From: Belisko Marek <marek.belisko@gmail.com>
To: barebox@lists.infradead.org
Subject: booting pandaboard rev A2 problems
Date: Fri, 17 Jun 2011 21:26:46 +0200 [thread overview]
Message-ID: <BANLkTi=DFpLyEQwe62KSjYUn+pGPxPe1CQ@mail.gmail.com> (raw)
Hi,
I'm trying to boot barebox on Panda rev. A2.
I make panda_xload_defconfig compile and put to FAT SD card partition
ranamed barebox.bin to u-boot.bin (MLO reads u-boot.bin by default).
Barebox start but after printing revision number is stuck. I add some
printks and
seems it hang in omap_hsmmc_probe funtion after mci_register(&hsmmc->mci) call.
I try with 2 SD cards and non of them is working.
Also try to load to flash partition only barebox.bin.itf + barebox.bin
but this setup also
doesn't work. AFAIU itf add some data before barebox to be possible to
boot directly without
x-loader. When run_shell is called barebox.bin should be copied do
DDRAM and run.
Any ideas what should I check.
Thanks in advance,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2011-06-17 19:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-17 19:26 Belisko Marek [this message]
2011-06-20 6:33 ` Antwort: " Jan Weitzel
2011-06-20 7:04 ` Sascha Hauer
2011-06-20 17:59 ` Belisko Marek
2011-06-20 11:38 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTi=DFpLyEQwe62KSjYUn+pGPxPe1CQ@mail.gmail.com' \
--to=marek.belisko@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox