[PATCH v2 1/3] MIPS: migrate all files to SPDX
2018-12-29 22:48 UTC (4+ messages)
` [PATCH v2 2/3] MIPS: convert files with not precise GNU version "
` [PATCH v2 3/3] MIPS: update to GPL-2.0-or-later for files copyrighted by me
[PATCH] Documentation: imx8mq-evk: Pass the full path for file names
2018-12-27 18:57 UTC
[PATCH 1/2] imx-bbu-nand-fcb: Check the required space a bit earlier
2018-12-25 6:59 UTC (2+ messages)
` [PATCH 2/2] imx-bbu-nand-fcb: Remove unused variable partition_size
[PATCH] fs/fat: fix FAT32 detection
2018-12-24 10:16 UTC
[PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision
2018-12-24 6:24 UTC (2+ messages)
` [PATCH V3 2/2] ARM: CCMX51: Switch to multiimage support
MIPS multiimabe is brocken after "Images: Add image size to built images"
2018-12-22 10:03 UTC (5+ messages)
[PATCH] imd: model and compatible missing in metadata
2018-12-20 12:54 UTC (4+ messages)
[PATCH 01/10] serial: clps711x: Change compatible string
2018-12-20 7:57 UTC (11+ messages)
` [PATCH 02/10] serial: clps711x: Switch to SPDX identifier
` [PATCH 03/10] serial: clps711x: Use DIV_ROUND_CLOSEST() for baudrate calculation
` [PATCH 04/10] serial: clps711x: Determine device name from device tree
` [PATCH 05/10] gpio: clps711x: Change compatible string
` [PATCH 06/10] gpio: clps711x: Switch to SPDX identifier
` [PATCH 07/10] gpio: clps711x: Use coredevice_platform_driver() macro
` [PATCH 08/10] clocksource: clps711x: Add devicetree support
` [PATCH 09/10] clocksource: clps711x: Switch to SPDX identifier
` [PATCH 10/10] clocksource: clps711x: Use coredevice_platform_driver() macro
[PATCH for next] mtd: nand: nand_omap_gpmc: Fix GPMC_BCH_RESULT offset
2018-12-20 7:52 UTC (2+ messages)
[PATCH] nvmem: ocotp: Fix writing of second mac address fuses on imx6ul
2018-12-19 14:07 UTC
bareboxenv -s: output depends on filesystem
2018-12-19 14:02 UTC (7+ messages)
` [PATCH 1/2] recursive_action: add ACTION_SORT flag
` [PATCH 2/2] envfs: new flag for sorting env before saving
` [PATCH v2 1/2] recursive_action: add ACTION_SORT flag
` [PATCH v2 2/2] envfs: new flag for sorting env before saving
[PATCH v5 0/9] Raspberry Pi miniuart support
2018-12-19 11:28 UTC (17+ messages)
` [PATCH v5 1/9] ARM: rpi: fix typo in rpi-common.c
` [PATCH v5 2/9] ARM: rpi: move clks into board specific rpi-common
` [PATCH v5 3/9] ARM: rpi: retrieve miniuart clock from firmware
` [PATCH v5 4/9] serial_ns16550: handle default reg-io-width
` [PATCH v5 5/9] serial_ns16550: add raspberry pi compatible and init
` [PATCH v5 6/9] ARM: rpi: add NS16550 support
` [PATCH v5 7/9] ARM: rpi: choose miniuart as stdout
` [PATCH v5 8/9] doc: bcm283x: remove miniuart overlay instruction
` [PATCH v5 9/9] ARM: rpi: use defines for uart bases
[PATCH] commands: nand-bitflip: Add documentation for option '-c'
2018-12-18 14:08 UTC (2+ messages)
[PATCH v1 1/3] MIPS: migrate all files to SPDX
2018-12-18 10:52 UTC (8+ messages)
` [PATCH v1 2/3] MIPS: convert files with not precise GNU version "
` [PATCH v1 3/3] MIPS: update to GPL-2.0-or-later for files copyrighted by me
[PATCH v4 0/7] Raspberry Pi miniuart support
2018-12-18 8:45 UTC (15+ messages)
` [PATCH v4 1/7] ARM: rpi: move clks into board specific rpi-common
` [PATCH v4 2/7] ARM: rpi: retrieve miniuart clock from firmware
` [PATCH v4 3/7] serial_ns16550: handle default reg-io-width
` [PATCH v4 4/7] serial_ns16550: add raspberry pi compatible and init
` [PATCH v4 5/7] ARM: rpi: add NS16550 support
` [PATCH v4 6/7] ARM: rpi: choose miniuart as stdout
` [PATCH v4 7/7] doc: bcm283x: remove miniuart overlay instruction
[PATCH v3 00/10] Add initial RISC-V architecture support
2018-12-18 8:33 UTC (12+ messages)
` [PATCH v3 01/10] "
` [PATCH v3 02/10] RISC-V: add Erizo SoC support
` [PATCH v3 03/10] RISC-V: add low-level debug macros for ns16550
` [PATCH v3 04/10] RISC-V: add nmon nano-monitor
` [PATCH v3 05/10] RISC-V: erizo: add DEBUG_LL support
` [PATCH v3 06/10] RISC-V: erizo: enable nmon
` [PATCH v3 07/10] RISC-V: erizo: add nmon image creation
` [PATCH v3 08/10] RISC-V: add erizo_generic_defconfig
` [PATCH v3 09/10] scripts: add nmon-loader
` [PATCH v3 10/10] Documentation: add RISC-V docs
[PATCH 00/23] AM3517 support
2018-12-18 7:46 UTC (10+ messages)
` [PATCH 14/23] ARM: omap: dmtimer: Turn into a driver
` [PATCH 15/23] ARM: omap: 32ktimer: "
` [PATCH 20/23] ARM: omap: Add emif4 support for AM3517
` [PATCH 22/23] ARM: omap: Add board support for WAGO pfc200 platform
` [PATCH 23/23] ARM: omap: am33xx_defconfig: Enable more boards and rename
AM335x NAND boot on next
2018-12-18 7:44 UTC (4+ messages)
[PATCH for next] mtd: nand: nand_base: Fix compile warning if CONFIG_MTD_WRITE is not enabled
2018-12-18 7:15 UTC (2+ messages)
[PATCH 1/2] arm: boards: vscom-baltos: Run environment_initcall only on correct board
2018-12-18 7:14 UTC (3+ messages)
` [PATCH 2/2] arm: dts: am335x strip: Don't strip timer2 anymore
[PATCH V2 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision
2018-12-17 11:22 UTC (6+ messages)
` [PATCH V2 2/2] ARM: CCMX51: Switch to multiimage support
[PATCH v1] MIPS: bcm47xx: migrate to multiimage
2018-12-17 11:02 UTC
[PATCH 1/2] include/linux/time.h: define USEC_PER_SEC and friends
2018-12-17 9:50 UTC (5+ messages)
` [PATCH 2/2] net: fec_imx: fix timeout off by *1000 error
[PATCH 1/3] Documentation: i.MX: improve wording, add markup and missing articles
2018-12-17 9:45 UTC (4+ messages)
[PATCH 1/4] net/e1000: Map custom error codes to more appropriate errno values
2018-12-17 9:42 UTC (2+ messages)
[PATCH v3 0/7] Raspberry Pi miniuart support
2018-12-17 8:06 UTC (9+ messages)
` [PATCH v3 1/7] ARM: rpi: move clks into board specific rpi-common
` [PATCH v3 2/7] ARM: rpi: retrieve miniuart clock from firmware
` [PATCH v3 3/7] serial_ns16550: handle default reg-io-width
` [PATCH v3 4/7] serial_ns16550: add raspberry pi compatible and init
` [PATCH v3 5/7] ARM: rpi: add NS16550 support
` [PATCH v3 6/7] ARM: rpi: choose miniuart as stdout
` [PATCH v3 7/7] doc: bcm283x: remove miniuart overlay instruction
[PATCH v2 00/65] PCI i.MX6/DesignWare sync up with 4.20-rc1
2018-12-17 5:19 UTC (66+ messages)
` [PATCH v2 01/65] PCI: desginware: Remove bogus prototypes
` [PATCH v2 02/65] PCI: designware: Consolidate outbound iATU programming functions
` [PATCH v2 03/65] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM
` [PATCH v2 04/65] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK
` [PATCH v2 05/65] PCI: designware: Use exact access size in dw_pcie_cfg_read()
` [PATCH v2 06/65] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
` [PATCH v2 07/65] PCI: designware: Require config accesses to be naturally aligned
` [PATCH v2 08/65] PCI: designware: Make "num-lanes" an optional DT property
` [PATCH v2 09/65] PCI: designware: Ensure ATU is enabled before IO/conf space accesses
` [PATCH v2 10/65] PCI: designware: Simplify control flow
` [PATCH v2 11/65] PCI: designware: Make config accessor override checking symmetric
` [PATCH v2 12/65] PCI: designware: Explain why we don't program ATU for some platforms
` [PATCH v2 13/65] PCI: imx6: Move link up check into imx6_pcie_wait_for_link()
` [PATCH v2 14/65] PCI: designware: Add generic dw_pcie_wait_for_link()
` [PATCH v2 15/65] PCI: designware: Add default link up check if sub-driver doesn't override
` [PATCH v2 16/65] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()
` [PATCH v2 17/65] PCI: designware: Remove incorrect RC memory base/limit configuration
` [PATCH v2 18/65] PCI: designware: Return data directly from dw_pcie_readl_rc()
` [PATCH v2 19/65] PCI: designware: Move link wait definitions to .c file
` [PATCH v2 20/65] PCI: designware: Wait for iATU enable
` [PATCH v2 21/65] PCI: designware: Add iATU Unroll feature
` [PATCH v2 22/65] PCI: designware: Check LTSSM training bit before deciding link is up
` [PATCH v2 23/65] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2
` [PATCH v2 24/65] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs'
` [PATCH v2 25/65] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device()
` [PATCH v2 26/65] PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll()
` [PATCH v2 27/65] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces
` [PATCH v2 28/65] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments
` [PATCH v2 29/65] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc()
` [PATCH v2 30/65] PCI: designware: Uninline register accessors
` [PATCH v2 31/65] PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments
` [PATCH v2 32/65] PCI: designware: Check for iATU unroll only on platforms that use ATU
` [PATCH v2 33/65] PCI: dwc: designware: Move register defines to designware header file
` [PATCH v2 34/65] PCI: dwc: all: Rename cfg_read/cfg_write to read/write
` [PATCH v2 35/65] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
` [PATCH v2 36/65] PCI: imx6: Add local struct device pointers
` [PATCH v2 37/65] PCI: imx6: Removed unused struct imx6_pcie.mem_base
` [PATCH v2 38/65] PCI: imx6: Pass struct imx6_pcie to PHY accessors
` [PATCH v2 39/65] PCI: imx6: Pass device-specific struct to internal functions
` [PATCH v2 40/65] PCI: imx6: Use generic DesignWare accessors
` [PATCH v2 41/65] PCI: imx6: Reorder struct imx6_pcie
` [PATCH v2 42/65] PCI: imx6: Port error messages for imx6_pcie_deassert_core_reset()
` [PATCH v2 43/65] PCI: imx6: Remove unused return values
` [PATCH v2 44/65] PCI: imx6: Factor out ref clock enable
` [PATCH v2 45/65] PCI: imx6: Add DT property for link gen, default to Gen1
` [PATCH v2 46/65] PCI: imx6: Remove redundant "Link never came up" message
` [PATCH v2 47/65] PCI: imx6: Remove LTSSM disable workaround
` [PATCH v2 48/65] PCI: dwc: all: Split struct pcie_port into host-only and core structures
` [PATCH v2 49/65] PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
` [PATCH v2 50/65] PCI: dwc: designware: Fix style errors in pcie-designware.c
` [PATCH v2 51/65] PCI: dwc: Split pcie-designware.c into host and core files
` [PATCH v2 52/65] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
` [PATCH v2 53/65] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
` [PATCH v2 54/65] PCI: dwc: designware: Move _unroll configurations to a separate function
` [PATCH v2 55/65] PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically
` [PATCH v2 56/65] PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static
` [PATCH v2 57/65] PCI: Fix typos and whitespace errors
` [PATCH v2 58/65] PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
` [PATCH v2 59/65] PCI: dwc: Replace lower into upper case characters
` [PATCH v2 60/65] PCI: dwc: designware: Handle ->host_init() failures
` [PATCH v2 61/65] PCI: dwc: Add accessors for write permission of DBI
` [PATCH v2 62/65] PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates
` [PATCH v2 63/65] PCI: dwc: Fix enumeration end when reaching root subordinate
` [PATCH v2 64/65] PCI: dwc: Small computation improvement
` [PATCH v2 65/65] PCI: dwc: Constify dw_pcie_host_ops structures
[PATCH] arm: common: document safe usage of arm_setup_stack
2018-12-14 15:32 UTC (2+ messages)
[PATCH 1/4] driver: left shift 1U instead of 1 in bitmask for consistency
2018-12-14 15:31 UTC (6+ messages)
` [PATCH 4/4] of: partition: add no-fixup device tree property
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox