From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-iy0-f177.google.com ([209.85.210.177]) by canuck.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1REGyt-0006ei-Gd for barebox@lists.infradead.org; Thu, 13 Oct 2011 08:49:36 +0000 Received: by iarr31 with SMTP id r31so1265126iar.36 for ; Thu, 13 Oct 2011 01:49:30 -0700 (PDT) MIME-Version: 1.0 Date: Thu, 13 Oct 2011 10:49:30 +0200 Message-ID: From: Samuel Stirtzel List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Booting Pandaboard from SD card To: barebox@lists.infradead.org Hi, currently I try to get a Pandaboard to boot out of Barebox, so far I got Barebox up and running. For testing purpose I'd like to boot from a SD card, optimal would be if I could set up the card like the description in the Omappedia tutorial [1]. Is there a tutorial how to set up barebox to boot from SD cards? What I already tried: In the configuration file from arch/arm/boards/panda/env is the description for a network boot configuration, I used this file to start out and wanted to boot from the barebox prompt. Barebox is build from my toolchain and i copy the MLO file, the barebox.bin and the bareboxenv file to the boot partition of the card. For convenience I currently use a precompiled MLO that has been made for u-boot thus I just renamed the barebox.bin file to u-boot.bin. On startup the following messages were displayed: - Texas Instruments X-Loader 1.5.1 (Sep 6 2011 - 13:37:48) Reading boot sector Loading u-boot.bin from mmc barebox 2011.10.0 (Oct 13 2011 - 09:45:17) Board: Texas Instrument's Panda PandaBoard Revision: 003 ehci@ehci0: USB EHCI 1.00 Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB) Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB) running /env/bin/init... not found - For me it looks like i forgot to copy a file or something, any advice? Although booting the uImage with bootm looks ok it won't work, the following message was displayed: - Verifying Checksum ... OK Image Name: Angstrom/2.6.35.7/omap4430-panda Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3688408 Bytes = 3.5 MB Load Address: 80008000 Entry Point: 80008000 OK Starting kernel ... commandline: arch_number: 2791 Uncompressing Linux... done, booting the kernel. - The screen just stays blank after the last message. This looks to me like it is (obviously) caused by an incorrect environment loaded. Help would be appreciated. [1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2 partitions, one for boot files and the other for the rootfs) -- Regards Samuel _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox