* [PATCH 1/2] ARM: add LS1021A to Layerscape machine support
@ 2023-03-13 14:43 Renaud Barbier
0 siblings, 0 replies; only message in thread
From: Renaud Barbier @ 2023-03-13 14:43 UTC (permalink / raw)
To: Barebox List
This updates the Layerscape support in preparation for the
introduction of the LS1021A-IOT:
- Makefile/Kconfig
- LS1021A specific register maps and configurations
- errata workarounds update
Signed-off-by: Renaud Barbier <renaud.barbier@ametek.com>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/ls1046ardb/lowlevel.c | 2 +-
arch/arm/boards/tqmls1046a/board.c | 2 +-
arch/arm/boards/tqmls1046a/lowlevel.c | 2 +-
arch/arm/mach-layerscape/Kconfig | 14 +
arch/arm/mach-layerscape/Makefile | 9 +-
arch/arm/mach-layerscape/boot.c | 11 +-
arch/arm/mach-layerscape/errata.c | 76 +++-
.../mach-layerscape/include/mach/debug_ll.h | 5 +-
.../arm/mach-layerscape/include/mach/errata.h | 2 +
.../mach-layerscape/include/mach/fsl_epu.h | 67 +++
.../mach-layerscape/include/mach/layerscape.h | 7 +-
.../mach-layerscape/include/mach/lowlevel.h | 1 +
arch/arm/mach-layerscape/include/mach/xload.h | 4 +
arch/arm/mach-layerscape/lowlevel-ls102xa.c | 389 ++++++++++++++++++
arch/arm/mach-layerscape/ls102xa_stream_id.c | 55 +++
arch/arm/mach-layerscape/restart.c | 30 ++
arch/arm/mach-layerscape/xload-qspi.c | 43 +-
arch/arm/mach-layerscape/xload.c | 20 +-
images/Makefile.layerscape | 9 +
include/soc/fsl/immap_lsch2.h | 171 +++++++-
21 files changed, 883 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/mach-layerscape/include/mach/fsl_epu.h
create mode 100644 arch/arm/mach-layerscape/lowlevel-ls102xa.c
create mode 100644 arch/arm/mach-layerscape/ls102xa_stream_id.c
create mode 100644 arch/arm/mach-layerscape/restart.c
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 671f07c7bc..8fb8743768 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -194,6 +194,7 @@ obj-$(CONFIG_MACH_ZII_IMX7D_DEV) += zii-imx7d-dev/
obj-$(CONFIG_MACH_WAGO_PFC_AM35XX) += wago-pfc-am35xx/
obj-$(CONFIG_MACH_LS1046ARDB) += ls1046ardb/
obj-$(CONFIG_MACH_TQMLS1046A) += tqmls1046a/
+obj-$(CONFIG_MACH_LS1021AIOT) += ls1021aiot/
obj-$(CONFIG_MACH_MNT_REFORM) += mnt-reform/
obj-$(CONFIG_MACH_SKOV_ARM9CPU) += skov-arm9cpu/
obj-$(CONFIG_MACH_RK3568_EVB) += rockchip-rk3568-evb/
diff --git a/arch/arm/boards/ls1046ardb/lowlevel.c b/arch/arm/boards/ls1046ardb/lowlevel.c
index 9eae032377..074a070a4d 100644
--- a/arch/arm/boards/ls1046ardb/lowlevel.c
+++ b/arch/arm/boards/ls1046ardb/lowlevel.c
@@ -186,7 +186,7 @@ static struct fsl_ddr_info ls1046a_info = {
static noinline __noreturn void ls1046ardb_r_entry(unsigned long memsize)
{
- unsigned long membase = LS1046A_DDR_SDRAM_BASE;
+ unsigned long membase = LAYERSCAPE_DDR_SDRAM_BASE;
struct pbl_i2c *i2c;
int ret;
diff --git a/arch/arm/boards/tqmls1046a/board.c b/arch/arm/boards/tqmls1046a/board.c
index 028be890e0..08684239e5 100644
--- a/arch/arm/boards/tqmls1046a/board.c
+++ b/arch/arm/boards/tqmls1046a/board.c
@@ -47,7 +47,7 @@ static int tqmls1046a_postcore_init(void)
/* divide CGA1/CGA2 PLL by 24 to get QSPI interface clock */
out_be32(&scfg->qspi_cfg, 0x30100000);
- bootsource = ls1046_bootsource_get();
+ bootsource = layerscape_bootsource_get();
switch (bootsource) {
case BOOTSOURCE_MMC:
diff --git a/arch/arm/boards/tqmls1046a/lowlevel.c b/arch/arm/boards/tqmls1046a/lowlevel.c
index 99dcf1eff7..40e505fbaf 100644
--- a/arch/arm/boards/tqmls1046a/lowlevel.c
+++ b/arch/arm/boards/tqmls1046a/lowlevel.c
@@ -95,7 +95,7 @@ extern char __dtb_fsl_tqmls1046a_mbls10xxa_start[];
static noinline __noreturn void tqmls1046a_r_entry(void)
{
- unsigned long membase = LS1046A_DDR_SDRAM_BASE;
+ unsigned long membase = LAYERSCAPE_DDR_SDRAM_BASE;
if (get_pc() >= membase)
barebox_arm_entry(membase, 0x80000000 - SZ_64M,
diff --git a/arch/arm/mach-layerscape/Kconfig b/arch/arm/mach-layerscape/Kconfig
index 943a474808..670a7b38c1 100644
--- a/arch/arm/mach-layerscape/Kconfig
+++ b/arch/arm/mach-layerscape/Kconfig
@@ -2,6 +2,10 @@
if ARCH_LAYERSCAPE
+config ARCH_TEXT_BASE
+ hex
+ default 0x40000000 if MACH_LS1021AIOT
+
config ARCH_LAYERSCAPE_PPA
bool "Include PPA firmware"
select ARM_PSCI_OF
@@ -36,4 +40,14 @@ config MACH_TQMLS1046A
select DDR_FSL
select DDR_FSL_DDR4
+config ARCH_LS1021
+ select CPU_V7
+ bool
+
+config MACH_LS1021AIOT
+ bool "LS1021AIOT Board"
+ select ARCH_LS1021
+ select DDR_FSL
+ select DDR_FSL_DDR3
+
endif
diff --git a/arch/arm/mach-layerscape/Makefile b/arch/arm/mach-layerscape/Makefile
index 58d3ea820a..ed55867390 100644
--- a/arch/arm/mach-layerscape/Makefile
+++ b/arch/arm/mach-layerscape/Makefile
@@ -1,10 +1,13 @@
# SPDX-License-Identifier: GPL-2.0-only
obj- := __dummy__.o
-lwl-y += lowlevel.o errata.o
-lwl-$(CONFIG_ARCH_LS1046) += lowlevel-ls1046a.o
-obj-y += icid.o
+lwl-y += errata.o
+lwl-$(CONFIG_ARCH_LS1046) += lowlevel.o lowlevel-ls1046a.o
+obj-$(CONFIG_ARCH_LS1046) += icid.o
obj-pbl-y += boot.o
pbl-y += xload-qspi.o xload.o
obj-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa.o ppa-entry.o
obj-$(CONFIG_BOOTM) += pblimage.o
+
+lwl-$(CONFIG_ARCH_LS1021) += lowlevel-ls102xa.o
+obj-$(CONFIG_ARCH_LS1021) += restart.o ls102xa_stream_id.o
diff --git a/arch/arm/mach-layerscape/boot.c b/arch/arm/mach-layerscape/boot.c
index c6f816444a..12b5608a5b 100644
--- a/arch/arm/mach-layerscape/boot.c
+++ b/arch/arm/mach-layerscape/boot.c
@@ -6,7 +6,7 @@
#include <mach/layerscape.h>
#include <soc/fsl/immap_lsch2.h>
-enum bootsource ls1046_bootsource_get(void)
+enum bootsource layerscape_bootsource_get(void)
{
void __iomem *dcfg = IOMEM(LSCH2_DCFG_ADDR);
uint32_t rcw_src;
@@ -27,13 +27,14 @@ enum bootsource ls1046_bootsource_get(void)
return BOOTSOURCE_UNKNOWN;
}
-static int ls1046a_bootsource_init(void)
+static int layerscape_bootsource_init(void)
{
- if (!of_machine_is_compatible("fsl,ls1046a"))
+ if (!of_machine_is_compatible("fsl,ls1046a") &&
+ !of_machine_is_compatible("fsl,ls1021a"))
return 0;
- bootsource_set_raw(ls1046_bootsource_get(), BOOTSOURCE_INSTANCE_UNKNOWN);
+ bootsource_set_raw(layerscape_bootsource_get(), BOOTSOURCE_INSTANCE_UNKNOWN);
return 0;
}
-coredevice_initcall(ls1046a_bootsource_init);
+coredevice_initcall(layerscape_bootsource_init);
diff --git a/arch/arm/mach-layerscape/errata.c b/arch/arm/mach-layerscape/errata.c
index 4f4b759ddb..7571d39eaf 100644
--- a/arch/arm/mach-layerscape/errata.c
+++ b/arch/arm/mach-layerscape/errata.c
@@ -17,11 +17,17 @@ static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset)
SCFG_USB_PCSTXSWINGFULL << 9);
}
-static void erratum_a008997_ls1046a(void)
+static void erratum_a008997_layerscape(void)
{
u32 __iomem *scfg = (u32 __iomem *)LSCH2_SCFG_ADDR;
set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1);
+}
+
+static void erratum_a008997_ls1046a(void)
+{
+ u32 __iomem *scfg = (u32 __iomem *)LSCH2_SCFG_ADDR;
+
set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2);
set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3);
}
@@ -32,6 +38,14 @@ static void erratum_a008997_ls1046a(void)
out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \
out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
+static void erratum_a009007_layerscape(void)
+{
+ void __iomem *usb_phy = IOMEM(SCFG_USB_PHY1);
+
+ usb_phy = (void __iomem *)SCFG_USB_PHY3;
+ PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+}
+
static void erratum_a009007_ls1046a(void)
{
void __iomem *usb_phy = IOMEM(SCFG_USB_PHY1);
@@ -39,9 +53,6 @@ static void erratum_a009007_ls1046a(void)
PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
usb_phy = (void __iomem *)SCFG_USB_PHY2;
PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
-
- usb_phy = (void __iomem *)SCFG_USB_PHY3;
- PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
}
static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset)
@@ -49,25 +60,44 @@ static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset)
scfg_clrsetbits32(scfg + offset / 4, 0xf << 6, SCFG_USB_TXVREFTUNE << 6);
}
-static void erratum_a009008_ls1046a(void)
+static void erratum_a009008_layerscape(void)
{
u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR);
set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1);
+}
+
+static void erratum_a009008_ls1046a(void)
+{
+ u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR);
+
set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2);
set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3);
}
+static void erratum_a009008_ls1021a(void)
+{
+ u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR);
+
+ set_usb_txvreftune(scfg, SCFG_USB3PRM2CR_USB1);
+}
+
static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset)
{
scfg_clrbits32(scfg + offset / 4, SCFG_USB_SQRXTUNE_MASK << 23);
}
-static void erratum_a009798_ls1046a(void)
+static void erratum_a009798_layerscape(void)
{
u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR);
set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1);
+}
+
+static void erratum_a009798_ls1046a(void)
+{
+ u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR);
+
set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2);
set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3);
}
@@ -79,8 +109,10 @@ static void erratum_a008850_early(void)
struct ccsr_ddr __iomem *ddr = IOMEM(LSCH2_DDR_ADDR);
/* Skip if running at lower exception level */
- if (current_el() < 3)
- return;
+#if __LINUX_ARM_ARCH__ > 7
+ if (current_el() < 3)
+ return;
+#endif
/* disables propagation of barrier transactions to DDRC from CCI400 */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
@@ -89,17 +121,30 @@ static void erratum_a008850_early(void)
ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
}
-/* erratum_a009942_check_cpo */
+static void layerscape_errata(void)
+{
+ erratum_a008850_early();
+ erratum_a009008_layerscape();
+ erratum_a009798_layerscape();
+ erratum_a008997_layerscape();
+ erratum_a009007_layerscape();
+}
void ls1046a_errata(void)
{
- erratum_a008850_early();
+ layerscape_errata();
erratum_a009008_ls1046a();
erratum_a009798_ls1046a();
erratum_a008997_ls1046a();
erratum_a009007_ls1046a();
}
+void ls1021a_errata(void)
+{
+ layerscape_errata();
+ erratum_a009008_ls1021a();
+}
+
static void erratum_a008850_post(void)
{
/* part 2 of 2 */
@@ -108,8 +153,10 @@ static void erratum_a008850_post(void)
u32 tmp;
/* Skip if running at lower exception level */
- if (current_el() < 3)
- return;
+#if __LINUX_ARM_ARCH__ > 7
+ if (current_el() < 3)
+ return;
+#endif
/* enable propagation of barrier transactions to DDRC from CCI400 */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
@@ -193,3 +240,8 @@ void ls1046a_errata_post_ddr(void)
erratum_a008850_post();
erratum_a009942_check_cpo();
}
+
+void ls1021a_errata_post_ddr(void)
+{
+ erratum_a008850_post();
+}
diff --git a/arch/arm/mach-layerscape/include/mach/debug_ll.h b/arch/arm/mach-layerscape/include/mach/debug_ll.h
index b6630af143..0e05347961 100644
--- a/arch/arm/mach-layerscape/include/mach/debug_ll.h
+++ b/arch/arm/mach-layerscape/include/mach/debug_ll.h
@@ -28,8 +28,11 @@ static inline void debug_ll_write_reg(int reg, uint8_t val)
static inline void debug_ll_init(void)
{
uint16_t divisor;
+ u32 freq = 300000000;
- divisor = debug_ll_ns16550_calc_divisor(300000000);
+ if (IS_ENABLED(CONFIG_ARCH_LS1021))
+ freq = 150000000;
+ divisor = debug_ll_ns16550_calc_divisor(freq);
debug_ll_ns16550_init(divisor);
}
diff --git a/arch/arm/mach-layerscape/include/mach/errata.h b/arch/arm/mach-layerscape/include/mach/errata.h
index 1ec75b5d8d..4755031717 100644
--- a/arch/arm/mach-layerscape/include/mach/errata.h
+++ b/arch/arm/mach-layerscape/include/mach/errata.h
@@ -4,6 +4,8 @@
#define __MACH_ERRATA_H
void ls1046a_errata(void);
+void ls1021a_errata(void);
void ls1046a_errata_post_ddr(void);
+void ls1021a_errata_post_ddr(void);
#endif /* __MACH_ERRATA_H */
diff --git a/arch/arm/mach-layerscape/include/mach/fsl_epu.h b/arch/arm/mach-layerscape/include/mach/fsl_epu.h
new file mode 100644
index 0000000000..523c73d990
--- /dev/null
+++ b/arch/arm/mach-layerscape/include/mach/fsl_epu.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_EPU_H
+#define __FSL_EPU_H
+
+#include <asm/types.h>
+
+#define FSL_STRIDE_4B 4
+#define FSL_STRIDE_8B 8
+
+/* Block offsets */
+#define EPU_BLOCK_OFFSET 0x00000000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR 0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0 0x050
+#define EPEVTCR9 0x074
+#define EPEVTCR_STRIDE FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR 0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0 0x100
+#define EPIMCR31 0x17C
+#define EPIMCR_STRIDE FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0 0x200
+#define EPSMCR15 0x278
+#define EPSMCR_STRIDE FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0 0x300
+#define EPECR15 0x33C
+#define EPECR_STRIDE FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0 0x400
+#define EPACR15 0x43C
+#define EPACR_STRIDE FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0 0x800
+#define EPCCR15 0x83C
+#define EPCCR31 0x87C
+#define EPCCR_STRIDE FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0 0x900
+#define EPCMPR15 0x93C
+#define EPCMPR31 0x97C
+#define EPCMPR_STRIDE FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0 0xA00
+#define EPCTR31 0xA7C
+#define EPCTR_STRIDE FSL_STRIDE_4B
+
+#define FSM_END_FLAG 0xFFFFFFFFUL
+
+#endif
diff --git a/arch/arm/mach-layerscape/include/mach/layerscape.h b/arch/arm/mach-layerscape/include/mach/layerscape.h
index 447417a266..fd7a24c505 100644
--- a/arch/arm/mach-layerscape/include/mach/layerscape.h
+++ b/arch/arm/mach-layerscape/include/mach/layerscape.h
@@ -3,10 +3,11 @@
#ifndef __MACH_LAYERSCAPE_H
#define __MACH_LAYERSCAPE_H
-#define LS1046A_DDR_SDRAM_BASE 0x80000000
-#define LS1046A_DDR_FREQ 2100000000
+#define LAYERSCAPE_DDR_SDRAM_BASE 0x80000000
+#define LS1046A_DDR_FREQ 2100000000
+#define LS1021A_DDR_FREQ 1600000000
-enum bootsource ls1046_bootsource_get(void);
+enum bootsource layerscape_bootsource_get(void);
#ifdef CONFIG_ARCH_LAYERSCAPE_PPA
int ls1046a_ppa_init(resource_size_t ppa_start, resource_size_t ppa_size);
diff --git a/arch/arm/mach-layerscape/include/mach/lowlevel.h b/arch/arm/mach-layerscape/include/mach/lowlevel.h
index 0c077d064b..d013c5e610 100644
--- a/arch/arm/mach-layerscape/include/mach/lowlevel.h
+++ b/arch/arm/mach-layerscape/include/mach/lowlevel.h
@@ -5,5 +5,6 @@
void ls1046a_init_lowlevel(void);
void ls1046a_init_l2_latency(void);
+void ls102xa_init_lowlevel(void);
#endif /* __MACH_LOWLEVEL_H */
diff --git a/arch/arm/mach-layerscape/include/mach/xload.h b/arch/arm/mach-layerscape/include/mach/xload.h
index 0731681b43..e13c7368b0 100644
--- a/arch/arm/mach-layerscape/include/mach/xload.h
+++ b/arch/arm/mach-layerscape/include/mach/xload.h
@@ -6,7 +6,11 @@
int ls1046a_esdhc_start_image(unsigned long r0, unsigned long r1, unsigned long r2);
int ls1046a_qspi_start_image(unsigned long r0, unsigned long r1,
unsigned long r2);
+int ls1021a_qspi_start_image(unsigned long r0, unsigned long r1,
+ unsigned long r2);
int ls1046a_xload_start_image(unsigned long r0, unsigned long r1,
unsigned long r2);
+int ls1021a_xload_start_image(unsigned long r0, unsigned long r1,
+ unsigned long r2);
#endif /* __MACH_XLOAD_H */
diff --git a/arch/arm/mach-layerscape/lowlevel-ls102xa.c b/arch/arm/mach-layerscape/lowlevel-ls102xa.c
new file mode 100644
index 0000000000..6546186ee5
--- /dev/null
+++ b/arch/arm/mach-layerscape/lowlevel-ls102xa.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Derived from Freescale LSDK-19.09-update-311219
+ */
+#include <common.h>
+#include <io.h>
+#include <clock.h>
+#include <asm/syscounter.h>
+#include <asm/system.h>
+#include <mach/errata.h>
+#include <mach/lowlevel.h>
+#include <mach/fsl_epu.h>
+#include <soc/fsl/immap_lsch2.h>
+#include <soc/fsl/fsl_immap.h>
+
+void udelay(unsigned long usecs)
+{
+ arm_architected_timer_udelay(usecs);
+}
+
+void mdelay(unsigned long msecs)
+{
+ udelay(1000 * msecs);
+}
+
+enum csu_cslx_access {
+ CSU_NS_SUP_R = 0x08,
+ CSU_NS_SUP_W = 0x80,
+ CSU_NS_SUP_RW = 0x88,
+ CSU_NS_USER_R = 0x04,
+ CSU_NS_USER_W = 0x40,
+ CSU_NS_USER_RW = 0x44,
+ CSU_S_SUP_R = 0x02,
+ CSU_S_SUP_W = 0x20,
+ CSU_S_SUP_RW = 0x22,
+ CSU_S_USER_R = 0x01,
+ CSU_S_USER_W = 0x10,
+ CSU_S_USER_RW = 0x11,
+ CSU_ALL_RW = 0xff,
+};
+
+struct csu_ns_dev {
+ unsigned long ind;
+ uint32_t val;
+};
+
+enum csu_cslx_ind {
+ CSU_CSLX_PCIE2_IO = 0,
+ CSU_CSLX_PCIE1_IO,
+ CSU_CSLX_MG2TPR_IP,
+ CSU_CSLX_IFC_MEM,
+ CSU_CSLX_OCRAM,
+ CSU_CSLX_GIC,
+ CSU_CSLX_PCIE1,
+ CSU_CSLX_OCRAM2,
+ CSU_CSLX_QSPI_MEM,
+ CSU_CSLX_PCIE2,
+ CSU_CSLX_SATA,
+ CSU_CSLX_USB3,
+ CSU_CSLX_SERDES = 32,
+ CSU_CSLX_QDMA,
+ CSU_CSLX_LPUART2,
+ CSU_CSLX_LPUART1,
+ CSU_CSLX_LPUART4,
+ CSU_CSLX_LPUART3,
+ CSU_CSLX_LPUART6,
+ CSU_CSLX_LPUART5,
+ CSU_CSLX_DSPI2 = 40,
+ CSU_CSLX_DSPI1,
+ CSU_CSLX_QSPI,
+ CSU_CSLX_ESDHC,
+ CSU_CSLX_2D_ACE,
+ CSU_CSLX_IFC,
+ CSU_CSLX_I2C1,
+ CSU_CSLX_USB2,
+ CSU_CSLX_I2C3,
+ CSU_CSLX_I2C2,
+ CSU_CSLX_DUART2 = 50,
+ CSU_CSLX_DUART1,
+ CSU_CSLX_WDT2,
+ CSU_CSLX_WDT1,
+ CSU_CSLX_EDMA,
+ CSU_CSLX_SYS_CNT,
+ CSU_CSLX_DMA_MUX2,
+ CSU_CSLX_DMA_MUX1,
+ CSU_CSLX_DDR,
+ CSU_CSLX_QUICC,
+ CSU_CSLX_DCFG_CCU_RCPM = 60,
+ CSU_CSLX_SECURE_BOOTROM,
+ CSU_CSLX_SFP,
+ CSU_CSLX_TMU,
+ CSU_CSLX_SECURE_MONITOR,
+ CSU_CSLX_RESERVED0,
+ CSU_CSLX_ETSEC1,
+ CSU_CSLX_SEC5_5,
+ CSU_CSLX_ETSEC3,
+ CSU_CSLX_ETSEC2,
+ CSU_CSLX_GPIO2 = 70,
+ CSU_CSLX_GPIO1,
+ CSU_CSLX_GPIO4,
+ CSU_CSLX_GPIO3,
+ CSU_CSLX_PLATFORM_CONT,
+ CSU_CSLX_CSU,
+ CSU_CSLX_ASRC,
+ CSU_CSLX_SPDIF,
+ CSU_CSLX_FLEXCAN2,
+ CSU_CSLX_FLEXCAN1,
+ CSU_CSLX_FLEXCAN4 = 80,
+ CSU_CSLX_FLEXCAN3,
+ CSU_CSLX_SAI2,
+ CSU_CSLX_SAI1,
+ CSU_CSLX_SAI4,
+ CSU_CSLX_SAI3,
+ CSU_CSLX_FTM2,
+ CSU_CSLX_FTM1,
+ CSU_CSLX_FTM4,
+ CSU_CSLX_FTM3,
+ CSU_CSLX_FTM6 = 90,
+ CSU_CSLX_FTM5,
+ CSU_CSLX_FTM8,
+ CSU_CSLX_FTM7,
+ CSU_CSLX_EPU,
+ CSU_CSLX_COP_DCSR,
+ CSU_CSLX_DDI,
+ CSU_CSLX_GDI,
+ CSU_CSLX_RESERVED1,
+ CSU_CSLX_USB3_PHY = 116,
+ CSU_CSLX_RESERVED2,
+ CSU_CSLX_MAX,
+};
+
+static struct csu_ns_dev ns_dev[] = {
+ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
+ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
+ { CSU_CSLX_IFC_MEM, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM, CSU_ALL_RW },
+ { CSU_CSLX_GIC, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM2, CSU_ALL_RW },
+ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
+ { CSU_CSLX_PCIE2, CSU_ALL_RW },
+ { CSU_CSLX_SATA, CSU_ALL_RW },
+ { CSU_CSLX_USB3, CSU_ALL_RW },
+ { CSU_CSLX_SERDES, CSU_ALL_RW },
+ { CSU_CSLX_QDMA, CSU_ALL_RW },
+ { CSU_CSLX_LPUART2, CSU_ALL_RW },
+ { CSU_CSLX_LPUART1, CSU_ALL_RW },
+ { CSU_CSLX_LPUART4, CSU_ALL_RW },
+ { CSU_CSLX_LPUART3, CSU_ALL_RW },
+ { CSU_CSLX_LPUART6, CSU_ALL_RW },
+ { CSU_CSLX_LPUART5, CSU_ALL_RW },
+ { CSU_CSLX_DSPI2, CSU_ALL_RW },
+ { CSU_CSLX_DSPI1, CSU_ALL_RW },
+ { CSU_CSLX_QSPI, CSU_ALL_RW },
+ { CSU_CSLX_ESDHC, CSU_ALL_RW },
+ { CSU_CSLX_2D_ACE, CSU_ALL_RW },
+ { CSU_CSLX_IFC, CSU_ALL_RW },
+ { CSU_CSLX_I2C1, CSU_ALL_RW },
+ { CSU_CSLX_USB2, CSU_ALL_RW },
+ { CSU_CSLX_I2C3, CSU_ALL_RW },
+ { CSU_CSLX_I2C2, CSU_ALL_RW },
+ { CSU_CSLX_DUART2, CSU_ALL_RW },
+ { CSU_CSLX_DUART1, CSU_ALL_RW },
+ { CSU_CSLX_WDT2, CSU_ALL_RW },
+ { CSU_CSLX_WDT1, CSU_ALL_RW },
+ { CSU_CSLX_EDMA, CSU_ALL_RW },
+ { CSU_CSLX_SYS_CNT, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
+ { CSU_CSLX_DDR, CSU_ALL_RW },
+ { CSU_CSLX_QUICC, CSU_ALL_RW },
+ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
+ { CSU_CSLX_SFP, CSU_ALL_RW },
+ { CSU_CSLX_TMU, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED0, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC1, CSU_ALL_RW },
+ { CSU_CSLX_SEC5_5, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC3, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO1, CSU_ALL_RW },
+ { CSU_CSLX_GPIO4, CSU_ALL_RW },
+ { CSU_CSLX_GPIO3, CSU_ALL_RW },
+ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
+ { CSU_CSLX_CSU, CSU_ALL_RW },
+ { CSU_CSLX_ASRC, CSU_ALL_RW },
+ { CSU_CSLX_SPDIF, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
+ { CSU_CSLX_SAI2, CSU_ALL_RW },
+ { CSU_CSLX_SAI1, CSU_ALL_RW },
+ { CSU_CSLX_SAI4, CSU_ALL_RW },
+ { CSU_CSLX_SAI3, CSU_ALL_RW },
+ { CSU_CSLX_FTM2, CSU_ALL_RW },
+ { CSU_CSLX_FTM1, CSU_ALL_RW },
+ { CSU_CSLX_FTM4, CSU_ALL_RW },
+ { CSU_CSLX_FTM3, CSU_ALL_RW },
+ { CSU_CSLX_FTM6, CSU_ALL_RW },
+ { CSU_CSLX_FTM5, CSU_ALL_RW },
+ { CSU_CSLX_FTM8, CSU_ALL_RW },
+ { CSU_CSLX_FTM7, CSU_ALL_RW },
+ { CSU_CSLX_COP_DCSR, CSU_ALL_RW },
+ { CSU_CSLX_EPU, CSU_ALL_RW },
+ { CSU_CSLX_GDI, CSU_ALL_RW },
+ { CSU_CSLX_DDI, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED1, CSU_ALL_RW },
+ { CSU_CSLX_USB3_PHY, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED2, CSU_ALL_RW },
+};
+
+/* Found in U-boot but not in LS1021ARM.pdf 02/2020 */
+#define DCSR_RCPM2_ADDR 0x20223000
+#define DCSR_RCPM2_CPMFSMCR0 0x400
+#define DCSR_RCPM2_CPMFSMSR0 0x404
+#define DCSR_RCPM2_CPMFSMCR1 0x414
+#define DCSR_RCPM2_CPMFSMSR1 0x418
+#define CPMFSMSR_FSM_STATE_MASK 0x7f
+
+#define DCSR_EPU_ADDR 0x20000000
+
+static void set_devices_ns_access(unsigned long index, u16 val)
+{
+ u32 *base = IOMEM(LSCH2_CSU_ADDR);
+ u32 *reg;
+ uint32_t tmp;
+
+ reg = base + index / 2;
+ tmp = in_be32(reg);
+ if (index % 2 == 0) {
+ tmp &= 0x0000ffff;
+ tmp |= val << 16;
+ } else {
+ tmp &= 0xffff0000;
+ tmp |= val;
+ }
+
+ out_be32(reg, tmp);
+}
+
+static void init_csu(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ns_dev); i++)
+ set_devices_ns_access(ns_dev[i].ind, ns_dev[i].val);
+}
+
+/**
+ * fsl_epu_clean - Clear EPU registers
+ */
+static void fsl_epu_clean(void *epu_base)
+{
+ u32 offset;
+
+ /* follow the exact sequence to clear the registers */
+ /* Clear EPACRn */
+ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPEVTCRn */
+ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPGCR */
+ out_be32(epu_base + EPGCR, 0);
+
+ /* Clear EPSMCRn */
+ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCCRn */
+ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCMPRn */
+ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCTRn */
+ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPIMCRn */
+ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPXTRIGCRn */
+ out_be32(epu_base + EPXTRIGCR, 0);
+
+ /* Clear EPECRn */
+ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+ out_be32(epu_base + offset, 0);
+}
+
+/* ls102xa_init_lowlevel
+ * Based on ls1046 and U-boot ls102xa arch_cpu_init
+ */
+void ls102xa_init_lowlevel(void)
+{
+ struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR);
+ struct ls102xa_ccsr_scfg *scfg = IOMEM(LSCH2_SCFG_ADDR);
+ struct ls102xa_ccsr_gur __iomem *gur = IOMEM(LSCH2_GUTS_ADDR);
+ void *rcpm2_base = IOMEM(DCSR_RCPM2_ADDR);
+ void *epu_base = IOMEM(DCSR_EPU_ADDR);
+ uint32_t state, major, ctrl, freq;
+ uint64_t val;
+
+ init_csu();
+
+ writel(SYS_COUNTER_CTRL_ENABLE, LSCH2_SYS_COUNTER_ADDR);
+ freq = 12500000;
+ asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* Set PL1 Physical Timer Ctrl */
+ ctrl = ARCH_TIMER_CTRL_ENABLE;
+ asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+
+ /* Set PL1 Physical Comp Value */
+ val = TIMER_COMP_VAL;
+ asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
+
+
+ state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR0) &
+ CPMFSMSR_FSM_STATE_MASK;
+ if (state != 0) {
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x80);
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x0);
+ }
+ state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR1) &
+ CPMFSMSR_FSM_STATE_MASK;
+ if (state != 0) {
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x80);
+ out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x0);
+ }
+
+ fsl_epu_clean(epu_base);
+
+ /* Enable all the snoop signal for various masters */
+ out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
+ SCFG_SNPCNFGCR_DBG_RD_WR |
+ SCFG_SNPCNFGCR_EDMA_SNP);
+
+ if (IS_ENABLED(CONFIG_DRIVER_SPI_FSL_QUADSPI))
+ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+
+ /* Configure Little endian for SAI, ASRC and SPDIF */
+ out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
+
+ /*
+ * Enable snoop requests and DVM message requests for
+ * All the slave interfaces.
+ */
+ out_le32(&cci->slave[0].snoop_ctrl,
+ CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+ out_le32(&cci->slave[1].snoop_ctrl,
+ CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+ out_le32(&cci->slave[2].snoop_ctrl,
+ CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+ out_le32(&cci->slave[4].snoop_ctrl,
+ CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+
+ major = in_be32(&gur->svr);
+ if (SVR_MAJ(major) == SOC_MAJOR_VER_1_0) {
+ /*
+ * Set CCI-400 Slave interface S1, S2 Shareable Override
+ * Register All transactions are treated as non-shareable
+ */
+ out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+ out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
+ }
+
+ /*
+ * Memory controller require a register write before being enabled.
+ * Affects: DDR
+ * Register: EDDRTQCFG
+ * Description: Memory controller performance is not optimal with
+ * default internal target queue register values.
+ * Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
+ */
+ out_be32(&scfg->eddrtqcfg, 0x63b20042);
+
+ ls1021a_errata();
+}
diff --git a/arch/arm/mach-layerscape/ls102xa_stream_id.c b/arch/arm/mach-layerscape/ls102xa_stream_id.c
new file mode 100644
index 0000000000..c47c463b48
--- /dev/null
+++ b/arch/arm/mach-layerscape/ls102xa_stream_id.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <soc/fsl/immap_lsch2.h>
+
+struct smmu_stream_id {
+ uint16_t offset;
+ uint16_t stream_id;
+ char dev_name[32];
+};
+
+static struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
+
+static void
+ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
+{
+ void *scfg = (void *)LSCH2_SCFG_ADDR;
+ int i;
+ u32 icid;
+
+ for (i = 0; i < num; i++) {
+ icid = (id[i].stream_id & 0xff) << 24;
+ out_be32((u32 *)(scfg + id[i].offset), icid);
+ }
+}
+
+static int ls102xa_smmu_stream_id_init(void)
+{
+ if (!of_machine_is_compatible("fsl,ls1021a"))
+ return 0;
+
+ ls102xa_config_smmu_stream_id(dev_stream_id, ARRAY_SIZE(dev_stream_id));
+
+ return 0;
+}
+mmu_initcall(ls102xa_smmu_stream_id_init);
diff --git a/arch/arm/mach-layerscape/restart.c b/arch/arm/mach-layerscape/restart.c
new file mode 100644
index 0000000000..e8bd041ebf
--- /dev/null
+++ b/arch/arm/mach-layerscape/restart.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <common.h>
+#include <init.h>
+#include <restart.h>
+#include <asm/io.h>
+#include <soc/fsl/immap_lsch2.h>
+#include <soc/fsl/fsl_immap.h>
+
+static void ls102xa_restart(struct restart_handler *rst)
+{
+ void __iomem *rcr = IOMEM(LSCH2_RST_ADDR);
+
+ /* Set RESET_REQ bit */
+ setbits_be32(rcr, 0x2);
+
+ mdelay(100);
+
+ hang();
+}
+
+static int restart_register_feature(void)
+{
+ if (!of_machine_is_compatible("fsl,ls1021a"))
+ return 0;
+
+ restart_handler_register_fn("soc-reset", ls102xa_restart);
+
+ return 0;
+}
+coredevice_initcall(restart_register_feature);
diff --git a/arch/arm/mach-layerscape/xload-qspi.c b/arch/arm/mach-layerscape/xload-qspi.c
index 192aea64b4..bfc964589e 100644
--- a/arch/arm/mach-layerscape/xload-qspi.c
+++ b/arch/arm/mach-layerscape/xload-qspi.c
@@ -13,18 +13,21 @@
*/
#define BAREBOX_START (128 * 1024)
-int ls1046a_qspi_start_image(unsigned long r0, unsigned long r1,
- unsigned long r2)
+struct layerscape_base_addr {
+ void *qspi_reg_base;
+ void *membase;
+ void *qspi_mem_base;
+};
+
+static int layerscape_qspi_start_image(struct layerscape_base_addr *base,
+ unsigned long r0, unsigned long r1, unsigned long r2)
{
- void *qspi_reg_base = IOMEM(LSCH2_QSPI0_BASE_ADDR);
- void *membase = (void *)LS1046A_DDR_SDRAM_BASE;
- void *qspi_mem_base = IOMEM(0x40000000);
- void (*barebox)(unsigned long, unsigned long, unsigned long) = membase;
+ void (*barebox)(unsigned long, unsigned long, unsigned long) = base->membase;
/* Switch controller into little endian mode */
- out_be32(qspi_reg_base, 0x000f400c);
+ out_be32(base->qspi_reg_base, 0x000f400c);
- memcpy(membase, qspi_mem_base + BAREBOX_START, barebox_image_size);
+ memcpy(base->membase, base->qspi_mem_base + BAREBOX_START, barebox_image_size);
sync_caches_for_execution();
@@ -36,3 +39,27 @@ int ls1046a_qspi_start_image(unsigned long r0, unsigned long r1,
return -EIO;
}
+
+int ls1046a_qspi_start_image(unsigned long r0, unsigned long r1,
+ unsigned long r2)
+{
+ struct layerscape_base_addr base;
+
+ base.qspi_reg_base = IOMEM(LSCH2_QSPI0_BASE_ADDR);
+ base.membase = IOMEM(LAYERSCAPE_DDR_SDRAM_BASE);
+ base.qspi_mem_base = IOMEM(0x40000000);
+
+ return layerscape_qspi_start_image(&base, r0, r1, r2);
+}
+
+int ls1021a_qspi_start_image(unsigned long r0, unsigned long r1,
+ unsigned long r2)
+{
+ struct layerscape_base_addr base;
+
+ base.qspi_reg_base = IOMEM(LSCH2_QSPI0_BASE_ADDR);
+ base.membase = IOMEM(LAYERSCAPE_DDR_SDRAM_BASE);
+ base.qspi_mem_base = IOMEM(0x40000000);
+
+ return layerscape_qspi_start_image(&base, r0, r1, r2);
+}
diff --git a/arch/arm/mach-layerscape/xload.c b/arch/arm/mach-layerscape/xload.c
index 54495d7f97..7898ce5ae8 100644
--- a/arch/arm/mach-layerscape/xload.c
+++ b/arch/arm/mach-layerscape/xload.c
@@ -10,13 +10,31 @@ int ls1046a_xload_start_image(unsigned long r0, unsigned long r1,
{
enum bootsource src;
- src = ls1046_bootsource_get();
+ src = layerscape_bootsource_get();
switch (src) {
case BOOTSOURCE_SPI_NOR:
return ls1046a_qspi_start_image(r0, r1, r2);
+#if defined(CONFIG_MCI_IMX_ESDHC_PBL)
case BOOTSOURCE_MMC:
return ls1046a_esdhc_start_image(r0, r1, r2);
+#endif
+ default:
+ pr_err("Unknown bootsource\n");
+ return -EINVAL;
+ }
+}
+
+int ls1021a_xload_start_image(unsigned long r0, unsigned long r1,
+ unsigned long r2)
+{
+ enum bootsource src;
+
+ src = layerscape_bootsource_get();
+
+ switch (src) {
+ case BOOTSOURCE_SPI_NOR:
+ return ls1021a_qspi_start_image(r0, r1, r2);
default:
pr_err("Unknown bootsource\n");
return -EINVAL;
diff --git a/images/Makefile.layerscape b/images/Makefile.layerscape
index a180c230c7..062e7263b5 100644
--- a/images/Makefile.layerscape
+++ b/images/Makefile.layerscape
@@ -55,3 +55,12 @@ $(obj)/barebox-tqmls1046a-qspi.image: $(obj)/start_tqmls1046a.pblb \
image-$(CONFIG_MACH_TQMLS1046A) += barebox-tqmls1046a-sd.image \
barebox-tqmls1046a-qspi.image
+
+pbl-$(CONFIG_MACH_LS1021AIOT) += start_ls1021aiot.pbl
+
+$(obj)/barebox-ls1021aiot-qspi.image: $(obj)/start_ls1021aiot.pblb \
+ $(board)/ls1021aiot/ls102xa_rcw_sd_qspi.cfg \
+ $(board)/ls1021aiot/ls102xa_pbi.cfg
+ $(call if_changed,lspbl_spi_image)
+
+image-$(CONFIG_MACH_LS1021AIOT) += barebox-ls1021aiot-qspi.image
diff --git a/include/soc/fsl/immap_lsch2.h b/include/soc/fsl/immap_lsch2.h
index 1b74c77908..62e48ae746 100644
--- a/include/soc/fsl/immap_lsch2.h
+++ b/include/soc/fsl/immap_lsch2.h
@@ -6,6 +6,9 @@
#ifndef __ARCH_FSL_LSCH2_IMMAP_H__
#define __ARCH_FSL_LSCH2_IMMAP_H__
+#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
+#define SOC_MAJOR_VER_1_0 0x1
+
#define gur_in32(a) in_be32(a)
#define gur_out32(a, v) out_be32(a, v)
@@ -60,6 +63,10 @@
#define LSCH2_QDMA_BASE_ADDR (LSCH2_IMMR + 0x07380000)
#define LSCH2_EHCI_USB1_ADDR (LSCH2_IMMR + 0x07600000)
+#define TIMER_COMP_VAL 0xffffffffffffffffull
+#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
+
struct ccsr_gur {
u32 porsr1; /* POR status 1 */
#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
@@ -214,7 +221,67 @@ struct ccsr_gur {
u32 dcfg_ccsr_reserved1;
};
-#define SCFG_QSPI_CLKSEL 0x40100000
+/* LS102XA Device Configuration and Pin Control */
+struct ls102xa_ccsr_gur {
+ u32 porsr1; /* POR status 1 */
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u32 gpporcr2;
+ u32 dcfg_fusesr; /* Fuse status register */
+ u8 res_02c[0x70-0x2c];
+ u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+ u32 devdisr5; /* Device disable control 5 */
+ u8 res_084[0x94-0x84];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res_09c[0xa4-0x9c];
+ u32 svr; /* System version */
+ u8 res_0a8[0xb0-0xa8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res_0b8[0xc0-0xb8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res_0c4[0xc8-0xc4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res_0cc[0xd4-0xcc];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res_0d8[0xdc-0xd8];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res_0e0[0xe4-0xe0];
+ u32 brrl; /* Boot release */
+ u8 res_0e8[0x100-0xe8];
+ u32 rcwsr[16]; /* Reset control word status */
+#define RCW_SB_EN_REG_INDEX 7
+#define RCW_SB_EN_MASK 0x00200000
+ u8 res_140[0x200-0x140];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res_210[0x300-0x210];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res_310[0x400-0x310];
+ u32 crstsr;
+ u8 res_404[0x550-0x404];
+ u32 sataliodnr;
+ u8 res_554[0x604-0x554];
+ u32 pamubypenr;
+ u32 dmacr1;
+ u8 res_60c[0x740-0x60c]; /* add more registers when needed */
+ u32 tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ u32 upper;
+ u32 lower;
+ } tp_cluster[1]; /* Core Cluster n Topology Register */
+ u8 res_848[0xe60-0x848];
+ u32 ddrclkdr;
+ u8 res_e60[0xe68-0xe64];
+ u32 ifcclkdr;
+ u8 res_e68[0xe80-0xe6c];
+ u32 sdhcpcr;
+};
+
#define SCFG_USBDRVVBUS_SELCR_USB1 0x00000000
#define SCFG_USBDRVVBUS_SELCR_USB2 0x00000001
#define SCFG_USBDRVVBUS_SELCR_USB3 0x00000002
@@ -238,10 +305,27 @@ struct ccsr_gur {
#define SCFG_USB_PHY2 0x08500000
#define SCFG_USB_PHY3 0x08510000
#define SCFG_USB_PHY_RX_OVRD_IN_HI 0x200c
+#if defined CONFIG_ARCH_LS1046
+#define SCFG_QSPI_CLKSEL 0x40100000
#define USB_PHY_RX_EQ_VAL_1 0x0000
#define USB_PHY_RX_EQ_VAL_2 0x0080
#define USB_PHY_RX_EQ_VAL_3 0x0380
#define USB_PHY_RX_EQ_VAL_4 0x0b80
+#elif defined CONFIG_ARCH_LS1021
+#define SCFG_QSPI_CLKSEL 0x50100000
+#define USB_PHY_RX_EQ_VAL_1 0x0000
+#define USB_PHY_RX_EQ_VAL_2 0x8000
+#define USB_PHY_RX_EQ_VAL_3 0x8004
+#define USB_PHY_RX_EQ_VAL_4 0x800C
+#endif
+
+#define SCFG_ETSECDMAMCR_LE_BD_FR 0x00000c00
+#define SCFG_SNPCNFGCR_SEC_RD_WR 0xc0000000
+#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
+#define SCFG_ETSECCMCR_GE0_CLK125 0x00000000
+#define SCFG_SNPCNFGCR_DBG_RD_WR 0x000c0000
+#define SCFG_SNPCNFGCR_EDMA_SNP 0x00020000
+#define SCFG_ENDIANCR_LE 0x80000000
#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
@@ -353,4 +437,89 @@ struct ccsr_scfg {
u32 pex3msir;
};
+/* LS102XA Supplemental Configuration Unit */
+struct ls102xa_ccsr_scfg {
+ u32 dpslpcr;
+ u32 resv0[2];
+ u32 etsecclkdpslpcr;
+ u32 resv1[5];
+ u32 fuseovrdcr;
+ u32 pixclkcr;
+ u32 resv2[5];
+ u32 spimsicr;
+ u32 resv3[6];
+ u32 pex1pmwrcr;
+ u32 pex1pmrdsr;
+ u32 resv4[3];
+ u32 usb3prm1cr;
+ u32 usb4prm2cr;
+ u32 pex1rdmsgpldlsbsr;
+ u32 pex1rdmsgpldmsbsr;
+ u32 pex2rdmsgpldlsbsr;
+ u32 pex2rdmsgpldmsbsr;
+ u32 pex1rdmmsgrqsr;
+ u32 pex2rdmmsgrqsr;
+ u32 spimsiclrcr;
+ u32 pexmscportsr[2];
+ u32 pex2pmwrcr;
+ u32 resv5[24];
+ u32 mac1_streamid;
+ u32 mac2_streamid;
+ u32 mac3_streamid;
+ u32 pex1_streamid;
+ u32 pex2_streamid;
+ u32 dma_streamid;
+ u32 sata_streamid;
+ u32 usb3_streamid;
+ u32 qe_streamid;
+ u32 sdhc_streamid;
+ u32 adma_streamid;
+ u32 letechsftrstcr;
+ u32 core0_sft_rst;
+ u32 core1_sft_rst;
+ u32 resv6[1];
+ u32 usb_hi_addr;
+ u32 etsecclkadjcr;
+ u32 sai_clk;
+ u32 resv7[1];
+ u32 dcu_streamid;
+ u32 usb2_streamid;
+ u32 ftm_reset;
+ u32 altcbar;
+ u32 qspi_cfg;
+ u32 pmcintecr;
+ u32 pmcintlecr;
+ u32 pmcintsr;
+ u32 qos1;
+ u32 qos2;
+ u32 qos3;
+ u32 cci_cfg;
+ u32 endiancr;
+ u32 etsecdmamcr;
+ u32 usb3prm3cr;
+ u32 resv9[1];
+ u32 debug_streamid;
+ u32 resv10[5];
+ u32 snpcnfgcr;
+ u32 hrstcr;
+ u32 intpcr;
+ u32 resv12[20];
+ u32 scfgrevcr;
+ u32 coresrencr;
+ u32 pex2pmrdsr;
+ u32 eddrtqcfg;
+ u32 ddrc2cr;
+ u32 ddrc3cr;
+ u32 ddrc4cr;
+ u32 ddrgcr;
+ u32 resv13[120];
+ u32 qeioclkcr;
+ u32 etsecmcr;
+ u32 sdhciovserlcr;
+ u32 resv14[61];
+ u32 sparecr[8];
+ u32 resv15[248];
+ u32 core0sftrstsr;
+ u32 clusterpmcr;
+};
#endif /* __ARCH_FSL_LSCH2_IMMAP_H__*/
--
2.27.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-03-13 14:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-13 14:43 [PATCH 1/2] ARM: add LS1021A to Layerscape machine support Renaud Barbier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox