mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: [PATCH 00/45] AT91, at91sam9x5ek updates
Date: Tue, 7 Mar 2017 13:09:36 -0800	[thread overview]
Message-ID: <CAHQ1cqEz6H96032_rErSK1zCFCiZA=LAO-8gtjRriG-qnFUUFg@mail.gmail.com> (raw)
In-Reply-To: <20170307081330.gb3iz6gebpbwlt3r@pengutronix.de>

On Tue, Mar 7, 2017 at 12:13 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> Hi Andrey,
>
> On Mon, Mar 06, 2017 at 02:53:11PM -0800, Andrey Smirnov wrote:
>> Hi everyone,
>>
>> I recently had a chance to work with at91sam9x5ek board and as a part
>> of that effort I converted the code to support features found in
>> Barebox for i.MX based SoCs. Most notably this patchset converts
>> at91sam9x5ek to use multi-image PBL build process as well as adds
>> support for board initialization from attached devicetree blob.
>>
>> Sascha, at least for now, all of the patches, in chronological order,
>> are included in this submission. However if this proves to be too
>> burdensome to review, I'd be more than happy to split it into several
>> individual submissions. One such division could be:
>>
>>          - Generic bug fixes/infrastructure enhancements
>>          - Peripheral drivers updates
>>          - at91sam9x5ek specific changes
>>
>> Please let me know if that is preferrable.
>
> I had a short look at all patches, overall they look good. Nevertheless
> it would be good to sort them like you suggested. It just makes it
> easier to apply.
>

OK, will do.

> Thanks for working on this, a general AT91 overhaul was long overdue. I
> hope this series prepares a path to cleanup the other AT91 SoCs aswell.
>

Yeah, I have a bit more AT91 based hardware (at least SAMA5D3 Xplained
board and maybe more), so I was hoping to get those done after this
merge request.

> The clock support you ported over from the kernel is for all AT91 SoCs
> and not only one, right?

Yeah, I belive it should be usable by the whole AT91 family.

Thanks,
Andrey

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-03-07 21:10 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-06 22:53 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 01/45] at91: Fix bug/typo in debug_ll.h Andrey Smirnov
2017-03-06 22:53 ` [PATCH 02/45] at91sam9x5ek: Convert to mult-image build Andrey Smirnov
2017-03-06 22:53 ` [PATCH 03/45] at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig Andrey Smirnov
2017-03-06 22:53 ` [PATCH 04/45] at91sam9x5ek: Add preliminary device tree support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 05/45] clocksource: at91: Move to 'drivers/clocksource' Andrey Smirnov
2017-03-06 22:53 ` [PATCH 06/45] clocksource: at91: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 07/45] serial: atmel: Check result of clk_get() Andrey Smirnov
2017-03-07  7:46   ` Sascha Hauer
2017-03-06 22:53 ` [PATCH 08/45] serial: atmel: Add DT compatibility table Andrey Smirnov
2017-03-06 22:53 ` [PATCH 09/45] regmap: Implement syscon_node_to_regmap() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 10/45] clk: Port two helper functions from Linux Andrey Smirnov
2017-03-06 22:53 ` [PATCH 11/45] clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE Andrey Smirnov
2017-03-06 22:53 ` [PATCH 12/45] clk: No-op CLK_OF_DECLARE if not enabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 13/45] clk: at91: Port at91 DT clock code Andrey Smirnov
2017-03-06 22:53 ` [PATCH 14/45] at91sam9x5ek: Convert to use DT clock tree Andrey Smirnov
2017-03-06 22:53 ` [PATCH 15/45] at91sam9x5ek: Remove at91sam9x5ek_mem_init() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 16/45] at91sam9x5ek: Configure LEDs in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 17/45] pinctrl-at91: Fix a bug in at91_pinctrl_set_conf() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 18/45] at91: Enable PINCTRL for SOC_AT91SAM9 Andrey Smirnov
2017-03-06 22:53 ` [PATCH 19/45] at91sam9x5ek: Configure I2C via DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 20/45] mci: Allow parsing for explicit DT node Andrey Smirnov
2017-03-06 22:53 ` [PATCH 21/45] mci: atmel_mci: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 22/45] at91sam9x5ek: Configure MMC in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 23/45] of: base: Use scoring in DT device matching Andrey Smirnov
2017-03-06 22:53 ` [PATCH 24/45] pinctrl: at91: Fix a bug in at91_pinctrl_set_state Andrey Smirnov
2017-03-06 22:53 ` [PATCH 25/45] pinctrl: at91: Implement .get_direction hook Andrey Smirnov
2017-03-06 22:53 ` [PATCH 26/45] spi: atmel_spi: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 27/45] spi: atmel_spi: Configure CS GPIO as output Andrey Smirnov
2017-03-06 22:53 ` [PATCH 28/45] spi: atmel_spi: Use VERSION register instead of CPU type Andrey Smirnov
2017-03-06 22:53 ` [PATCH 29/45] at91sam9x5ek: Configure SPI in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 30/45] w1-gpio: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 31/45] at91sam9x5ek: Configure 1-wire in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 32/45] usb: ohci-at91: Check result of clk_get() Andrey Smirnov
2017-03-07 16:35   ` Sam Ravnborg
2017-03-07 21:21     ` Andrey Smirnov
2017-03-07 21:52       ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 33/45] usb: ohci-at91: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 34/45] usb: ohci-at91: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 35/45] usb: ohci-at91: Add DT support Andrey Smirnov
2017-03-07 16:40   ` Sam Ravnborg
2017-03-06 22:53 ` [PATCH 36/45] usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled Andrey Smirnov
2017-03-06 22:53 ` [PATCH 37/45] usb: ehci-atmel: Check result of clk_enable() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 38/45] usb: echi-atmel: Convert global variables to private data Andrey Smirnov
2017-03-06 22:53 ` [PATCH 39/45] usb: ehci-atmel: Zero ehci_data before using it Andrey Smirnov
2017-03-06 22:53 ` [PATCH 40/45] usb: echi-atmel: Check result of ehci_register() Andrey Smirnov
2017-03-06 22:53 ` [PATCH 41/45] usb: echi-atmel: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 42/45] at91sam9x5ek: Configure USB in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 43/45] net: macb: Add DT support Andrey Smirnov
2017-03-06 22:53 ` [PATCH 44/45] at91sam9x5ek: Configure Ethernet in DT Andrey Smirnov
2017-03-06 22:53 ` [PATCH 45/45] at91sam9x5ek: Configure NAND " Andrey Smirnov
2017-03-07  8:13 ` [PATCH 00/45] AT91, at91sam9x5ek updates Sascha Hauer
2017-03-07 21:09   ` Andrey Smirnov [this message]
2017-03-07 16:34 ` Sam Ravnborg
2017-03-07 16:56   ` Jean-Christophe PLAGNIOL-VILLARD
2017-03-07 20:58     ` Sam Ravnborg
2017-03-07 21:18       ` Andrey Smirnov
2017-03-07 21:47         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHQ1cqEz6H96032_rErSK1zCFCiZA=LAO-8gtjRriG-qnFUUFg@mail.gmail.com' \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox