[PATCH 00/58] PCI i.MX6/DesignWare sync up with 4.20-rc1
2018-12-13 7:11 UTC (40+ messages)
` [PATCH 01/58] PCI: desginware: Remove bogus prototypes
` [PATCH 02/58] PCI: designware: Consolidate outbound iATU programming functions
` [PATCH 03/58] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM
` [PATCH 04/58] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK
` [PATCH 05/58] PCI: designware: Use exact access size in dw_pcie_cfg_read()
` [PATCH 06/58] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
` [PATCH 07/58] PCI: designware: Require config accesses to be naturally aligned
` [PATCH 08/58] PCI: designware: Make "num-lanes" an optional DT property
` [PATCH 09/58] PCI: designware: Ensure ATU is enabled before IO/conf space accesses
` [PATCH 10/58] PCI: designware: Simplify control flow
` [PATCH 11/58] PCI: designware: Make config accessor override checking symmetric
` [PATCH 12/58] PCI: designware: Explain why we don't program ATU for some platforms
` [PATCH 13/58] PCI: imx6: Move link up check into imx6_pcie_wait_for_link()
` [PATCH 14/58] PCI: designware: Add generic dw_pcie_wait_for_link()
` [PATCH 15/58] PCI: designware: Add default link up check if sub-driver doesn't override
` [PATCH 16/58] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()
` [PATCH 17/58] PCI: designware: Remove incorrect RC memory base/limit configuration
` [PATCH 18/58] PCI: designware: Return data directly from dw_pcie_readl_rc()
` [PATCH 19/58] PCI: designware: Move link wait definitions to .c file
` [PATCH 20/58] PCI: designware: Wait for iATU enable
` [PATCH 21/58] PCI: designware: Check LTSSM training bit before deciding link is up
` [PATCH 22/58] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2
` [PATCH 23/58] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs'
` [PATCH 24/58] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device()
` [PATCH 25/58] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces
` [PATCH 26/58] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments
` [PATCH 27/58] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc()
` [PATCH 28/58] PCI: dwc: designware: Move register defines to designware header file
` [PATCH 29/58] PCI: dwc: all: Rename cfg_read/cfg_write to read/write
` [PATCH 30/58] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
` [PATCH 31/58] PCI: imx6: Add local struct device pointers
` [PATCH 32/58] PCI: imx6: Removed unused struct imx6_pcie.mem_base
` [PATCH 34/58] PCI: imx6: Pass device-specific struct to internal functions
` [PATCH 38/58] PCI: imx6: Remove unused return values
` [PATCH 39/58] PCI: imx6: Factor out ref clock enable
` [PATCH 40/58] PCI: imx6: Add DT property for link gen, default to Gen1
` [PATCH 41/58] PCI: imx6: Remove redundant "Link never came up" message
` [PATCH 45/58] PCI: dwc: designware: Fix style errors in pcie-designware.c
` [PATCH 50/58] PCI: Fix typos and whitespace errors
[PATCH 1/3] serial: amba-pl011: Fix regulator_get() return check
2018-12-13 7:10 UTC (3+ messages)
` [PATCH 2/3] mci: Rely on NULL being a dummy regulator
` [PATCH 3/3] video: mtl017: Make sure errno is not used as a regulator pointer
[PATCH v3 00/10] MIPS: migrate to multiimage support
2018-12-13 7:10 UTC (8+ messages)
` [PATCH v3 08/10] MIPS: port all mach* to multiimage
[PATCH] globalvar: fix crash if CONFIG_NVVAR is not set
2018-12-13 7:06 UTC (2+ messages)
[PATCH 1/4] net/e1000: Map custom error codes to more appropriate errno values
2018-12-13 7:03 UTC (4+ messages)
` [PATCH 2/4] net/e1000: Do not discard EEPROM error code in e1000_setup_link()
` [PATCH 3/4] net/e1000: Use dev_err to report error
` [PATCH 4/4] net/e1000: Only read EEPROM_INIT_CONTROL2_REG if it is needed
[PATCH 1/3] Documentation: i.MX: improve wording, add markup and missing articles
2018-12-13 6:57 UTC (4+ messages)
` [PATCH 2/3] Documentation: state: fix closing brace without opening brace
` [PATCH 3/3] Documentation: i.MX: Kindle 4/5: fix sphinx warnings
[PATCH 1/2] mfd: rave-sp: Add parameters to query IP address/netmask
2018-12-13 6:50 UTC (3+ messages)
` [PATCH 2/2] backlight: rave-sp: init all brightness to default level
[PATCH] clk: imx5: add di_pred
2018-12-13 6:47 UTC (2+ messages)
[PATCH] ARM: rdu2: add command to reset network switch
2018-12-13 6:47 UTC (2+ messages)
[PATCH] ARM: fix setup_c when runtime offset is != 0
2018-12-13 6:40 UTC
[PATCH] scripts/mkcompile_h: Remove trailing spaces from compiler version
2018-12-13 6:34 UTC
[PATCH] imd: model and compatible missing in metadata
2018-12-13 6:33 UTC
[PATCH 0/6] Raspberry Pi miniuart support
2018-12-12 14:58 UTC (9+ messages)
` [PATCH 1/6] mach-bcm2835/core: add clkdev for uart1
` [PATCH 2/6] serial_ns16550: handle default reg-io-width
` [PATCH 3/6] serial_ns16550: add raspberry pi compatible and init
` [PATCH 4/6] ARM: rpi: add NS16550 support
` [PATCH 5/6] bcm2837-rpi-3: choose miniuart as stdout
` [PATCH 6/6] doc: bcm283x: remove miniuart overlay instruction
CCMX51 is not boot anymore
2018-12-11 8:17 UTC (2+ messages)
[PATCH] lib/xymodem: Decrease read block timeout
2018-12-11 2:14 UTC (2+ messages)
[PATCH] phycard-imx27: add support for 64MB RAM variants
2018-12-10 9:19 UTC (2+ messages)
[PATCH v2 0/4] Xilinx Zynq Ultrascale+ MPSoC support
2018-12-10 9:13 UTC (7+ messages)
` [PATCH v3 "
` [PATCH v3 1/4] ARM: lib64: .gitignore barebox.lds
` [PATCH v3 2/4] ARM: aarch64: compile with general-regs-only
` [PATCH v3 3/4] ARM: aarch64: add ENTRY_PROC macro for arm64
` [PATCH v3 4/4] ARM: zynqmp: add support for Xilinx ZCU104 board
[PATCH] Documentation: i.MX: Document how to use GPT
2018-12-10 9:05 UTC (2+ messages)
[PATCH 1/6] mci: core: Use alias as a devname by default
2018-12-10 9:03 UTC (7+ messages)
` [PATCH 2/6] mci: tegra-sdmmc: Drop explicit devname setup code
` [PATCH 3/6] mci: dw_mmc: "
` [PATCH 4/6] mci: omap_hsmmc: "
` [PATCH 5/6] mci: imx-esdhc: "
` [PATCH 6/6] mci: mxs: "
[PATCH] lib/parameter: Fix typecases to match corresponding PARAM_TYPE_*
2018-12-10 8:57 UTC (2+ messages)
[PATCH] nvmem: ocotp: Make use of postcore_platform_driver macro
2018-12-10 8:56 UTC (2+ messages)
[PATCH 1/3] led: core: Don't call get_time_us() twice
2018-12-10 8:54 UTC (4+ messages)
` [PATCH 2/3] led: core: Initialize blink_next_event with 0
` [PATCH 3/3] led: core: Make use of ARRAY_AND_SIZE
[PATCH] commands: boot: Remove useless code
2018-12-10 8:54 UTC (2+ messages)
[PATCH] mfd: rave-sp: Make use of wait_on_timeout()
2018-12-10 8:53 UTC (2+ messages)
[PATCH] net: lib: Make use of ETH_ALEN
2018-12-10 8:53 UTC (2+ messages)
[PATCH 1/4] driver: left shift 1U instead of 1 in bitmask for consistency
2018-12-10 8:39 UTC (7+ messages)
` [PATCH 2/4] of: partition: use NULL instead of never-read argument
` [PATCH 3/4] of: partitions: make macro name more generic
` [PATCH 4/4] of: partition: add no-fixup device tree property
[PATCH 00/15] Makefile: sync with linux v4.13 and add thin archives support
2018-12-09 23:07 UTC (10+ messages)
` [PATCH 02/15] Makefile: Correctly deal with make options which contain an "s"
` [PATCH 04/15] scripts/Kbuild.include: replace KBUILD_CPPFLAGS with CPPFLAGS
` [PATCH 07/15] Makefile: link of barebox moved to script
GPIO support missing for SoCFPGA?
2018-12-07 15:35 UTC (3+ messages)
[PATCH 0/7] Fastboot improvements
2018-12-07 10:34 UTC (8+ messages)
` [PATCH 1/7] usb: gadget: fastboot: pass message type as enum
` [PATCH 2/7] usb: gadget: fastboot: drop unnecessary global variable
` [PATCH 3/7] usb: gadget: fastboot: remove unnecessary context setting
` [PATCH 4/7] usb: gadget: fastboot: tell host that we are going to shutdown
` [PATCH 5/7] usb: gadget: fastboot: be more informative on booting
` [PATCH 6/7] usb: gadget: fastboot: simplify reboot
` [PATCH 7/7] usb: gadget: fastboot: print fastboot messages also to the logs
[PATCH 1/4] ARM: imx: select OFDEVICE for VF610
2018-12-07 9:01 UTC (7+ messages)
` [PATCH 2/4] of: remove non-existent of_match_ptr
` [PATCH 3/4] ARM: at91: add architecture dependecy to KSZ9477_EVB board
` [PATCH 4/4] scripts: imx-image: fix build with OpenSSL < 1.1.0
v2018.12.0
2018-12-07 7:34 UTC
[PATCH v1] drivers: net: usb: convert drivers to spdx
2018-12-07 6:57 UTC (2+ messages)
[PATCH v2] drivers: net: phy: convert drivers to spdx
2018-12-07 6:56 UTC (2+ messages)
[PATCH 1/3] ARM: dts: phyCORE-i.MX 6UL: Enable USB host port
2018-12-06 8:10 UTC (4+ messages)
` [PATCH 2/3] ARM: dts: phyCORE-i.MX 6UL/ULL: Enable USB OTG on port 1
` [PATCH 3/3] ARM: phytec-som-imx6: Add full featured phyCORE-i.MX 6ULL
issues communicating with SPI on Raspberry Pi 3
2018-12-06 8:03 UTC (2+ messages)
[PATCH v2 0/4] checkpatch.pl: add ability to ignore various messages
2018-12-06 7:57 UTC (7+ messages)
` [PATCH v2 1/4] "
` [PATCH v2 2/4] checkpatch.pl: check for common memset parameter issues against statements
` [PATCH v2 3/4] checkpatch.pl: use SPDX tag
` [PATCH v2 4/4] checkpatch.pl: check for #if 0/#if 1
[PATCH] documentation: document eMMC boot{0,1}-partitions binding
2018-12-06 7:41 UTC (2+ messages)
` [PATCH] documentation: document eMMC boot{0, 1}-partitions binding
[PATCH v2] drivers: net: convert drivers to spdx
2018-12-06 7:41 UTC (3+ messages)
[PATCH v1] drivers: net: phy: convert drivers to spdx
2018-12-05 18:57 UTC (3+ messages)
[PATCH 0/4] checkpatch.pl: port misc linux commits
2018-12-05 13:11 UTC (5+ messages)
` [PATCH 1/4] checkpatch.pl: add ability to ignore various messages
` [PATCH 2/4] checkpatch.pl: check for common memset parameter issues against statements
` [PATCH 3/4] checkpatch.pl: use SPDX tag
` [PATCH 4/4] checkpatch.pl: check for #if 0/#if 1
[PATCH] phytec-som-imx6: ksz8081_phy_fixup: Don't override B-CAST_OFF strap-in
2018-12-05 7:55 UTC (2+ messages)
[PATCH] common/parser.c: s/%d/%zu/ when printing size_t
2018-12-05 7:53 UTC (2+ messages)
[PATCH] lib: bootstrap: fix instance of possibly mismatched pointer sizes
2018-12-05 7:52 UTC (2+ messages)
[PATCH] nvmem: ocotp: Add support for second mac address fuses on imx6ul
2018-12-05 7:51 UTC (2+ messages)
[PATCH 1/2] mtd: spi-nor: Add support for sst25wf020a
2018-12-05 7:50 UTC (3+ messages)
` [PATCH 2/2] mtd: spi-nor: Add support for sst25wf040b
[PATCH] arm: common: document safe usage of arm_setup_stack
2018-12-04 9:15 UTC
[PATCH v1] drivers: net: convert drivers to spdx
2018-12-04 8:56 UTC (4+ messages)
[PATCH v2 1/2] drivers: caam: add RNG software self-test
2018-12-04 8:20 UTC (4+ messages)
` [PATCH] fixup! "
[PATCH v1] defaultenv-2: add bnet script to second stage barebox over net
2018-12-04 7:59 UTC (2+ messages)
[PATCH] net: macb: dma_sync_* receive buffers
2018-12-04 7:58 UTC (3+ messages)
[PATCH] serdev: select POLLER
2018-12-04 7:33 UTC (3+ messages)
[PATCH v2 1/2] drivers: caam: add RNG software self-test
2018-12-04 7:31 UTC (3+ messages)
` [PATCH] fixup! "
ubifs
2018-12-03 13:35 UTC (5+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox