Re: MFGTools from NXP

[Mihaita Ivascu <mihaita_ivascu@trimble.com>]

On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
>
> On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
> > On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>
> >> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> >>> Hello,
> >>>
> >>>    Thanks for your answer. Yes i am able to connect via PUTTY to the target.
> >>>    Then I should use some adb commands in order to push the new
> >>> barebox/firmware ? do you know where I could find some examples?
> >>
> >> fastboot device -l works normally on Linux. You need to check what you need
> >> to do on Windows to do the same. You should only need the Fastboot utility
> >> for this.
> >>
> > [mi] Yes I have both fastboot and adb installed on both Windows and
> > Linux machines. In both cases it does not list any device.
> >        The board is detected as fastboot android is windows device
> > manager. But the fastboot and adb does not list it. same for Linux.
> > Please see attachment
>
> Let's focus on Linux. You don't see a device there?
> What does barebox say? Does it say 'multi_bind: creating Fastboot function'?
> What does you Linux host's dmesg say?


barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ usbgadget -aA
udc0: registering UDC driver [g_multi]
multi_bind: creating Fastboot function
multi_bind: creating ACM function
g_multi usbgadget: Multifunction Composite Gadget
g_multi usbgadget: userspace failed to provide iSerialNumber
g_multi usbgadget: g_multi ready
barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ g_multi usbgadget:
high-speed config #1: Multifunction Composite Gadget

dmesg:

[   25.602275] usb 1-1.3: USB disconnect, device number 3
[   28.359930] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[   28.452971] usb 1-1.3: New USB device found, idVendor=1d6b, idProduct=0104
[   28.452976] usb 1-1.3: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[   28.452980] usb 1-1.3: Product: Phytec phyCORE-i.MX6 Ultra Lite SOM
[   28.457925] cdc_acm 1-1.3:1.1: ttyACM0: USB ACM device


So I see the device on Linux. But fastboot does not list any device on Linux.


>
>
>  >
> >>>
> >>>    Also I have a question: purpose of this activity is for me to be
> >>> able to flash some imx6ul boards that have no firmware: no barebox.
> >>>    So I know hardware config for the port is otg mode but as I have no
> >>> barebox running them before I am wondering if I will be able to
> >>> connect via PUTTY if I do not set the ACM gadget from barebox?
> >>
> >> Check the Embest MarS board's environment in barebox master. It sets up
> >> a fastboot gadget automatically on boot from imx-usb-loader.
> >> You can adjust it to your liking.
> >
> >   [mi] I was not able to find any docs about this board. I will keep
> > searching/asking in the nxp community. If you have already ahve any
> > files related to it would be helpful. Thanks
>
> It's in the barebox next branch (not master, sorry), see here:
> https://github.com/saschahauer/barebox/blob/next/arch/arm/boards/embest-marsboard/defaultenv-mars/init/fastboot
>
> You can copy and adjust the environment setup for your board.
>
> >>
> >> Cheers
> >> Ahmad
> >>
> >>>
> >>> Thanks,
> >>>       Mihaita
> >>>
> >>> On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>>>
> >>>> On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> >>>>> Hello again,
> >>>>>
> >>>>>    I have the target in otg peripheral mode, ADB and fastboot drivers
> >>>>> installed but fastboot does not list any device. The board is detected
> >>>>> in device manager
> >>>>
> >>>> Try enabling the ACM gadget in barebox and connect with PuTTY and see if
> >>>> at least that works. It worked for me on Windows with another i.MX board
> >>>> a month ago.
> >>>>
> >>>> As for fastboot, I don't know how to configure it on Windows, but surely
> >>>> Android Modding boards will have you covered there.
> >>>>
> >>>>>    Please see attachment. Any ideas how should I proceed? Thanks for
> >>>>> the support.
> >>>>
> >>>> You can enable the ACM gadget in barebox and see if that works, I tested
> >>>> it on Windows with an i.MX board a month ago
> >>>>
> >>>> Cheers
> >>>> Ahmad
> >>>>
> >>>>>
> >>>>> Thanks,
> >>>>>       Mihaita
> >>>>>
> >>>>> On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu
> >>>>> <mihaita_ivascu@trimble.com> wrote:
> >>>>>>
> >>>>>> Thanks. I have installed ADB and fastboot drivers for Win from
> >>>>>> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
> >>>>>> I have installed according to the attachment.
> >>>>>> But is not recognized in Windows. I did reboot the system after
> >>>>>> installation but did not add any new env variable.
> >>>>>>
> >>>>>> H:\>fastboot devices -l
> >>>>>> 'fastboot' is not recognized as an internal or external command,
> >>>>>> operable program or batch file.
> >>>>>>
> >>>>>> Thanks,
> >>>>>>       Mihaita
> >>>>>>
> >>>>>>
> >>>>>> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>>>>>>
> >>>>>>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> >>>>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
> >>>>>>> That's what you run on your host system, not on the target.
> >>>>>>> --
> >>>>>>> Pengutronix e.K.                           |                             |
> >>>>>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>>>
> >>>>
> >>>> --
> >>>> Pengutronix e.K.                           |                             |
> >>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>>
> >>
> >>
> >> --
> >> Pengutronix e.K.                           |                             |
> >> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox