Hello, How could i link barebox and zImage together? Could you please give an example? Regards Īn data de 21 februarie 2012, 23:01, Sascha Hauer a scris: > On Tue, Feb 21, 2012 at 08:38:24PM +0200, George Stefan wrote: > > Hello guys, > > After dd if=barebox.bin of=/dev/sdb bs=512 and dd > if=arch/arm/boot/uImage > > of=/dev/sdb bs=512 seek=768 i am getting > > > > Board: Freescale i.MX53 LOCO registered netconsole as cs1 eth@eth0: got > MAC > > address from EEPROM: 00:04:9F:01:B4:5B mci@mci0: No partition table > found > > Cannot reset the SD/MMC interface Malloc space: 0x7df00000 -> 0x7fefffff > > (size 32 MB) Stack space : 0x7def8000 -> 0x7df00000 (size 32 kB) envfs: > > wrong magic on /dev/env0 no valid environment found on /dev/env0. Using > > default environment running /env/bin/init... Hit any key to stop > autoboot: > > 1 phy0: Link is up - 100/Full T DHCP client bound to address > > 128.224.168.167 TFTP from server 128.224.168.11 ('zImage-loco' -> > '/image') > > > > Wasn't the board suppose to boot from sd card by default? > > > > Also, i have another question. I want to replace > > > > /* call start_barebox with its absolute address */ > > r = (unsigned int)&start_barebox; > > __asm__ __volatile__("mov pc, %0" : : "r"(r)); > > > > &start_barebox with the actual address of the uImage practically to skip > > all the barebox part and > > boot only with the minimal CPU and memory setup. What do you think? > > You can't jump directly into uImages. It would work with a zImage, but > how do you get your zImage from the sd card without the help of the > bootloader? Well, you could link barebox and a zImage together, but then > you'll realize that the internal ROM code is quite slow when reading > data from SD cards (unless there are ways to tweak this, I don't know) > > What are your goals trying this? > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >