing data
2017-12-14 15:51 UTC (2+ messages)
` [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property
[PATCH] bootchooser: Fix initcall before environment is ready
2017-12-14 10:16 UTC (2+ messages)
v2017.12.0
2017-12-14 8:38 UTC
[PATCH] net: dhcp: make tftp work again
2017-12-12 7:44 UTC (2+ messages)
[PATCH v1 1/4] MIPS: ar9331: add watchdog support
2017-12-12 7:00 UTC (8+ messages)
` [PATCH v1 2/4] MIPS: ath79: ar9331: add generic RAM macro
` [PATCH v1 3/4] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro
` [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1
barebox on RaspberryPi2 and Pi3
2017-12-12 6:37 UTC (2+ messages)
[PATCH] Documentation: state: mention SD/eMMC devices
2017-12-11 15:00 UTC (2+ messages)
[PATCH v2] Networking updates
2017-12-08 21:56 UTC (3+ messages)
` [PATCH 15/27] net: dhcp: rework
[PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card
2017-12-07 15:19 UTC (4+ messages)
bootchooser and state (again)
2017-12-07 8:06 UTC (2+ messages)
[PATCH] net/e1000: indicate at boot time if flash is in secure mode
2017-12-06 14:56 UTC (2+ messages)
[PATCH 0/4] A bit more consistent interface for "miitool"
2017-12-06 14:55 UTC (3+ messages)
` [PATCH 1/4] commands: miitool: Constify 'phydevname' in mdiobus_show()
[PATCH v2 0/6] MDIO bus multiplexer support
2017-12-06 14:49 UTC (2+ messages)
[PATCH v1] usbgadget command: provide -m option to set usb mode
2017-12-06 8:49 UTC (2+ messages)
[PATCH v1 1/4] MIPS: ath79: ar9331: add generic RAM macro
2017-12-05 11:43 UTC (4+ messages)
` [PATCH v1 2/4] MIPS: add generic QCA AR9331 board
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox