AW: i.MX6ul USB serial downloader and Barebox

[Patrick Schneider <patrick.schneider@bhtronik.de>]

Hi Sascha,

$ otg.mode=host

Did the trick for me. Now I can flash the nand from usb-stick data on /dev/disk0.0
Works like a charm, thanks!

Regards,
Patrick 

> > Hi Sascha,
> > thanks for the reply.
> > It seems that I am lacking something in the usb configuration. I am always
> getting:
> >
> > couldn't find an available UDC
> > usbgadget: No such device
> 
> I don't know which hardware you are on, but you may have to enable the
> USB controller in the device tree. If otg mode is configured there you also
> have to do a "otg.mode=peripheral" to turn the controller into gadget mode.
> 
> >
> > $ fastboot devices -l
> >
> > Delivers nothing on my windows host side.
> > Before I proceed, wouldn't it be also possible to just plug a usb-stick and
> copy rootfs and barebox.bin from there?
> > Unfortunately
> >
> > $ usb
> >
> > Also doesn't recognize my plugged in usb-stick.
> > The USB port functions normally under linux itself.
> 
> If that's the same port as you do fastboot on then you might have to do a
> "otg.mode=host" to turn the controller into host mode.
> 
> Sascha
> 
> 
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox