mail archive of the barebox mailing list
 help / color / mirror / Atom feed
[PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
 2020-08-18  9:34 UTC 

[PATCH] libfile: copy_file: Fix ftruncate called on device files
 2020-08-18  9:20 UTC 

[PATCH] video: ssd1307fb: Honour reset GPIO polarity
 2020-08-18  6:58 UTC 

[PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS
 2020-08-17 11:03 UTC 

[PATCH 1/3] ARM: vexpress: set stdout path
 2020-08-17 10:31 UTC  (5+ messages)
` [PATCH 2/3] ARM: vexpress: allow to select debug UART address
` [PATCH 3/3] ARM: vexpress: enable KALLSYMS in defconfig

[PATCH] fixup! of: base: register DT root as device
 2020-08-17 10:12 UTC 

v2020.08.0
 2020-08-17  9:28 UTC 

[PATCH v4 0/7] prepare Protonic board code for mainline
 2020-08-17  8:19 UTC  (8+ messages)
` [PATCH v4 1/7] of: base: register DT root as device
` [PATCH v4 2/7] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v4 3/7] common: console_common: add of_console_get_by_alias() helper
` [PATCH v4 4/7] of: of_device_get_match_compatible() helper
` [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v4 6/7] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
` [PATCH v4 7/7] ARM: dts: imx6q-prti6q: add pstore/ramoops node

[PATCH v3 0/6] prepare Protonic board code for mainline
 2020-08-17  6:54 UTC  (9+ messages)
` [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper
` [PATCH v3 3/6] of: of_device_get_match_compatible() helper
` [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
` [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node

[PATCH 1/3] video: add simple, transparent, bridge implementation
 2020-08-17  6:38 UTC  (4+ messages)
` [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding
` [PATCH 3/3] video: simple-panel: don't error out on unhandled ioctl command

[PATCH v1] string: add sanity check to the strcmp() and strncmp()
 2020-08-17  6:26 UTC  (2+ messages)

[PATCH] of: base: move memory init from DT to initcall
 2020-08-17  6:06 UTC  (2+ messages)

[PATCH fixup v1] of: base: register DT root as device
 2020-08-17  4:45 UTC  (11+ messages)

barebox:ubi attach time
 2020-08-17  4:12 UTC  (2+ messages)

[PATCH v6] FIT: Parse `load` and `entry` addresses
 2020-08-14 13:22 UTC  (2+ messages)

Some USB memory sticks not (fully) recognized
 2020-08-14 13:21 UTC  (7+ messages)
        ` [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"

[PATCH v4 00/13] usb: dwc2: Add host and gadget driver
 2020-08-14 13:12 UTC  (18+ messages)
` [PATCH v4 01/13] Revert "usb: Add dwc2 host driver"
` [PATCH v4 02/13] usb: dwc2: Add host controller driver
` [PATCH v4 03/13] usb: dwc2: host: Read dr_mode from device tree
` [PATCH v4 04/13] usb: dwc2: Rework roothub interface
` [PATCH v4 05/13] usb: dwc2: Rework timeout
` [PATCH v4 06/13] usb: dwc2: host: Handle dma mapping errors
` [PATCH v4 07/13] usb: dwc2: host: Dynamic fifo size support from Linux
` [PATCH v4 08/13] usb: dwc2: host: Fix toggle reset
` [PATCH v4 09/13] usb: dwc2: host: Rewrite dwc2_hc_init
` [PATCH v4 10/13] usb: dwc2: Add function to flush tx fifo
` [PATCH v4 11/13] usb: dwc2: Add structure for gadget driver
` [PATCH v4 12/13] usb: dwc2: Add "
` [PATCH v4 13/13] usb: dwc2: Use register_otg_device

[PATCH v6 00/20] Slices and fastboot over UDP
 2020-08-13 13:42 UTC  (21+ messages)
` [PATCH 01/20] Introduce slices
` [PATCH 02/20] Add workqueues
` [PATCH 03/20] ratp: Switch to workqueues
` [PATCH 04/20] net: Add a slice to struct eth_device
` [PATCH 05/20] net: mdiobus: Add slice
` [PATCH 06/20] usb: Add a slice to usb host controllers
` [PATCH 07/20] usbnet: Add slice
` [PATCH 08/20] net: Call net_poll() in a poller
` [PATCH 09/20] net: reply to ping requests
` [PATCH 10/20] usbnet: Be more friendly in the receive path
` [PATCH 11/20] globalvar: Add helper for deprecated variable names
` [PATCH 12/20] fastboot: rename usbgadget.fastboot_* variables to fastboot.*
` [PATCH 13/20] fastboot: Warn when cb_download is called with file still open
` [PATCH 14/20] fastboot: Add fastboot_abort()
` [PATCH 15/20] fastboot: init list head in common
` [PATCH 16/20] fastboot net: implement fastboot over UDP
` [PATCH 17/20] usb: fastboot: execute commands in command context
` [PATCH 18/20] Add WARN_ONCE() macro
` [PATCH 19/20] fs: Warn when filesystem operations are called from a poller
` [PATCH 20/20] Documentation: Add document about background execution in barebox

[PATCH v5 00/21] Slices and fastboot over UDP
 2020-08-13 10:38 UTC  (4+ messages)
` [PATCH 17/21] fastboot net: implement "

Enable Display/Splash on Phycore am335x with barebox 2020.01.0
 2020-08-12 12:47 UTC  (3+ messages)

[PATCH v5] FIT: Parse `load` and `entry` addresses
 2020-08-12 12:32 UTC  (6+ messages)

[PATCH] dtc_cpp: allow to pass options per target
 2020-08-12  9:44 UTC  (2+ messages)

[PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
 2020-08-12  9:41 UTC  (5+ messages)
` [PATCH v2 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM/MP
` [PATCH v2 3/4] ARM: nxp-imx8mm-evk: always set up UART
` [PATCH v2 4/4] nvmem: ocotp: add support for i.MX8MM

[PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code
 2020-08-12  9:38 UTC  (2+ messages)

[PATCH v4 0/3] introduce board-driver support
 2020-08-11 14:24 UTC  (3+ messages)
` [PATCH v4 2/3] of: base: register DT root as device

[PATCH] console_countdown: Add CR as valid return key
 2020-08-11 11:24 UTC  (4+ messages)

[PATCH v2 00/13] prepare Protonic board code for mainline
 2020-08-11 11:12 UTC  (18+ messages)
` [PATCH v2 01/13] ARM: dts: imx6q-prti6q: fix PHY register
` [PATCH v2 02/13] ARM: dts: imx6: vicut1: fix network support
` [PATCH v2 03/13] of: base: register DT root as device
` [PATCH v2 04/13] ARM: embest-riotboard: port board file to the driver model
` [PATCH v2 05/13] net: port nvmem_get_mac_address() from linux kernel
` [PATCH v2 06/13] of: of_net: sync of_get_mac_address() with latest kernel version
` [PATCH v2 07/13] net: fec_imx: use of_get_mac_address() to get mac address out of DT
` [PATCH v2 08/13] of: of_device_get_match_compatible() helper
` [PATCH v2 09/13] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v2 10/13] common: console_common: add of_console_get_by_alias() helper
` [PATCH v2 11/13] ARM: protonic-imx6: port Protonic specific board code
` [PATCH v2 12/13] of: add barebox-serial driver
` [PATCH v2 13/13] ARM: dts: imx6q-prti6q: add barebox, serial-number node

[PATCH v3 00/14] usb: dwc2: Add host and gadget driver
 2020-08-11  9:31 UTC  (7+ messages)
` [PATCH v3 02/14] usb: dwc2: Add host controller driver
` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function

[PATCH v1 00/11] prepare Protonic board code for mainline
 2020-08-11  8:27 UTC  (14+ messages)
` [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT
` [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
` [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code
` [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node

[PATCH] arm: baltos: export DIP switch value
 2020-08-11  7:39 UTC  (2+ messages)

[PATCH] kvx: exclude dtb from malloc zone
 2020-08-11  7:34 UTC  (2+ messages)

[PATCH] ARM: boards: phytec-som-imx6: Add mmc and emmc-boot bbu update handler
 2020-08-10 20:00 UTC  (2+ messages)

[PATCH 1/5] clk: imx7: add IMX7D_OCOTP_CLK
 2020-08-10 19:54 UTC  (2+ messages)

[PATCH v2] arm: baltos: add environment node
 2020-08-10 19:48 UTC  (2+ messages)

[PATCH] treewide: remove stale instances of struct device
 2020-08-10 19:30 UTC  (4+ messages)

[PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
 2020-08-10 12:20 UTC 

[PATCH v2] bootm: add global.bootm.root_dev env var for booting via PARTUUID
 2020-08-10 12:14 UTC 

[PATCH] bootm: add global.bootm.root_dev env var for booting via PARTUUID
 2020-08-10 12:08 UTC 

[PATCH 00/11] ramfs: Use dynamically sized chunks
 2020-08-10 11:13 UTC  (4+ messages)
` [PATCH 04/11] fs: free inodes we no longer need

[PATCH 0/3] squashfs: Fix current master
 2020-08-10 11:12 UTC  (4+ messages)
` [PATCH 1/3] fs: squashfs: set s_op in time
` [PATCH 2/3] fs: squashfs: Do not free root inode
` [PATCH 3/3] fs: Use iget_locked() rather than squashfs specific function

[RFC PATCH v2 0/3] Introduce global.bootm.root_dev env var for booting via PARTUUID
 2020-08-10  9:45 UTC  (6+ messages)
` [RFC PATCH v2 1/3] bootm: add env var root_dev
` [RFC PATCH v2 2/3] globalvar: add bootm.root_dev
` [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev

[PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board
 2020-08-10  9:33 UTC  (7+ messages)
` [PATCH v2 1/2] mci: imx-esdhc-pbl: Add support for IMX7
` [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board

[PATCH 1/3] ARM: i.MX6 dtsi: add enet_out clock
 2020-08-10  8:38 UTC  (5+ messages)
` [PATCH 2/3] ARM: imx6ul: add fec bits to GPR syscon definition
` [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d

Getting serial console output on new imx7d tqma7 board UART4
 2020-08-10  8:00 UTC  (18+ messages)

[PATCH] spi: add coredevice_spi_driver macro as well
 2020-08-10  6:38 UTC  (2+ messages)

[PATCH] image: Convert the IH_... values to enums
 2020-08-10  6:36 UTC  (3+ messages)
` [PATCH] riscv: Makefile: make it possible to use riscv64 compiler

[PATCH 0/2] ARM: i.MX: Add support for IMX7 based board
 2020-08-03 22:28 UTC  (4+ messages)
` [PATCH 1/2] mci: imx-esdhc-pbl: Add support for IMX7
` [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board

page:  |  | latest

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox