Re: RaspberryPi 1/2(/3)

[Pascal Vizeli <pascal.vizeli@syshack.ch>]

It is the normal default DTS from barebox/linux. I output a 'of_dump':
https://hastebin.com/zanogazonu.xml

greets
Pascal

2018-05-22 20:24 GMT+02:00 Oleksij Rempel <linux@rempel-privat.de>:
> Am 22.05.2018 um 19:38 schrieb Pascal Vizeli:
>> With debug modus it works perfect :) Look like the Serial console is
>> not exists (PL011).
>> Is that a problem with changed/updated DTS files?
>>
>> =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.05.22 19:33:41 =~=~=~=~=~=~=~=~=~=~=~=
>> uart-pl011 3f201000.serial: probe failed: No such file or directory
>
> this uart driver would exit in two cases:
> 1. regulator is present, but can't enable it
> 2. no clock is provided.
>
> I assume we have here a second case.
> Is it not define in devicetree?
>
>
>> bcm2835-gpio 3f200000.gpio: probed gpiochip-1 with base 0
>> malloc space: 0x1f9fcdc0 -> 0x1fdfcdbf (size 4 MiB)
>> no /dev/disk0.0. using default env
>> environment load /dev/env0: No such file or directory
>> Maybe you have to create the partition.
>> running /env/bin/init...
>> - Hit m for menu or wait for autoboot -
>> bootchooser: Cannot get state 'state'
>> Nothing bootable found on 'bootchooser'
>> Nothing bootable found
>> HassOS boot Menu:     1: Autoboot     2: Boot System 0     3: Boot
>> System 1     4: Shell
>>
>> 2018-05-22 10:16 GMT+02:00 Roland Hieber <r.hieber@pengutronix.de>:
>>> On Mon, May 21, 2018 at 05:51:33PM +0200, Pascal Vizeli wrote:
>>>> Hi,
>>>>
>>>> I try to build a bootable barebox for raspberry with 2018.05.00 and buildroot:
>>>> https://github.com/home-assistant/hassos/tree/dev/buildroot-external
>>>>
>>>> I build the origin rpi_defconfig but I'm was not able to boot the
>>>> 'barebox.bin' and become a output on UART. I can boot the linux kernel
>>>> from rpi loader. If I try the barebox, it will be flash the green
>>>> light and if I disable the LED support, only the red power light is
>>>> seen.
>>>>
>>>> I try also the RPi3 patches and end in same result.
>>>> I follow also this guide:
>>>> https://www.barebox.org/doc/latest/boards/bcm2835.html
>>>>
>>>> Have anyone a idea what will be the problem or what I doing wrong?
>>>
>>> Which version of the RPi firmware are you using? I wrote that section
>>> while using the git tag 1.20171029, maybe they changed something
>>> again...
>>>
>>> What you can try to do is enable "low level debug messages" make
>>> menuconfig under "Debugging",  and try to set the log level to something
>>> higher and see if you get any output. I think you also need to set
>>> "System Type" -> "Lowlevel debug UART" to the model you're using.
>>>
>>>  - Roland
>>>
>>> --
>>> Roland Hieber                     | r.hieber@pengutronix.de     |
>>> Pengutronix e.K.                  | https://www.pengutronix.de/ |
>>> Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
>>> Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>
>
>
> --
> Regards,
> Oleksij
>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox