From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-it0-x243.google.com ([2607:f8b0:4001:c0b::243]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fLBFX-0002nM-U7 for barebox@lists.infradead.org; Tue, 22 May 2018 17:39:18 +0000 Received: by mail-it0-x243.google.com with SMTP id 70-v6so997940ity.2 for ; Tue, 22 May 2018 10:38:53 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <20180522081637.b2mm4raotn5ggqsb@pengutronix.de> References: <20180522081637.b2mm4raotn5ggqsb@pengutronix.de> From: Pascal Vizeli Date: Tue, 22 May 2018 19:38:52 +0200 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: RaspberryPi 1/2(/3) To: Roland Hieber Cc: barebox@lists.infradead.org With debug modus it works perfect :) Look like the Serial console is not exists (PL011). Is that a problem with changed/updated DTS files? =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.05.22 19:33:41 =~=~=~=~=~=~=~=~=~=~=~= uart-pl011 3f201000.serial: probe failed: No such file or directory bcm2835-gpio 3f200000.gpio: probed gpiochip-1 with base 0 malloc space: 0x1f9fcdc0 -> 0x1fdfcdbf (size 4 MiB) no /dev/disk0.0. using default env environment load /dev/env0: No such file or directory Maybe you have to create the partition. running /env/bin/init... - Hit m for menu or wait for autoboot - bootchooser: Cannot get state 'state' Nothing bootable found on 'bootchooser' Nothing bootable found HassOS boot Menu: 1: Autoboot 2: Boot System 0 3: Boot System 1 4: Shell 2018-05-22 10:16 GMT+02:00 Roland Hieber : > On Mon, May 21, 2018 at 05:51:33PM +0200, Pascal Vizeli wrote: >> Hi, >> >> I try to build a bootable barebox for raspberry with 2018.05.00 and buildroot: >> https://github.com/home-assistant/hassos/tree/dev/buildroot-external >> >> I build the origin rpi_defconfig but I'm was not able to boot the >> 'barebox.bin' and become a output on UART. I can boot the linux kernel >> from rpi loader. If I try the barebox, it will be flash the green >> light and if I disable the LED support, only the red power light is >> seen. >> >> I try also the RPi3 patches and end in same result. >> I follow also this guide: >> https://www.barebox.org/doc/latest/boards/bcm2835.html >> >> Have anyone a idea what will be the problem or what I doing wrong? > > Which version of the RPi firmware are you using? I wrote that section > while using the git tag 1.20171029, maybe they changed something > again... > > What you can try to do is enable "low level debug messages" make > menuconfig under "Debugging", and try to set the log level to something > higher and see if you get any output. I think you also need to set > "System Type" -> "Lowlevel debug UART" to the model you're using. > > - Roland > > -- > Roland Hieber | r.hieber@pengutronix.de | > Pengutronix e.K. | https://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox