mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 4/8] clk: add divider_recalc_rate helper
Date: Mon, 14 Jan 2019 16:20:04 -0800	[thread overview]
Message-ID: <CAHQ1cqEhbRQiM27vXtn4oExK4ZRVr3Cv8QooHE-=jzEH_V3zZg@mail.gmail.com> (raw)
In-Reply-To: <20190114164211.10871-4-l.stach@pengutronix.de>

On Mon, Jan 14, 2019 at 8:42 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Closer to Linux kernel implementation and needed for imx8mq
> composite clock.
>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/clk/clk-divider.c | 30 ++++++++++++++++++++++--------
>  include/linux/clk.h       |  5 +++++
>  2 files changed, 27 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
> index 791e10ea99cd..7b1bdde1ce18 100644
> --- a/drivers/clk/clk-divider.c
> +++ b/drivers/clk/clk-divider.c
> @@ -20,6 +20,7 @@
>  #include <linux/clk.h>
>  #include <linux/err.h>
>  #include <linux/log2.h>
> +#include <asm-generic/div64.h>
>
>  #define div_mask(d)    ((1 << ((d)->width)) - 1)
>
> @@ -56,17 +57,17 @@ static unsigned int _get_table_div(const struct clk_div_table *table,
>         return 0;
>  }
>
> -static unsigned int _get_div(struct clk_divider *divider, unsigned int val)
> +static unsigned int _get_div(const struct clk_div_table *table,
> +                            unsigned int val, unsigned long flags, u8 width)
>  {
> -       if (divider->flags & CLK_DIVIDER_ONE_BASED)
> +       if (flags & CLK_DIVIDER_ONE_BASED)
>                 return val;
> -       if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
> +       if (flags & CLK_DIVIDER_POWER_OF_TWO)
>                 return 1 << val;
> -       if (divider->table)
> -               return _get_table_div(divider->table, val);
> +       if (table)
> +               return _get_table_div(table, val);
>         return val + 1;
>  }
> -
>  static unsigned int _get_table_val(const struct clk_div_table *table,
>                                                         unsigned int div)
>  {
> @@ -89,6 +90,18 @@ static unsigned int _get_val(struct clk_divider *divider, unsigned int div)
>         return div - 1;
>  }
>
> +unsigned long divider_recalc_rate(struct clk *clk, unsigned long parent_rate,
> +               unsigned int val,
> +               const struct clk_div_table *table,
> +               unsigned long flags, unsigned long width)
> +{
> +       unsigned int div;
> +
> +       div = _get_div(table, val, flags, width);
> +
> +       return DIV_ROUND_UP_ULL((u64)parent_rate, div);

I just rebased on latest 'next', but I don't seem to have the
definition for DIV_ROUND_UP_ULL(), which breaks the build. Is there a
patch that I am missing?

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-01-15  0:20 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-14 16:42 [PATCH 1/8] clk: add missing list.h include Lucas Stach
2019-01-14 16:42 ` [PATCH 2/8] clk: move struct clk_gate into header Lucas Stach
2019-01-14 16:42 ` [PATCH 3/8] clk: move struct clk_mux " Lucas Stach
2019-01-14 16:42 ` [PATCH 4/8] clk: add divider_recalc_rate helper Lucas Stach
2019-01-15  0:20   ` Andrey Smirnov [this message]
2019-01-15  6:43     ` Sascha Hauer
2019-01-14 16:42 ` [PATCH 5/8] clk: imx: add imx8mq composite clock Lucas Stach
2019-01-14 16:42 ` [PATCH 6/8] clk: imx: sync imx8mq clock driver with upstream kernel Lucas Stach
2019-01-14 16:42 ` [PATCH 7/8] pinctrl: imx-v3: imx8mq does use the old binding Lucas Stach
2019-01-14 16:42 ` [PATCH 8/8] ARM: imx8mq: use upstream devicetree Lucas Stach
2019-01-15  0:41   ` Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHQ1cqEhbRQiM27vXtn4oExK4ZRVr3Cv8QooHE-=jzEH_V3zZg@mail.gmail.com' \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=l.stach@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox