From: Yegor Yefremov <yegorslists@googlemail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox <barebox@lists.infradead.org>
Subject: Re: linux.bootargs: export mtdparts from DTS
Date: Fri, 23 Feb 2018 08:52:35 +0100 [thread overview]
Message-ID: <CAGm1_ktHTY=nv+5iKdr3i+sYX4KoDa2cytCCvGhaK47sP2498g@mail.gmail.com> (raw)
In-Reply-To: <CAGm1_ku46ngVkkDQ-Cnt4FCGKgEWjeqmuPT7mA60xw2hq3HT2Q@mail.gmail.com>
On Fri, Feb 23, 2018 at 8:39 AM, Yegor Yefremov
<yegorslists@googlemail.com> wrote:
> On Fri, Feb 23, 2018 at 8:33 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>> Hi Yegor,
>>
>> On Fri, Feb 23, 2018 at 08:26:56AM +0100, Yegor Yefremov wrote:
>>> My board will be configured via DTS file, that contains an MTD
>>> partition table [1]. How can it be automatically exported to
>>> global.inux.bootargs.mtdparts?
>>>
>>> [1] https://git.pengutronix.de/cgit/barebox/tree/arch/arm/dts/am335x-baltos-minimal.dts#n217
>>
>> Why would you want to do that? You are not going to start an ancient
>> kernel with ATAG support, are you?
>
> So far I'm using ancient LTS 3.18.x kernel with this DTS [1] and
> packaging it via FIT.
>
> [1] https://github.com/visionsystemsgmbh/onrisc_br_bsp/blob/master/board/vscom/dts/3.15/onrisc-baltos-ir-5221.dts
I've installed dtc and dumped my loaded DTB in Linux:
nand@0,0 {
reg = <0x0 0x0 0x4>;
gpmc,we-off-ns = <0x28>;
gpmc,oe-on-ns = <0x0>;
gpmc,device-nand = "true";
gpmc,cycle2cycle-delay-ns = <0x0>;
gpmc,wr-access-ns = <0x28>;
gpmc,wr-data-mux-bus-ns = <0x0>;
gpmc,adv-rd-off-ns = <0x22>;
gpmc,oe-off-ns = <0x36>;
gpmc,clk-activation-ns = <0x0>;
gpmc,wait-on-write = "true";
elm_id = <0x42>;
ti,nand-ecc-opt = "bch8";
gpmc,adv-on-ns = <0x6>;
gpmc,adv-wr-off-ns = <0x2c>;
ti,nand-xfer-type = "prefetch-polled";
gpmc,wait-monitoring-ns = <0x0>;
nand-bus-width = <0x8>;
gpmc,device-width = <0x1>;
gpmc,cs-rd-off-ns = <0x2c>;
gpmc,rd-cycle-ns = <0x52>;
#address-cells = <0x1>;
gpmc,bus-turnaround-ns = <0x0>;
gpmc,cs-on-ns = <0x0>;
gpmc,we-on-ns = <0x0>;
#size-cells = <0x1>;
gpmc,wait-on-read = "true";
gpmc,wr-cycle-ns = <0x52>;
gpmc,access-ns = <0x40>;
gpmc,sync-clk-ps = <0x0>;
gpmc,cs-wr-off-ns = <0x2c>;
partitions {
compatible = "fixed-partitions";
#addres-cells = <0x1>;
#size-cells = <0x1>;
partition@260000 {
reg = <0x260000 0xfda0000>;
label = "UBI";
};
partition@0 {
reg = <0x0 0x20000>;
label = "SPL";
};
partition@20000 {
reg = <0x20000 0x20000>;
label = "SPL.backup1";
};
partition@40000 {
reg = <0x40000 0x20000>;
label = "SPL.backup2";
};
partition@60000 {
reg = <0x60000 0x20000>;
label = "SPL.backup3";
};
partition@80000 {
reg = <0x80000 0x1e0000>;
label = "u-boot";
};
};
};
Somehow UBI partition is now the first partition and thus other
partitions were not parsed. Cat /proc/mtd says nothing and I have only
/dev/mtd0.
Yegor
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-02-23 7:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 7:26 Yegor Yefremov
2018-02-23 7:33 ` Sascha Hauer
2018-02-23 7:39 ` Yegor Yefremov
2018-02-23 7:52 ` Yegor Yefremov [this message]
2018-02-23 8:04 ` Sascha Hauer
2018-02-23 8:10 ` Yegor Yefremov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGm1_ktHTY=nv+5iKdr3i+sYX4KoDa2cytCCvGhaK47sP2498g@mail.gmail.com' \
--to=yegorslists@googlemail.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox