Hello,

1. I don't think that I took any steps to save the environment. Not sure how to go about doing that. I have the 'env\bin\init' file under my board directory. I was under the impressions this would get built in automatically. Additionally in my init.c file for my board I have the following lines:

devfs_add_partition("nor0", 0x01000000, 0x10000, PARTITION_FIXED, "self_raw");
devfs_add_partition("nor0", 0x01010000, 0x1000, PARTITION_FIXED, "env0");

2. When my board boots i get the following output lines

Malloc space: .(rest of text ...)
Stack space: (rest of text ...)
Open /dev/env0 error2 
running /env/bin/init...
not found
barebox:

Thanks
Marko


On Mon, Apr 11, 2011 at 10:25 PM, Baruch Siach <baruch@tkos.co.il> wrote:
Hi Marko,

On Mon, Apr 11, 2011 at 09:18:53PM -0600, Marko Milutinovic wrote:
> I have barebox working almost fully on my board, except I can't get the
> environment to load ... I have an env0 partition allocated and under my
> board I have the /env/bin/init file. Anyone have any tips as to what I am
> missing or can they point me to another resource?

More info is needed:

1. What did you do to save the environment?

2. What is your indication that the environment doesn't "load"?

baruch

--
                                                    ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
  - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -