mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH 0/9] Dialog da9063 updates
 2018-04-12  7:22 UTC  (2+ messages)
` [PATCH 8/9] ARM: i.MX: phycore-som: added and enabled DA9062 PMIC

[PATCH] mfd: da9063: Fix compilation
 2018-04-12  7:09 UTC 

[PATCH 0/4] ARM: socfpga: misc fixes
 2018-04-12  5:35 UTC  (5+ messages)
` [PATCH 1/4] net: make SoCFPGA-specific designware driver work again
` [PATCH 2/4] ARM: socfpga: boards: pll_config.h: remove duplicate macros
` [PATCH 3/4] ARM: socfpga: mach/pll_config.h: add guard macro
` [PATCH 4/4] ARM: socfpga_defconfig: enable Altera firmware stuff

[PATCH 0/4] Fix NAND controller clock for i.MX6plus
 2018-04-11 13:26 UTC  (5+ messages)
` [PATCH 1/4] ARM: i.MX6: de-inline i.MX6 type detection
` [PATCH 2/4] ARM: i.MX6: factor out function to read si_rev
` [PATCH 3/4] ARM: i.MX6: Add cpu type for 'plus' variants
` [PATCH 4/4] clk: i.MX6: Fix enfc_sel for i.MX6dqp

[PATCH] ARM: i.MX6: phycore: Enable usbotg
 2018-04-11  9:29 UTC 

[PATCH] clk: i.MX6: Adjust GPMI parent clock
 2018-04-11  9:29 UTC 

[PATCH] ARM: i.MX53 TX53: remove duplicate _imx53
 2018-04-11  9:09 UTC 

[PATCH 00/10] Vybrid MMDC support and misc ESDCTL fixes
 2018-04-11  9:07 UTC  (12+ messages)
` [PATCH 01/10] ARM: i.MX: esdctl: Use IOMEM instead of (void *)
` [PATCH 02/10] ARM: i.MX51: esdctl: Replace magic value with ESDMISC_DDR2_8_BANK
` [PATCH 03/10] ARM: i.MX6: esdctl: Share memory size calculation code
` [PATCH 04/10] ARM: i.MX6: esdctl: Factor out common code in imx6*_barebox_entry()
` [PATCH 05/10] ARM: i.MX6: esdctl: Use symbolic constants for RAM base address
` [PATCH 06/10] ARM: i.MX: esdctl: Make use of min_t()
` [PATCH 07/10] ARM: i.MX: esdctl: Introduce memory_sdram_size()
` [PATCH 08/10] ARM: i.MX: esdctl: Add support for Vybrid's memory controller
` [PATCH 09/10] i.MX: vf610-twr: Make use of vf610_barebox_entry()
` [PATCH 10/10] i.MX: zii-vf610-dev: "

[PATCH] ARM: start: Avoid calling arm_mem_barebox_image() twice
 2018-04-11  8:45 UTC  (2+ messages)

[PATCH 1/2] i.MX: vf610-twr: Print '>' when DEBUG_LL is enabled
 2018-04-11  8:44 UTC  (3+ messages)
` [PATCH 2/2] i.MX: vf610-twr: Convert to use vf610_setup_pad()

[PATCH] pinctrl-vf610: Make use of BIT macro
 2018-04-11  8:43 UTC  (2+ messages)

[PATCH] ARM: Make use of ALIGN_DOWN macro in barebox-arm.h
 2018-04-11  8:43 UTC  (2+ messages)

[PATCH v3 01/10] ARM: import opcode helpers from Linux kernel
 2018-04-11  8:41 UTC  (17+ messages)
` [PATCH v3 02/10] ARM: safely switch from HYP to SVC mode if required
` [PATCH v3 03/10] ARM: allow secure monitor code to be built without PSCI
` [PATCH v3 04/10] ARM: add file for HYP mode related setup
` [PATCH v3 05/10] ARM: don't try to install secure monitor when entered in HYP mode
` [PATCH v3 06/10] ARM: default to starting kernel in HYP mode when entered in HYP
` [PATCH v3 07/10] ARM: install HYP vectors at PBL and Barebox entry
` [PATCH v3 08/10] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
` [PATCH v3 09/10] ARM: rpi: add raspberry pi 3 support
` [PATCH v3 10/10] ARM: rpi: autosize malloc area

[PATCH 0/3] Linux's serdev framwork port
 2018-04-11  8:39 UTC  (10+ messages)
` [PATCH 1/3] console: Introduce console_drain()
` [PATCH 2/3] console: Add simplified 'serdev' framework from Linux kernel
` [PATCH 3/3] serial: Check result of console_unregister()

[PATCH 1/2] i.MX53/TX53: Adjust to latest get_runtime_offset()
 2018-04-11  8:13 UTC  (3+ messages)
` [PATCH 2/2] boards: samx6: "

[PATCH] ARM: Add Advantech imx6 board support
 2018-04-11  8:12 UTC  (7+ messages)
` [PATCH v2] "

[PATCH] doc: bcm283x: update documentation for Raspberry Pi
 2018-04-10  7:08 UTC  (5+ messages)
` [RESEND] "

[PATCH 0/2] mfd: mc13xxx: ADC support
 2018-04-10  7:06 UTC  (4+ messages)
` [PATCH 1/2] mfd: mc13xxx: add function returning mc13xxx type
` [PATCH 2/2] aiodev: mc13xxx: add adc support

[PATCH] video: IPUv3-LDB: demote dual-channel message to info level
 2018-04-09  6:57 UTC  (2+ messages)

[PATCH] fb: reject enable request when framebuffer has no mode
 2018-04-09  6:57 UTC  (2+ messages)

[PATCH 00/78] ARM aarch64 updates
 2018-04-09  6:55 UTC  (17+ messages)
` [PATCH 03/78] ARM: return positive offset in get_runtime_offset()
` [PATCH 30/78] ARM: aarch64: Add relocation support
  ` [PATCH v2 "
` [PATCH 57/78] ARM: aarch64: remove dead code in linker script
` [PATCH 61/78] ARM: aarch64: mmu: Make zero page faulting
` [PATCH 65/78] ARM: aarch64: implement ignoring data aborts
` [PATCH 66/78] dt-bindings: Drop unused files
` [PATCH 72/78] ARM: aarch64: Add support to start kernel and barebox
` [PATCH 74/78] ARM: build: Remove duplicate file compilation
` [PATCH 75/78] ARM: Create own cache.c file for aarch64

[PATCH] net: on ifup -a only detect devices when necessary
 2018-04-09  6:51 UTC  (3+ messages)

v2018.04.0
 2018-04-06 12:41 UTC 

[PATCH] Documentation: framebuffer: update documentation to current state
 2018-04-04 12:48 UTC  (3+ messages)

[PATCH 00/19] Add Linux dcache implementation
 2018-04-03  7:48 UTC  (20+ messages)
` [PATCH 01/19] rename file_operations -> cdev_operations
` [PATCH 02/19] ubifs: remove dead code
` [PATCH 03/19] ubifs: Remove Linux struct definitions we already have
` [PATCH 04/19] ubifs: remove dead code
` [PATCH 05/19] fs: Add super_operations
` [PATCH 06/19] fs: Move mem_write/mem_read to devfs-core
` [PATCH 07/19] fs: Cleanup whitespace damage
` [PATCH 08/19] fs: Fix finding correct directory for mkdir/rmdir
` [PATCH 09/19] glob: do not unnecessarily opendir() a directory
` [PATCH 10/19] ls: Do not depend on normalise_path()
` [PATCH 11/19] loadenv: "
` [PATCH 12/19] fs: dcache implementation
` [PATCH 13/19] fs: ramfs: Switch to "
` [PATCH 14/19] fs: devfs: "
` [PATCH 15/19] fs: ext4: "
` [PATCH 16/19] fs: ubifs: "
` [PATCH 17/19] fs: nfs: "
` [PATCH 18/19] fs: tftp: "
` [PATCH 19/19] block: Adjust cache sizes

[PATCH 0/3] APBH DMA fixes for i.MX7
 2018-04-03  7:12 UTC  (6+ messages)
` [PATCH 1/3] clk: i.MX7: Port NAND clock setup code from Linux
` [PATCH 2/3] clk: Forward declare struct of_device_id in linux/clk.h
` [PATCH 3/3] dma: apbh: Enable clock as a part of probing
` [PATCH] Revert "startup: Load default environment earlier"

[PATCH] aiodev: Constify 'unit' in 'struct aiodev'
 2018-04-03  7:08 UTC  (2+ messages)

[PATCH] lib: Port CRC-CCITT functions from Linux kernel
 2018-04-03  7:08 UTC  (2+ messages)

[PATCH] of: partition: fix typo when writing #address-cells
 2018-03-29  7:02 UTC  (2+ messages)

socfpga: ethernet problem
 2018-03-27  9:21 UTC  (3+ messages)

[PATCH] fs: check pointer returned by get_fsdevice_by_path before dereferencing
 2018-03-27  7:17 UTC  (4+ messages)

[PATCH v2 01/10] ARM: import opcode helpers from Linux kernel
 2018-03-26 10:06 UTC  (14+ messages)
` [PATCH v2 02/10] ARM: safely switch from HYP to SVC mode if required
` [PATCH v2 03/10] ARM: allow secure monitor code to be built without PSCI
` [PATCH v2 04/10] ARM: add file for HYP mode related setup
` [PATCH v2 05/10] ARM: don't try to install secure monitor when entered in HYP mode
` [PATCH v2 06/10] ARM: default to starting kernel in HYP mode when entered in HYP
` [PATCH v2 07/10] ARM: install HYP vectors at PBL and Barebox entry
` [PATCH v2 08/10] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
` [PATCH v2 09/10] ARM: rpi: add raspberry pi 3 support
` [PATCH v2 10/10] ARM: rpi: autosize malloc area

[PATCH] video: tc358767: set num_modes=0 if no valid mode found
 2018-03-26  7:25 UTC  (2+ messages)

[PATCH 0/4] i.MX53/TX53: rework to dts, fix and add samsung variant
 2018-03-26  7:23 UTC  (6+ messages)
` [PATCH 1/4] i.MX53/TX53: cfg revxx30: don't disable usb clks, so imx-usb-loader works
` [PATCH 2/4] i.MX53/TX53: rework to dts based boot
` [PATCH 3/4] i.MX/DCD compiler and interpreter: logic is different
` [PATCH 4/4] i.MX53/TX53: add new samsung based xx30 variant

[PATCH 1/2] mtd: nand: Add Winbond manufacturer ID
 2018-03-22  7:54 UTC  (2+ messages)
` [PATCH 2/2] mtd: spi-nor: add manufacturer IDs for ISSI and Winbond

[PATCH v3] watchdog: add watchdog poller
 2018-03-21  8:14 UTC  (2+ messages)

[PATCH v2 0/2] Add support for kontron samx6i boards
 2018-03-21  8:04 UTC  (5+ messages)
` [PATCH v2 1/2] ARM: i.MX: Add lowlevel gpio input functions
` [PATCH v2 2/2] boards: samx6: add initial support for kontron samx6i

[PATCH 00/14] ARM: i.MX8MQ and EVK support
 2018-03-21  5:41 UTC  (16+ messages)
` [PATCH 01/14] ARM: i.MX: xload: Fix compiler warning
` [PATCH 02/14] ARM: i.MX: compile arm32 specific errata only for CPU32
` [PATCH 03/14] ARM: Add i.MX8 support
` [PATCH 04/14] aarch64: Add i.MX8 debug UART support
` [PATCH 05/14] Include our own include/dt-bindings
` [PATCH 06/14] ARM: i.MX8: Add i.MX8mq EVK support
` [PATCH 07/14] mci: imx-esdhc: use dma mapping functions
` [PATCH 08/14] net: fec_imx: remove unnecessary DMA sync ops
` [PATCH 09/14] net: fec_imx: Use dma mapping functions
` [PATCH 10/14] clock: Add i.MX8MQ clock driver
` [PATCH 11/14] serial: i.MX: Add i.MX8 support
` [PATCH 12/14] mmc: i.MX esdhc: "
` [PATCH 13/14] gpio: i.MX: Add i.MX8mq support
` [PATCH 14/14] ARM: i.MX: ocotp: Add i.MX8MQ support

[PATCH] reset-source: pass reset reason to kernel via device tree
 2018-03-19 11:57 UTC 

[PATCH] of: Pass barebox version to kernel
 2018-03-19 10:30 UTC 

[PATCH] Revert "startup: Load default environment earlier"
 2018-03-19  8:29 UTC 

[PATCH] ARM: i.MX50: Amazon Kindle: fix setup of board specific environment
 2018-03-19  8:28 UTC  (2+ messages)

[PATCH] of: demote "no ranges" message to debug level
 2018-03-19  8:05 UTC  (2+ messages)

[PATCH v2 1/6] watchdog: rename dev to hwdev
 2018-03-19  8:01 UTC  (3+ messages)
` [PATCH v2 6/6] watchdog: add watchdog poller

[PATCH] ARM: AM335x: Fix invalid register access
 2018-03-19  7:54 UTC 

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox