From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Roland Hieber <r.hieber@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration
Date: Fri, 10 Aug 2018 12:29:07 -0700 [thread overview]
Message-ID: <CAHQ1cqECyzAkhA9ULmQDtQ=EUgszYeU-r7s6LNbhFdk4fhV_3w@mail.gmail.com> (raw)
In-Reply-To: <20180810163500.12042-8-r.hieber@pengutronix.de>
On Fri, Aug 10, 2018 at 9:36 AM Roland Hieber <r.hieber@pengutronix.de> wrote:
>
> Having three ints as parameter suggests that we can use up to 2^3
> power configurations for the system, but when we look at the code, the
> power setup is packaged in if {...} else if {...} else if {...} blocks,
> so setting more than one parameter to 1 is useless here.
>
> Refactor the parameters into an enum to get rid of that suggestion.
>
> Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
> arch/arm/boards/duckbill/lowlevel.c | 2 +-
> arch/arm/boards/freescale-mx28-evk/lowlevel.c | 2 +-
> arch/arm/boards/imx233-olinuxino/lowlevel.c | 2 +-
> arch/arm/boards/karo-tx28/lowlevel.c | 2 +-
> arch/arm/mach-mxs/include/mach/init.h | 20 ++++++--
> arch/arm/mach-mxs/power-init.c | 49 +++++++------------
> 6 files changed, 37 insertions(+), 40 deletions(-)
>
> diff --git a/arch/arm/boards/duckbill/lowlevel.c b/arch/arm/boards/duckbill/lowlevel.c
> index cb60667323..3f8e4ad271 100644
> --- a/arch/arm/boards/duckbill/lowlevel.c
> +++ b/arch/arm/boards/duckbill/lowlevel.c
> @@ -51,7 +51,7 @@ static noinline void duckbill_init(void)
>
> pr_debug("initializing power...\n");
>
> - mx28_power_init(0, 0, 1);
> + mx28_power_init(POWER_USE_5V);
>
> pr_debug("initializing SDRAM...\n");
>
> diff --git a/arch/arm/boards/freescale-mx28-evk/lowlevel.c b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> index 2c8d27e801..b6a8793c9e 100644
> --- a/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> @@ -43,7 +43,7 @@ static noinline void freescale_mx28evk_init(void)
>
> pr_debug("initializing power...\n");
>
> - mx28_power_init(0, 1, 0);
> + mx28_power_init(POWER_USE_BATTERY_INPUT);
>
> pr_debug("initializing SDRAM...\n");
>
> diff --git a/arch/arm/boards/imx233-olinuxino/lowlevel.c b/arch/arm/boards/imx233-olinuxino/lowlevel.c
> index bfb50be717..c6cf26b61d 100644
> --- a/arch/arm/boards/imx233-olinuxino/lowlevel.c
> +++ b/arch/arm/boards/imx233-olinuxino/lowlevel.c
> @@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)
>
> pr_debug("initializing power...\n");
>
> - mx23_power_init(0, 0, 1);
> + mx23_power_init(POWER_USE_5V);
>
> pr_debug("initializing SDRAM...\n");
>
> diff --git a/arch/arm/boards/karo-tx28/lowlevel.c b/arch/arm/boards/karo-tx28/lowlevel.c
> index abc223d3b4..5a6a3e3519 100644
> --- a/arch/arm/boards/karo-tx28/lowlevel.c
> +++ b/arch/arm/boards/karo-tx28/lowlevel.c
> @@ -43,7 +43,7 @@ static noinline void karo_tx28_init(void)
>
> pr_debug("initializing power...\n");
>
> - mx28_power_init(0, 1, 0);
> + mx28_power_init(POWER_USE_BATTERY_INPUT);
>
> pr_debug("initializing SDRAM...\n");
>
> diff --git a/arch/arm/mach-mxs/include/mach/init.h b/arch/arm/mach-mxs/include/mach/init.h
> index 66dfd635de..46cf514a86 100644
> --- a/arch/arm/mach-mxs/include/mach/init.h
> +++ b/arch/arm/mach-mxs/include/mach/init.h
> @@ -12,10 +12,22 @@
>
> void mxs_early_delay(int delay);
>
> -void mx23_power_init(int __has_battery, int __use_battery_input,
> - int __use_5v_input);
> -void mx28_power_init(int __has_battery, int __use_battery_input,
> - int __use_5v_input);
> +/**
> + * Power configuration of the system:
> + * - POWER_USE_5V: use 5V input as power supply
> + * - POWER_USE_BATTERY: use battery input when the system is supplied by a battery
> + * - POWER_USE_BATTERY_INPUT: use battery input when the system is supplied by
> + * a DC source (instead of a real battery) on the battery input
> + */
> +enum mxs_power_config {
> + POWER_USE_5V = 0b00000000,
> + POWER_USE_BATTERY = 0b00000001,
> + POWER_USE_BATTERY_INPUT = 0b00000010,
> + __POWER_USE_MASK = 0b00000011,
> +};
> +
> +void mx23_power_init(const int config);
> +void mx28_power_init(const int config);
> void mxs_power_wait_pswitch(void);
>
> extern const uint32_t mx28_dram_vals_default[190];
> diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c
> index 595b51c5ba..a07ff9d676 100644
> --- a/arch/arm/mach-mxs/power-init.c
> +++ b/arch/arm/mach-mxs/power-init.c
> @@ -24,21 +24,7 @@
> #include <mach/regs-rtc.h>
> #include <mach/regs-lradc.h>
>
> -/*
> - * has_battery - true when this board has a battery.
> - */
> -static int has_battery;
> -
> -/*
> - * use_battery_input - true when this board is supplied from the
> - * battery input, but has a DC source instead of a real battery
> - */
> -static int use_battery_input;
> -
> -/*
> - * use_5v_input - true when this board can use the 5V input
> - */
> -static int use_5v_input;
> +static int power_config;
I might be missing something, so take this with a grain of salt. It
seems like if you change this variable to be "power_use" and
initialize it accordingly (maybe using a new helper function
mxs_power_use() that does the bitmasking) you should be able to cut
down on amount of (power_config & __POWER_USE_MASK) statements you
have further in the code.
Thanks,
Andrey Smirnov
>
> static void mxs_power_status(void)
> {
> @@ -514,7 +500,8 @@ static void mxs_power_enable_4p2(void)
> POWER_5VCTRL_HEADROOM_ADJ_MASK,
> 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
>
> - if (has_battery || use_battery_input)
> + if ((power_config & __POWER_USE_MASK) == POWER_USE_BATTERY ||
> + (power_config & __POWER_USE_MASK) == POWER_USE_BATTERY_INPUT)
> dropout_ctrl = POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL;
> else
> dropout_ctrl = POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2;
> @@ -1182,16 +1169,15 @@ static void mx23_ungate_power(void)
> *
> * This function calls all the power block initialization functions in
> * proper sequence to start the power block.
> + *
> + * @config: see enum mxs_power_config for possible options
> */
> -void mx23_power_init(int __has_battery, int __use_battery_input,
> - int __use_5v_input)
> +void mx23_power_init(const int config)
> {
> struct mxs_power_regs *power_regs =
> (struct mxs_power_regs *)IMX_POWER_BASE;
>
> - has_battery = __has_battery;
> - use_battery_input = __use_battery_input;
> - use_5v_input = __use_5v_input;
> + power_config = config;
>
> mx23_ungate_power();
>
> @@ -1204,11 +1190,11 @@ void mx23_power_init(int __has_battery, int __use_battery_input,
>
> mxs_src_power_init();
>
> - if (has_battery)
> + if ((power_config & __POWER_USE_MASK) == POWER_USE_BATTERY)
> mxs_power_configure_power_source();
> - else if (use_battery_input)
> + else if ((power_config & __POWER_USE_MASK) == POWER_USE_BATTERY_INPUT)
> mxs_enable_battery_input();
> - else if (use_5v_input)
> + else if ((power_config & __POWER_USE_MASK) == POWER_USE_5V)
> mxs_boot_valid_5v();
>
> mxs_power_clock2pll();
> @@ -1243,16 +1229,15 @@ void mx23_power_init(int __has_battery, int __use_battery_input,
> *
> * This function calls all the power block initialization functions in
> * proper sequence to start the power block.
> + *
> + * @config: see enum mxs_power_config for possible options
> */
> -void mx28_power_init(int __has_battery, int __use_battery_input,
> - int __use_5v_input)
> +void mx28_power_init(const int config)
> {
> struct mxs_power_regs *power_regs =
> (struct mxs_power_regs *)IMX_POWER_BASE;
>
> - has_battery = __has_battery;
> - use_battery_input = __use_battery_input;
> - use_5v_input = __use_5v_input;
> + power_config = config;
>
> mxs_power_status();
> mxs_power_clock2xtal();
> @@ -1264,11 +1249,11 @@ void mx28_power_init(int __has_battery, int __use_battery_input,
>
> mxs_src_power_init();
>
> - if (has_battery)
> + if ((power_config & __POWER_USE_MASK) == POWER_USE_BATTERY)
> mxs_power_configure_power_source();
> - else if (use_battery_input)
> + else if ((power_config & __POWER_USE_MASK) == POWER_USE_BATTERY_INPUT)
> mxs_enable_battery_input();
> - else if (use_5v_input)
> + else if ((power_config & __POWER_USE_MASK) == POWER_USE_5V)
> mxs_boot_valid_5v();
>
> mxs_power_clock2pll();
> --
> 2.18.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-08-10 19:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 16:34 [PATCH v2 00/14] MXS low-level improvements Roland Hieber
2018-08-10 16:34 ` [PATCH v2 01/14] scripts: mxsimage: Allow unencrypted images Roland Hieber
2018-08-10 16:34 ` [PATCH v2 02/14] images: MXS: allow generation of unencrypted bootstreams Roland Hieber
2018-08-10 16:34 ` [PATCH v2 03/14] ARM: MXS: i.MX28: allow setup of low-voltage SDRAM Roland Hieber
2018-08-10 16:34 ` [PATCH v2 04/14] ARM: MXS: allow configuration of EMI clock prescaler Roland Hieber
2018-08-10 16:34 ` [PATCH v2 05/14] ARM: i.MX28: Add memory size detection Roland Hieber
2018-08-10 16:34 ` [PATCH v2 06/14] ARM: i.MX23: " Roland Hieber
2018-08-10 19:14 ` Andrey Smirnov
2018-08-10 16:34 ` [PATCH v2 07/14] ARM: MXS: refactor mx2*_power_init source configuration Roland Hieber
2018-08-10 19:29 ` Andrey Smirnov [this message]
2018-08-13 13:04 ` Roland Hieber
2018-08-10 16:34 ` [PATCH v2 08/14] ARM: MXS: allow starting from battery input without 4P2 source enabled Roland Hieber
2018-08-10 16:34 ` [PATCH v2 09/14] ARM: MXS: make power levels configurable in mx2*_power_init Roland Hieber
2018-08-10 16:34 ` [PATCH v2 10/14] ARM: MXS: fix VDDx brownout setup logic Roland Hieber
2018-08-10 16:34 ` [PATCH v2 11/14] ARM: MXS: make VDDx brownout setup more understandable Roland Hieber
2018-08-10 16:34 ` [PATCH v2 12/14] ARM: MXS: mxs_power_status: use less magic values Roland Hieber
2018-08-10 16:34 ` [PATCH v2 13/14] ARM: MXS: mxs_power_status: align output Roland Hieber
2018-08-10 16:35 ` [PATCH v2 14/14] Documentation: MXS: general update and improvements Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHQ1cqECyzAkhA9ULmQDtQ=EUgszYeU-r7s6LNbhFdk4fhV_3w@mail.gmail.com' \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=r.hieber@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox