That works great!

Thanks for all the help.
Marko

On Tue, Apr 12, 2011 at 10:09 PM, Baruch Siach <baruch@tkos.co.il> wrote:

> Hi Marko,
>
> On Tue, Apr 12, 2011 at 09:42:47PM -0600, Marko Milutinovic wrote:
> > One last question though, does this section have to be populated
> manually?
> > Do i have to explicitly load a env.bin file to my device and then copy it
> to
> > the env0 partition? Is there a way to have this loaded onto my main
> > bootloader .bin file when it gets compiled?
>
> If you set CONFIG_DEFAULT_ENVIRONMENT and CONFIG_DEFAULT_ENVIRONMENT_PATH
> in
> your .config, then you have a default environment compiled into your
> Barebox
> image. Then, to save this default environment into your flash just run
> 'saveenv'.
>
> baruch
>
> > On Tue, Apr 12, 2011 at 9:01 PM, Jean-Christophe PLAGNIOL-VILLARD <
> > plagnioj@jcrosoft.com> wrote:
> >
> > > Hi,
> > >
> > >        could you send your board patch and the log of your console
> > >        so we can help you more
> > >
> > >        btw please do not post in HTML
> > >
> > > Best Regards,
> > > J.
> > > On 12:42 Tue 12 Apr     , Marko Milutinovic wrote:
> > > >    Hello,
> > > >    1. I don't think that I took any steps to save the environment.
> Not
> > > sure
> > > >    how to go about doing that. I have the 'env\bin\init' file under
> my
> > > board
> > > >    directory. I was under the impressions this would get built in
> > > >    automatically. Additionally in my init.c file for my board I have
> the
> > > >    following lines:
> > > >    devfs_add_partition("nor0", 0x01000000, 0x10000, PARTITION_FIXED,
> > > >    "self_raw");
> > > >    devfs_add_partition("nor0", 0x01010000, 0x1000, PARTITION_FIXED,
> > > "env0");
> > > >    2. When my board boots i get the following output lines
> > > >    Malloc space: .(rest of text ...)
> > > >    Stack space: (rest of text ...)
> > > >    Open /dev/env0 error2
> > > >    running /env/bin/init...
> > > >    not found
> > > >    barebox:
> > > >    Thanks
> > > >    Marko
> > > >
> > > >    On Mon, Apr 11, 2011 at 10:25 PM, Baruch Siach <baruch@tkos.co.il
> >
> > > wrote:
> > > >
> > > >      Hi Marko,
> > > >      On Mon, Apr 11, 2011 at 09:18:53PM -0600, Marko Milutinovic
> wrote:
> > > >      > I have barebox working almost fully on my board, except I
> can't
> > > get
> > > >      the
> > > >      > environment to load ... I have an env0 partition allocated and
> > > under
> > > >      my
> > > >      > board I have the /env/bin/init file. Anyone have any tips as
> to
> > > what I
> > > >      am
> > > >      > missing or can they point me to another resource?
> > > >
> > > >      More info is needed:
> > > >
> > > >      1. What did you do to save the environment?
> > > >
> > > >      2. What is your indication that the environment doesn't "load"?
> > > >
> > > >      baruch
> > > >      --
>
> --
>                                                     ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>   - baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
>