mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: ranquet guillaume <ranquet.guillaume@gmail.com>
To: barebox@lists.infradead.org
Subject: Troubles running qemu64 target
Date: Thu, 28 Jun 2018 15:46:20 +0200	[thread overview]
Message-ID: <CAD+NunZeq6S72tt2BKH-PYKTVPjVMyWG4f78uAdxfn0jazV3wA@mail.gmail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 2385 bytes --]

Hello.

I'm pretty new to barebox and I'm having some troubles running the
qemu64 target.
to top it off, I'm also new to the ARM world... and this is my first
attempt at looking at a bootloader...

I'm having trouble porting some hardware to barebox... and while I'm
waiting for a JTAG probe, I though I could have some fun with qemu64
:)

The boot stops pretty early in the flow. way before anything can be
printed on the serial. I have attached gdb to the qemu-system.
The "qemu-system" seems to be stuck when trying to execute an stp with
the stack pointer as the destination.

I'm having the feeling that I have a configuration issue because sp = 0x0

x27            0x0      0
x28            0x0      0
x29            0x0      0
x30            0x0      0
sp             0x0      0x0
pc             0x40000000       0x40000000 <start>
cpsr           0x400003c5       1073742789
fpsr           0x0      0
fpcr           0x0      0
(gdb) disassemble
Dump of assembler code for function start:
=> 0x0000000040000000 <+0>:     b       0x40000048 <start+72>
   0x0000000040000004 <+4>:     nop
   0x0000000040000008 <+8>:     nop
   0x000000004000000c <+12>:    nop
...
  0x0000000040000048 <+72>:    b       0x40013444 <barebox_arm_reset_vector>


then we are branching to <barebox_arm_reset_vector>
Dump of assembler code for function barebox_arm_reset_vector:
=> 0x0000000040013444 <+0>:     stp     x29, x30, [sp, #-16]!
   0x0000000040013448 <+4>:     mov     x29, sp
   0x000000004001344c <+8>:     bl      0x40000050 <arm_cpu_lowlevel_init>

with sp still equals to 0x0.

stepping from there seems to get me "stuck"...
when interrupting gdb (Ctrl-C) and dumping the registers, I'm getting
the feeling I'm out of barebox code with pc equals 0x200

x29            0x0      0
x30            0x0      0
sp             0x0      0x0
pc             0x200    0x200
cpsr           0x3c5    965
fpsr           0x0      0


It's probably some kind of configuration issue...? though I see no
code to set sp before that stp instruction.
I tried toying with the memory map, setting stack and text base
addresses, but it doesn't seem to fix my issue.
Or maybe it's okay to decrement sp while it's equal to 0x0?
Any ideas? comments?

Thx,
Guillaume.

running qemu:
 sudo qemu-system-aarch64 -m 4096M \
 -cpu cortex-a57 -machine virt \
-display none -serial stdio \
 -kernel qemu64/barebox -s -S

[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 9336 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2018.06.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
CONFIG_TEXT_BASE=0x40000000

#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
CONFIG_ARCH_QEMU=y
# CONFIG_ARCH_RMOBILE is not set

#
# Processor Type
#
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_64=y
CONFIG_CPU_V8=y
CONFIG_CPU_64v8=y

#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
CONFIG_ARCH_TEXT_BASE=0x40000000
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_MACH_QEMU_VIRT64=y
CONFIG_64BIT=y

#
# ARM specific settings
#
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
CONFIG_ARM_EXCEPTIONS=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_CACHE=y
CONFIG_FILETYPE=y
CONFIG_BINFMT=y
CONFIG_UIMAGE=y
CONFIG_STDDEV=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y

#
# General Settings
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
CONFIG_ENVIRONMENT_VARIABLES=y
CONFIG_GLOBALVAR=y
CONFIG_NVVAR=y

#
# memory layout
#
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
# CONFIG_MEMORY_LAYOUT_DEFAULT is not set
CONFIG_MEMORY_LAYOUT_FIXED=y
CONFIG_STACK_BASE=0x4007fff0
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_BASE=0x500000000
CONFIG_MALLOC_SIZE=0x400000
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_MALLOC_TLSF is not set
# CONFIG_KALLSYMS is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="barebox:"
CONFIG_BAUDRATE=115200
CONFIG_SIMPLE_READLINE=y
CONFIG_CBSIZE=1024
CONFIG_SHELL_HUSH=y
# CONFIG_SHELL_SIMPLE is not set
# CONFIG_SHELL_NONE is not set
# CONFIG_GLOB is not set
CONFIG_PROMPT_HUSH_PS2="> "
# CONFIG_HUSH_FANCY_PROMPT is not set
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_MENU is not set
# CONFIG_PASSWORD is not set
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
# CONFIG_BOOTM_SHOW_TYPE is not set
# CONFIG_BOOTM_VERBOSE is not set
# CONFIG_BOOTM_INITRD is not set
# CONFIG_BOOTM_OFTREE is not set
# CONFIG_BOOTM_AIMAGE is not set
# CONFIG_BOOTM_FITIMAGE is not set
# CONFIG_FLEXIBLE_BOOTARGS is not set
# CONFIG_IMD is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
CONFIG_CONSOLE_FULL=y
# CONFIG_CONSOLE_SIMPLE is not set
# CONFIG_CONSOLE_NONE is not set
CONFIG_CONSOLE_ACTIVATE_FIRST=y
# CONFIG_CONSOLE_ACTIVATE_ALL is not set
# CONFIG_CONSOLE_ACTIVATE_NONE is not set
# CONFIG_CONSOLE_ALLOW_COLOR is not set
# CONFIG_CONSOLE_RATP is not set
# CONFIG_PARTITION is not set
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW is not set
# CONFIG_DEFAULT_ENVIRONMENT_GENERIC is not set
CONFIG_DEFAULT_ENVIRONMENT_PATH=""
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set
# CONFIG_STATE is not set
# CONFIG_BOOTCHOOSER is not set
# CONFIG_RESET_SOURCE is not set

#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_MEMORY=y

#
# Commands
#

#
# Information
#
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
# CONFIG_CMD_DMESG is not set
CONFIG_CMD_DRVINFO=y
CONFIG_CMD_HELP=y
# CONFIG_LONGHELP is not set
# CONFIG_CMD_IOMEM is not set
# CONFIG_CMD_IMD is not set
# CONFIG_CMD_MEMINFO is not set
CONFIG_CMD_VERSION=y

#
# Boot
#
# CONFIG_CMD_BOOT is not set
CONFIG_CMD_BOOTM=y
# CONFIG_CMD_GO is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_LOADY is not set
# CONFIG_CMD_RESET is not set
# CONFIG_CMD_UIMAGE is not set

#
# Partition
#
# CONFIG_CMD_PARTITION is not set
# CONFIG_CMD_AUTOMOUNT is not set
CONFIG_CMD_MOUNT=y
CONFIG_CMD_UMOUNT=y

#
# Environment
#
# CONFIG_CMD_NV is not set
# CONFIG_CMD_EXPORT is not set
# CONFIG_CMD_DEFAULTENV is not set
# CONFIG_CMD_GLOBAL is not set
# CONFIG_CMD_LOADENV is not set
# CONFIG_CMD_PRINTENV is not set
# CONFIG_CMD_MAGICVAR is not set
# CONFIG_CMD_SAVEENV is not set

#
# File
#
# CONFIG_CMD_BASENAME is not set
CONFIG_CMD_CAT=y
CONFIG_CMD_CD=y
CONFIG_CMD_CP=y
# CONFIG_CMD_CMP is not set
# CONFIG_CMD_DIGEST is not set
# CONFIG_CMD_DIRNAME is not set
# CONFIG_CMD_FILETYPE is not set
# CONFIG_CMD_LN is not set
CONFIG_CMD_LS=y
# CONFIG_CMD_MD5SUM is not set
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
# CONFIG_CMD_READLINK is not set
CONFIG_CMD_RM=y
CONFIG_CMD_RMDIR=y
# CONFIG_CMD_SHA1SUM is not set
# CONFIG_CMD_SHA224SUM is not set
# CONFIG_CMD_SHA256SUM is not set
# CONFIG_CMD_SHA384SUM is not set
# CONFIG_CMD_SHA512SUM is not set
# CONFIG_CMD_UNCOMPRESS is not set

#
# Shell scripting
#
CONFIG_CMD_FALSE=y
# CONFIG_CMD_GETOPT is not set
# CONFIG_CMD_LET is not set
# CONFIG_CMD_MSLEEP is not set
# CONFIG_CMD_READF is not set
# CONFIG_CMD_SLEEP is not set
CONFIG_CMD_TEST=y
CONFIG_CMD_TRUE=y

#
# Console and Framebuffer interaction
#
CONFIG_CMD_CLEAR=y
CONFIG_CMD_ECHO=y
# CONFIG_CMD_ECHO_E is not set
# CONFIG_CMD_EDIT is not set
# CONFIG_CMD_LOGIN is not set
# CONFIG_CMD_READLINE is not set
# CONFIG_CMD_TIMEOUT is not set

#
# Memory
#
# CONFIG_CMD_CRC is not set
CONFIG_CMD_MD=y
CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
# CONFIG_CMD_MEMTEST is not set
# CONFIG_CMD_MM is not set
CONFIG_CMD_MW=y

#
# Hardware manipulation
#
# CONFIG_CMD_DETECT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_POWEROFF is not set
# CONFIG_CMD_SPI is not set

#
# Miscellaneous
#
# CONFIG_CMD_2048 is not set
# CONFIG_CMD_BAREBOX_UPDATE is not set
# CONFIG_CMD_FIRMWARELOAD is not set
# CONFIG_CMD_OF_DUMP is not set
# CONFIG_CMD_OF_NODE is not set
# CONFIG_CMD_OF_PROPERTY is not set
# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
# CONFIG_CMD_OF_FIXUP_STATUS is not set
# CONFIG_CMD_OFTREE is not set
# CONFIG_CMD_TIME is not set
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
# CONFIG_CMD_SEED is not set
# CONFIG_NET is not set

#
# Drivers
#
# CONFIG_OFDEVICE is not set
# CONFIG_AIODEV is not set
CONFIG_ARM_AMBA=y

#
# serial drivers
#
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_DRIVER_SERIAL_NS16550 is not set
# CONFIG_DRIVER_SERIAL_CADENCE is not set
# CONFIG_SCIF_CONSOLE is not set

#
# SPI drivers
#
CONFIG_SPI=y
# CONFIG_I2C is not set
# CONFIG_MTD is not set
# CONFIG_DISK is not set
# CONFIG_USB_HOST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_MUSB is not set
# CONFIG_VIDEO is not set
# CONFIG_MCI is not set
CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
CONFIG_CLOCKSOURCE_ARMV8_TIMER=y

#
# MFD
#
# CONFIG_MFD_MC13XXX is not set
# CONFIG_MFD_SYSCON is not set

#
# Misc devices
#
# CONFIG_SRAM is not set
# CONFIG_LED is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT25 is not set

#
# Input device support
#
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set
# CONFIG_HWRNG is not set

#
# DMA support
#
# CONFIG_W1 is not set
# CONFIG_PINCTRL is not set
# CONFIG_NVMEM is not set

#
# Bus devices
#
# CONFIG_REGULATOR is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RTC_CLASS is not set

#
# Firmware Drivers
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_CRYPTO_HW is not set

#
# Memory controller drivers
#

#
# Filesystem support
#
CONFIG_FS=y
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
# CONFIG_FS_FAT is not set
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set
# CONFIG_FS_PSTORE is not set
# CONFIG_FS_SQUASHFS is not set

#
# ZLIB support disabled
#

#
# LZ4 support disabled
#

#
# LZO support disabled
#

#
# XZ support disabled
#

#
# ZSTD support disabled
#

#
# Library routines
#
CONFIG_PARAMETER=y
CONFIG_UNCOMPRESS=y
# CONFIG_ZLIB is not set
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_ZSTD_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
# CONFIG_LZO_DECOMPRESS is not set
CONFIG_FNMATCH=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set

#
# Library gui routines
#
# CONFIG_BAREBOX_LOGO is not set

#
# Crypto support
#
CONFIG_CRC32=y
CONFIG_CRC16=y
# CONFIG_DIGEST is not set
# CONFIG_CRYPTO_KEYSTORE is not set

#
# Firmware files
#
CONFIG_EXTRA_FIRMWARE_DIR="firmware"

#
# Host Tools
#
# CONFIG_COMPILE_HOST_TOOLS is not set

[-- Attachment #3: barebox_gdb.log --]
[-- Type: application/octet-stream, Size: 6403 bytes --]

 % gdb-multiarch qemu64/barebox
GNU gdb (Ubuntu 8.1-0ubuntu3) 8.1.0.20180409-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from qemu64/barebox...(no debugging symbols found)...done.
(gdb) set architecture aarch64
The target architecture is assumed to be aarch64
(gdb) target remote localhost:1234
Remote debugging using localhost:1234
0x0000000040000000 in start ()
(gdb) info r
x0             0x0      0
x1             0x0      0
x2             0x0      0
x3             0x0      0
x4             0x0      0
x5             0x0      0
x6             0x0      0
x7             0x0      0
x8             0x0      0
x9             0x0      0
x10            0x0      0
x11            0x0      0
x12            0x0      0
x13            0x0      0
x14            0x0      0
x15            0x0      0
x16            0x0      0
x17            0x0      0
x18            0x0      0
x19            0x0      0
x20            0x0      0
x21            0x0      0
x22            0x0      0
x23            0x0      0
x24            0x0      0
x25            0x0      0
x26            0x0      0
x27            0x0      0
x28            0x0      0
x29            0x0      0
x30            0x0      0
sp             0x0      0x0
pc             0x40000000       0x40000000 <start>
cpsr           0x400003c5       1073742789
fpsr           0x0      0
fpcr           0x0      0
(gdb) disassemble
Dump of assembler code for function start:
=> 0x0000000040000000 <+0>:     b       0x40000048 <start+72>
   0x0000000040000004 <+4>:     nop
   0x0000000040000008 <+8>:     nop
   0x000000004000000c <+12>:    nop
   0x0000000040000010 <+16>:    nop
   0x0000000040000014 <+20>:    nop
   0x0000000040000018 <+24>:    fnmls   z2.h, p0/m, z11.h, z18.h
   0x000000004000001c <+28>:    .inst   0x00786f62 ; undefined
   0x0000000040000020 <+32>:    .inst   0xffffffff ; undefined
   0x0000000040000024 <+36>:    .inst   0x00019f18 ; undefined
   0x0000000040000028 <+40>:    .inst   0x55555555 ; undefined
   0x000000004000002c <+44>:    .inst   0x55555555 ; undefined
   0x0000000040000030 <+48>:    .inst   0x55555555 ; undefined
   0x0000000040000034 <+52>:    .inst   0x55555555 ; undefined
   0x0000000040000038 <+56>:    .inst   0x55555555 ; undefined
   0x000000004000003c <+60>:    .inst   0x55555555 ; undefined
   0x0000000040000040 <+64>:    .inst   0x55555555 ; undefined
   0x0000000040000044 <+68>:    .inst   0x55555555 ; undefined
   0x0000000040000048 <+72>:    b       0x40013444 <barebox_arm_reset_vector>
   0x000000004000004c <+76>:    ret
End of assembler dump.
(gdb) s
Single stepping until exit from function start,
which has no line number information.
0x0000000040013444 in barebox_arm_reset_vector ()
(gdb) disassemble
Dump of assembler code for function barebox_arm_reset_vector:
=> 0x0000000040013444 <+0>:     stp     x29, x30, [sp, #-16]!
   0x0000000040013448 <+4>:     mov     x29, sp
   0x000000004001344c <+8>:     bl      0x40000050 <arm_cpu_lowlevel_init>
   0x0000000040013450 <+12>:    mov     x0, #0xc000                     // #49152
   0x0000000040013454 <+16>:    movk    x0, #0xbfff, lsl #16
   0x0000000040013458 <+20>:    mov     sp, x0
   0x000000004001345c <+24>:    mov     x2, #0x0                        // #0
   0x0000000040013460 <+28>:    mov     x1, #0x80000000                 // #2147483648
   0x0000000040013464 <+32>:    mov     x0, #0x40000000                 // #1073741824
   0x0000000040013468 <+36>:    bl      0x40014978 <barebox_arm_entry>
End of assembler dump.
(gdb) info r
x0             0x0      0
x1             0x0      0
x2             0x0      0
x3             0x0      0
x4             0x0      0
x5             0x0      0
x6             0x0      0
x7             0x0      0
x8             0x0      0
x9             0x0      0
x10            0x0      0
x11            0x0      0
x12            0x0      0
x13            0x0      0
x14            0x0      0
x15            0x0      0
x16            0x0      0
x17            0x0      0
x18            0x0      0
x19            0x0      0
x20            0x0      0
x21            0x0      0
x22            0x0      0
x23            0x0      0
x24            0x0      0
x25            0x0      0
x26            0x0      0
x27            0x0      0
x28            0x0      0
x29            0x0      0
x30            0x0      0
sp             0x0      0x0
pc             0x40013444       0x40013444 <barebox_arm_reset_vector>
cpsr           0x400003c5       1073742789
fpsr           0x0      0
fpcr           0x0      0
(gdb) s
Single stepping until exit from function barebox_arm_reset_vector,
which has no line number information.
^C
Program received signal SIGINT, Interrupt.
0x0000000000000200 in ?? ()
(gdb) disassemble
No function contains program counter for selected frame.
(gdb) info r
x0             0x0      0
x1             0x0      0
x2             0x0      0
x3             0x0      0
x4             0x0      0
x5             0x0      0
x6             0x0      0
x7             0x0      0
x8             0x0      0
x9             0x0      0
x10            0x0      0
x11            0x0      0
x12            0x0      0
x13            0x0      0
x14            0x0      0
x15            0x0      0
x16            0x0      0
x17            0x0      0
x18            0x0      0
x19            0x0      0
x20            0x0      0
x21            0x0      0
x22            0x0      0
x23            0x0      0
x24            0x0      0
x25            0x0      0
x26            0x0      0
x27            0x0      0
x28            0x0      0
x29            0x0      0
x30            0x0      0
sp             0x0      0x0
pc             0x200    0x200
cpsr           0x3c5    965
fpsr           0x0      0
fpcr           0x0      0
(gdb)

[-- Attachment #4: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2018-06-28 13:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-28 13:46 ranquet guillaume [this message]
2018-06-29  0:46 ` Andrey Smirnov
2018-06-29  9:01   ` Raphaël Poggi
2018-06-29 17:59     ` Andrey Smirnov
2018-07-03  4:03       ` ranquet guillaume

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAD+NunZeq6S72tt2BKH-PYKTVPjVMyWG4f78uAdxfn0jazV3wA@mail.gmail.com \
    --to=ranquet.guillaume@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox