barebox 2018.04.0 #2 Wed Apr 3 07:55:40 PDT 2019


Board: Phytec phyCORE-i.MX6 Ultra Lite SOM
detected i.MX6 UltraLite revision 1.2
mdio_bus: miibus0: probed
eth0: got preset MAC address: 50:2d:f4:14:96:09
nand: ONFI flash detected
nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABADAH4), 512MiB, page size: 2048, OOB size: 64
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_bbt: ECC error in BBT at 0x00001ffe0005
nand_bbt: ECC error in BBT at 0x00001ffc0005
Scanning device for bad blocks
Bad block table written to 0x00001ffe0000, version 0x01
Bad block table written to 0x00001ffc0000, version 0x01
imx-usb 2184200.usb: USB EHCI 1.00
imx-esdhc 2190000.usdhc: registered as 2190000.usdhc
netconsole: registered as netconsole-1
phySOM-i.MX6: Using environment in NAND flash
malloc space: 0x8fe7d300 -> 0x9fcfa5ff (size 254.5 MiB)
running /env/bin/init...

Hit m for menu or any other key to stop autoboot:    1
booting 'nand'
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 0:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 1:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 2:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 3:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 4:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 5:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 6:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 7:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 8:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 9:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 10:0
nand0.fit1: error -74 (ECC error) while reading 64 bytes from PEB 11:0


....................................................................................................


ubi0: scanning is finished
nand0.fit1: error -74 (ECC error) while reading 22528 bytes from PEB 273:4096
nand0.fit1: error -74 (ECC error) while reading 22528 bytes from PEB 274:4096
ubi0 error: vtbl_check: bad CRC at record 2: 0xf116c36b, not 0x000000
Volume table record 2 dump:
        reserved_pebs   0
        alignment       0
        data_pad        0
        vol_type        0
        upd_marker      0
        name_len        0
        name            NULL
ubi0 error: vtbl_check: bad CRC at record 2: 0xf116c36b, not 0x000000
Volume table record 2 dump:
        reserved_pebs   0
        alignment       0
        data_pad        0
        vol_type        0
        upd_marker      0
        name_len        0
        name            NULL
ubi0 error: process_lvol: both volume tables are corrupted
ubi0 error: ubi_attach_mtd_dev: failed to attach mtd0, error -22