Hello,

I set my outgoing my in gmail to be UTF-8, is the message plain text now?  I
can't tell the difference on my side.

Ok so i figured out that one of my problems was that I was using the
"devfs_add_partition"
call wrong. The second parameter is an offset not the base address ... oops.
Now I can see env0 under devices.

It's still not able to load it but the error I'm getting is "envfs: wrong
magic on /dev/env0". I think this is just a matter of this section being
empty. Thanks for the help guys, I can probably figure it out from here.

One last question though, does this section have to be populated manually?
Do i have to explicitly load a env.bin file to my device and then copy it to
the env0 partition? Is there a way to have this loaded onto my main
bootloader .bin file when it gets compiled?

Thanks,
Marko

On Tue, Apr 12, 2011 at 9:01 PM, Jean-Christophe PLAGNIOL-VILLARD <
plagnioj@jcrosoft.com> wrote:

> Hi,
>
>        could you send your board patch and the log of your console
>        so we can help you more
>
>        btw please do not post in HTML
>
> Best Regards,
> J.
> On 12:42 Tue 12 Apr     , Marko Milutinovic wrote:
> >    Hello,
> >    1. I don't think that I took any steps to save the environment. Not
> sure
> >    how to go about doing that. I have the 'env\bin\init' file under my
> board
> >    directory. I was under the impressions this would get built in
> >    automatically. Additionally in my init.c file for my board I have the
> >    following lines:
> >    devfs_add_partition("nor0", 0x01000000, 0x10000, PARTITION_FIXED,
> >    "self_raw");
> >    devfs_add_partition("nor0", 0x01010000, 0x1000, PARTITION_FIXED,
> "env0");
> >    2. When my board boots i get the following output lines
> >    Malloc space: .(rest of text ...)
> >    Stack space: (rest of text ...)
> >    Open /dev/env0 error2
> >    running /env/bin/init...
> >    not found
> >    barebox:
> >    Thanks
> >    Marko
> >
> >    On Mon, Apr 11, 2011 at 10:25 PM, Baruch Siach <baruch@tkos.co.il>
> wrote:
> >
> >      Hi Marko,
> >      On Mon, Apr 11, 2011 at 09:18:53PM -0600, Marko Milutinovic wrote:
> >      > I have barebox working almost fully on my board, except I can't
> get
> >      the
> >      > environment to load ... I have an env0 partition allocated and
> under
> >      my
> >      > board I have the /env/bin/init file. Anyone have any tips as to
> what I
> >      am
> >      > missing or can they point me to another resource?
> >
> >      More info is needed:
> >
> >      1. What did you do to save the environment?
> >
> >      2. What is your indication that the environment doesn't "load"?
> >
> >      baruch
> >      --
> >                                                          ~. .~   Tk Open
> >      Systems
> >
>  =}------------------------------------------------ooO--U--Ooo------------{=
> >        - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il-
>
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
>
>