From: Yegor Yefremov <yegorslists@googlemail.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy()
Date: Wed, 26 Feb 2020 08:26:23 +0100 [thread overview]
Message-ID: <CAGm1_ktxVZZK=58yuvxfOTgqMcyTrniR1799=7h33RYYRNyLgQ@mail.gmail.com> (raw)
In-Reply-To: <20200225165731.12419-1-a.fatoum@pengutronix.de>
On Tue, Feb 25, 2020 at 5:57 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> am335x_get_usb_phy() retrieves the last probed USB phy. On the BeagleBone
> with both PHYs enabled, this means that dependent on probe order, both
> MUSB instances could end up with the same PHY.
>
> Remove the global variable and have the MUSB driver parse the "phys"
> property instead.
>
> The cleaner way to achieve this would be to migrate phy-am335x.c
> and phy-am335x-control.c to the generic phy framework and have MUSB use
> of_phy_get, alas, even Linux hasn't done this so far and we need
> a short patch for master anyway, thus just do it the easy way.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Tested against the next branch.
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Yegor
> ---
> Prerequisite for fix in next commit. Please apply both to master.
> ---
> drivers/usb/musb/musb_dsps.c | 16 +++++++++++-----
> drivers/usb/musb/phy-am335x.c | 11 ++---------
> drivers/usb/musb/phy-am335x.h | 6 ------
> 3 files changed, 13 insertions(+), 20 deletions(-)
> delete mode 100644 drivers/usb/musb/phy-am335x.h
>
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 3b76b6cc610d..f30672914830 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -39,7 +39,6 @@
> #include <linux/barebox-wrapper.h>
>
> #include "musb_core.h"
> -#include "phy-am335x.h"
>
> static __maybe_unused struct of_device_id musb_dsps_dt_ids[];
>
> @@ -217,10 +216,6 @@ static int dsps_musb_init(struct musb *musb)
> const struct dsps_musb_wrapper *wrp = glue->wrp;
> u32 rev, val, mode;
>
> - musb->xceiv = am335x_get_usb_phy();
> - if (IS_ERR(musb->xceiv))
> - return PTR_ERR(musb->xceiv);
> -
> /* Returns zero if e.g. not clocked */
> rev = dsps_readl(musb->ctrl_base, wrp->revision);
> if (!rev)
> @@ -324,6 +319,8 @@ static int dsps_probe(struct device_d *dev)
> struct musb_hdrc_config *config;
> struct device_node *dn = dev->device_node;
> const struct dsps_musb_wrapper *wrp;
> + struct device_node *phy_node;
> + struct device_d *phy_dev;
> struct dsps_glue *glue;
> int ret;
>
> @@ -337,6 +334,14 @@ static int dsps_probe(struct device_d *dev)
> return -ENODEV;
> }
>
> + phy_node = of_parse_phandle(dn, "phys", 0);
> + if (!phy_node)
> + return -ENODEV;
> +
> + phy_dev = of_find_device_by_node(phy_node);
> + if (!phy_dev || !phy_dev->priv)
> + return -EPROBE_DEFER;
> +
> /* allocate glue */
> glue = kzalloc(sizeof(*glue), GFP_KERNEL);
> if (!glue) {
> @@ -360,6 +365,7 @@ static int dsps_probe(struct device_d *dev)
> glue->musb.ctrl_base = IOMEM(iores->start);
>
> glue->musb.controller = dev;
> + glue->musb.xceiv = phy_dev->priv;
>
> config = &glue->config;
>
> diff --git a/drivers/usb/musb/phy-am335x.c b/drivers/usb/musb/phy-am335x.c
> index df31255d891c..6991f4402d3f 100644
> --- a/drivers/usb/musb/phy-am335x.c
> +++ b/drivers/usb/musb/phy-am335x.c
> @@ -5,7 +5,6 @@
> #include <linux/err.h>
> #include "am35x-phy-control.h"
> #include "musb_core.h"
> -#include "phy-am335x.h"
>
> struct am335x_usbphy {
> void __iomem *base;
> @@ -14,13 +13,6 @@ struct am335x_usbphy {
> struct usb_phy phy;
> };
>
> -static struct am335x_usbphy *am_usbphy;
> -
> -struct usb_phy *am335x_get_usb_phy(void)
> -{
> - return &am_usbphy->phy;
> -}
> -
> static int am335x_init(struct usb_phy *phy)
> {
> struct am335x_usbphy *am_usbphy = container_of(phy, struct am335x_usbphy, phy);
> @@ -31,6 +23,7 @@ static int am335x_init(struct usb_phy *phy)
>
> static int am335x_phy_probe(struct device_d *dev)
> {
> + struct am335x_usbphy *am_usbphy;
> struct resource *iores;
> int ret;
>
> @@ -54,7 +47,7 @@ static int am335x_phy_probe(struct device_d *dev)
> }
>
> am_usbphy->phy.init = am335x_init;
> - dev->priv = am_usbphy;
> + dev->priv = &am_usbphy->phy;
>
> dev_info(dev, "am_usbphy %p enabled\n", &am_usbphy->phy);
>
> diff --git a/drivers/usb/musb/phy-am335x.h b/drivers/usb/musb/phy-am335x.h
> deleted file mode 100644
> index 27da2e3b1057..000000000000
> --- a/drivers/usb/musb/phy-am335x.h
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#ifndef _PHY_AM335x_H_
> -#define _PHY_AM335x_H_
> -
> -struct usb_phy *am335x_get_usb_phy(void);
> -
> -#endif
> --
> 2.25.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-02-26 7:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 16:57 Ahmad Fatoum
2020-02-25 16:57 ` [PATCH 2/2] USB: MUSB: defer driver probes where necessary Ahmad Fatoum
2020-02-26 7:26 ` Yegor Yefremov
2020-02-26 10:48 ` [PATCH] fixup! " Ahmad Fatoum
2020-02-28 10:27 ` Yegor Yefremov
2020-02-28 10:30 ` Ahmad Fatoum
2020-02-26 7:26 ` Yegor Yefremov [this message]
2020-03-02 8:12 ` [PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy() Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGm1_ktxVZZK=58yuvxfOTgqMcyTrniR1799=7h33RYYRNyLgQ@mail.gmail.com' \
--to=yegorslists@googlemail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox