Cross-compiling target tools
2020-03-26 16:00 UTC (4+ messages)
imx7d dual core boot
2020-03-26 10:21 UTC
[PATCH 0/3] usb: gadget: dfu: Fix timeout on erase when using big partition
2020-03-26 9:08 UTC (7+ messages)
` [PATCH 1/3] usb: gadget: dfu: Add manifestation phase
` [PATCH 2/3] usb: gadget: dfu: Progressive erase if file is a mtd
` [PATCH 3/3] usb: gadget: dfu: Reset global variables on unbind
[PATCH 00/24] USB3 support
2020-03-26 6:22 UTC (27+ messages)
` [PATCH 01/24] usb: hub: Make debugging output more consistent
` [PATCH 02/24] usb: hub: do not reset devices twice
` [PATCH 03/24] usb: hub: let usb_scan_port() return void
` [PATCH 04/24] usb: Remove hack from the early days
` [PATCH 05/24] usb: Pass portstatus/portchange to usb_hub_port_connect_change()
` [PATCH 06/24] usb: hub: Do not power-cycle usb devices on init
` [PATCH 07/24] usb: Make driver_info const
` [PATCH 08/24] usb: Set new USB device name earlier
` [PATCH 09/24] usb: Use dev_*
` [PATCH 10/24] usb: hub: Parse and save TT details from device descriptor
` [PATCH 11/24] usb: host: make init hook optional
` [PATCH 12/24] usb: support set hub depth request for USB 3.0 hubs
` [PATCH 13/24] usb: Assign dev_index once
` [PATCH 14/24] usb: remove unnecessary variable
` [PATCH 15/24] usb: net: Allocate rx buffer dynamically
` [PATCH 16/24] usb: net: Allocate tx "
` [PATCH 17/24] net: usb: add hook for link changes
` [PATCH 18/24] usb: net: Add support for the Asix AX88179
` [PATCH 19/24] usb: factor out a usb_setup_descriptor() function
` [PATCH 20/24] usb: hub: Translate USB 3.0 hub port status into old version
` [PATCH 21/24] usb: Add super speed support
` [PATCH 22/24] usb: hub: When no connection came up remove from scanning list
` [PATCH 23/24] usb: host: remove xhci driver
` [PATCH 24/24] usb: Add U-Boot "
[PATCH 3/3] kconfig: update to Linux 5.5
2020-03-26 6:17 UTC (2+ messages)
[PATCH 2/3] kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
2020-03-26 6:16 UTC (2+ messages)
[PATCH 1/3] kbuild: remove clean-dirs syntax
2020-03-26 6:14 UTC (2+ messages)
[PATCH 0/2] Allow parsing more than one memory node
2020-03-25 17:27 UTC (12+ messages)
` [PATCH 1/2] of: base: parse all available memory nodes
` [PATCH 2/2] of: base: allow of_add_memory to be called multiple times
` [PATCH v2 0/2] Allow parsing more than one memory node
` [PATCH v2 1/2] of: base: allow of_add_memory to be called multiple times
` [PATCH v2 2/2] of: base: parse all available memory nodes
am335x: load a kernel with integrated initramfs
2020-03-25 15:36 UTC (8+ messages)
[PATCH 0/5] Add fsl-dspi driver support
2020-03-25 8:36 UTC (6+ messages)
` [PATCH 1/5] regmap-mmio: Add missing pieces for 64bit support
` [PATCH 2/5] regmap-mmio: Add big endian support
` [PATCH 3/5] spi: validate spi messages
` [PATCH 4/5] spi: Add fsl-dspi driver
` [PATCH 5/5] mtd: spi-nor: Add support for cy15x104q
[PATCH 1/2] ARM: Layerscape: Be less noisy when no iommu node found
2020-03-24 13:16 UTC (2+ messages)
` [PATCH 2/2] PCI: layerscape: be less noisy when no iommu node is found
Barebox for Zedboard
2020-03-23 15:18 UTC (4+ messages)
` AW: "
[PATCH] common: fix typos found with codespell
2020-03-23 7:23 UTC (2+ messages)
[PATCH] reset: remove duplicate imx8mq-reset.h and use correct defines
2020-03-23 7:20 UTC (2+ messages)
[PATCH] common: oftree: trim leading spaces from bootargs
2020-03-23 7:19 UTC (2+ messages)
suspicious header files diff
2020-03-20 17:16 UTC (2+ messages)
[PATCH] crypto: pbkdf2: Select HMAC
2020-03-18 18:23 UTC
v2020.03.0
2020-03-18 7:30 UTC
[PATCH] reset: add missing stub for device_reset()
2020-03-17 18:45 UTC (3+ messages)
[PATCH] ARM: phytec-som-imx6: Add imx6dl with 512mb RAM
2020-03-16 11:29 UTC (2+ messages)
[PATCH] pinctrl-single: fix parsing of `pinctrl-single, bits` property
2020-03-16 11:27 UTC (2+ messages)
` [PATCH] pinctrl-single: fix parsing of `pinctrl-single,bits` property
[PATCH v3 00/19] Protect code from pollers
2020-03-16 8:04 UTC (22+ messages)
` [PATCH 01/19] net: fec_imx: Do not clear MII interrupt during receive
` [PATCH 02/19] miitool: Use mdiobus_read()
` [PATCH 03/19] net: phy: mdio-mux: Use mdiobus_read/write()
` [PATCH 04/19] net: Open ethernet devices explicitly
` [PATCH 05/19] poller: Give pollers a name
` [PATCH 06/19] poller: Add a poller command
` [PATCH 07/19] Introduce slices
` [PATCH 08/19] net: Add a slice to struct eth_device
` [PATCH 09/19] net: mdiobus: Add slice
` [PATCH 10/19] usb: Add a slice to usb host controllers
` [PATCH 11/19] usbnet: Add slice
` [PATCH 12/19] net: Call net_poll() in a poller
` [PATCH 13/19] net: reply to ping requests
` [PATCH 14/19] usbnet: Be more friendly in the receive path
` [PATCH 15/19] net: phy: Also print link down messages
` [PATCH 16/19] net: ifup command: add ethernet device completion
` [PATCH 17/19] net: phy: Do not claim the link is up initially
` [PATCH 18/19] net: Add ifdown support and command
` [PATCH 19/19] poller: Allow to run pollers inside of pollers
[RFC] serial: ns16550: select default pinctrl state
2020-03-13 11:27 UTC (3+ messages)
[PATCH v2 00/16] Protect code from pollers
2020-03-12 10:29 UTC (21+ messages)
` [PATCH 01/16] net: fec_imx: Do not clear MII interrupt during receive
` [PATCH 02/16] miitool: Use mdiobus_read()
` [PATCH 03/16] net: phy: mdio-mux: Use mdiobus_read/write()
` [PATCH 04/16] net: Open ethernet devices explicitly
` [PATCH 05/16] Introduce slices
` [PATCH 06/16] net: Add a slice to struct eth_device
` [PATCH 07/16] net: mdiobus: Add slice
` [PATCH 08/16] usb: Add a slice to usb host controllers
` [PATCH 09/16] usbnet: Add slice
` [PATCH 10/16] net: Call net_poll() in a poller
` [PATCH 11/16] net: reply to ping requests
` [PATCH 12/16] usbnet: Be more friendly in the receive path
` [PATCH 13/16] net: phy: Also print link down messages
` [PATCH 14/16] net: ifup command: add ethernet device completion
` [PATCH 15/16] net: phy: Do not claim the link is up initially
` [PATCH 16/16] net: Add ifdown support and command
[PATCH 0/3] Support for fastboot over UDP
2020-03-12 8:26 UTC (8+ messages)
` [PATCH 2/3] fastboot net: implement "
[PATCH] scripts/bareboximd: add mode argument to open call
2020-03-11 19:42 UTC (3+ messages)
[PATCH 1/5] kbuild: remove unused barebox-head
2020-03-11 15:11 UTC (6+ messages)
` [PATCH 2/5] kbuild: remove dead code for modpost
` [PATCH 3/5] kbuild: rename barebox-pbl-common to BAREBOX_PBL_OBJS
` [PATCH 4/5] kbuild: rename barebox-{common, lds} to BAREBOX_{OBJS, LDS}
` [PATCH 5/5] kbuild: replace barebox-all with BAREBOX_OBJS
[PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset
2020-03-11 15:07 UTC (5+ messages)
` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c
` [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup
` [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support
[PATCH 1/2] ARM: dts: advantech-rom-7421: fix sd-card cd pin
2020-03-11 15:05 UTC (3+ messages)
` [PATCH 2/2] ARM: dts: advantech-rom-7421: Add ocotp node to provide mac address
[PATCH] usb: Add extra delay for device scan
2020-03-11 15:04 UTC (4+ messages)
Protect code from pollers
2020-03-10 10:10 UTC (11+ messages)
` [PATCH 1/8] Introduce slices
` [PATCH 2/8] net: Add a slice to struct eth_device
` [PATCH 3/8] net: mdiobus: Add slice
` [PATCH 4/8] usb: Add a slice to usb host controllers
` [PATCH 5/8] usbnet: Add slice
` [PATCH 6/8] net: Call net_poll() in a poller
` [PATCH 7/8] net: reply to ping requests
` [PATCH 8/8] usbnet: Be more friendly in the receive path
[PATCH 0/2] Documentation: blspec: update documentation
2020-03-09 7:39 UTC (4+ messages)
` [PATCH 1/2] Documentation: blspec: update link to Boot Loader Specification
` [PATCH 2/2] Documentation: blspec: drop documentation of devicetree-overlay
[PATCH v2] of: overlay: rework error message for symbols
2020-03-09 7:38 UTC (2+ messages)
[PATCH 0/2] state: deal gracefully with runtime bucket corruption
2020-03-09 7:36 UTC (2+ messages)
can not compile on ubuntu 18.04 lts for x86
2020-03-09 7:34 UTC (3+ messages)
` 回复: "
[PATCH 1/3] video/ssd1307fb: fix NULL pointer dereference in probe
2020-03-09 7:31 UTC (2+ messages)
[PATCH 1/3] ARM: nitrogen6x: add phy reset timings
2020-03-09 7:28 UTC (6+ messages)
` [PATCH 2/3] net: phy: micrel: backport finding PHY properties
` [PATCH 3/3] ARM: nitrogen6: remove hard coded values
[PATCH 1/2] ARM: at91: add support for SAM9 SoC reset
2020-03-08 21:38 UTC (7+ messages)
` [PATCH 2/2] ARM: at91: add sama5d27-based Groboards Giant Board support
barebox image for an spi flash (like m25p0) on an imx7 soc
2020-03-06 17:22 UTC (14+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox