mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v1] Documentation: imx: add documentation for RioTboard
@ 2019-04-30  7:01 Oleksij Rempel
  2019-04-30  7:10 ` Andrey Smirnov
  0 siblings, 1 reply; 3+ messages in thread
From: Oleksij Rempel @ 2019-04-30  7:01 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../boards/imx/embest-i.mx6s-riotboard.rst    | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/boards/imx/embest-i.mx6s-riotboard.rst

diff --git a/Documentation/boards/imx/embest-i.mx6s-riotboard.rst b/Documentation/boards/imx/embest-i.mx6s-riotboard.rst
new file mode 100644
index 0000000000..17b630daea
--- /dev/null
+++ b/Documentation/boards/imx/embest-i.mx6s-riotboard.rst
@@ -0,0 +1,133 @@
+Embest RIoTboard
+================
+
+RIoTboard Standard kit
+----------------------
+
+http://www.embest-tech.com/prod_view.aspx?TypeId=74&Id=345&FId=t3:74:3
+
+General Features:
+  * Product Dimensions: 75mm x 120mm
+  * Operating Temperature: 0 ~ 50℃
+  * Operating Humidity: 20% ~ 90% (non-condensing)
+  * DC-in:5V/4A
+
+Processor:
+  * i.MX 6Solo based on ARM Cortex™-A9
+  * 32 Kbyte L1 instruction buffer
+  * 32 Kbyte L1 data buffer
+  * Private counter and watchdog
+  * Cortex-A9 NEON MPE (media processing engine) coprocessor
+
+On-Board Memories:
+  * 4GByte eMMC
+  * 2*512MB DDR3 SDRAM
+
+One-Board Interfaces/Buttons:
+
+  * Audio input/output interfaces
+  * A LVDS interface
+  * A HDMI interface
+  * A LCD display interface (expansion interface)
+  * A digital camera interface
+  * A MIPI interface
+  * 4 TTL-level serial interfaces (one for debugging, the rest for expansion)
+  * 4 high-speed USB2.0 host interfaces (480Mbps)
+  * A high-speed USB2.0 OTG interface (480Mbps)
+  * A SD card slot
+  * A TF card slot
+  * A 10/100M/1Gbps RJ45 interface
+  * 2 I2C interfaces (expansion interfaces)
+  * 2 SPI interfaces (expansion interfaces)
+  * 3 PWM interfaces (expansion interfaces)
+  * A GPIO interface (expansion interfaces)
+  * A JTAG interface
+  * A boot-mode switch
+  * 4 LEDs (1 system LED, 2 custom LED, 1 open SDA LED)
+  * A reset button
+
+How to build barebox for Embest RIoTboard
+-----------------------------------------
+
+Using the default configuration:
+
+.. code-block:: sh
+
+  make ARCH=arm imx_v7_defconfig 
+
+Build the binary image:
+
+.. code-block:: sh
+
+  make ARCH=arm CROSS_COMPILE=armv7compiler
+
+.. note:: replace ``armv7compiler`` with your ARM v7 cross compiler prefix,
+ e.g.: ``arm-linux-gnueabihf-``
+
+The resulting binary image to be flashed will be ``images/barebox-embest-imx6s-riotboard.img``.
+
+Replacing U-Boot with barebox
+-----------------------------
+
+  1. Connect to the boards's UART (115200 8N1);
+
+  2. Turn board's power on;
+
+  3. Wait ``Hit any key to stop autoboot: 2`` prompt and press any key;
+
+  4. Upload barebox image to the board via tftp and start it
+
+.. code-block:: none
+
+  MX6Solo RIoTboard U-Boot > setenv ethaddr d2:2d:ce:88:f4:f1
+  MX6Solo RIoTboard U-Boot > tftpboot 0x20800000 192.168.23.4:ore-barebox-riotboard
+  ----phy_addr=0x4, id= 0x4dd072
+  FEC: Link is Up 796d
+  Using FEC0 device
+  TFTP from server 192.168.23.4; our IP address is 192.168.1.103
+  Filename 'ore-barebox-riotboard'.
+  Load address: 0x20800000
+  Loading: ## Warning: gatewayip needed but not set
+  ## Warning: gatewayip needed but not set
+  ############################################
+  done
+  Bytes transferred = 637947 (9bbfb hex)
+  MX6Solo RIoTboard U-Boot > go 0x20800000
+
+  tarting application at 0x20800000 ...
+
+  barebox 2019.04.0-00151-g86762248de #391 Mon Apr 29 14:41:58 CEST 2019
+
+  Board: RIoTboard i.MX6S
+  detected i.MX6 Solo revision 1.1
+  i.MX reset reason POR (SRSR: 0x00000001)
+  mdio_bus: miibus0: probed
+  imx-usb 2184200.usb@2184200.of: USB EHCI 1.00
+  imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1
+  imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2
+  imx-esdhc 219c000.usdhc@219c000.of: registered as mmc3
+  imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed
+  imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
+  netconsole: registered as netconsole-1
+  malloc space: 0x2fefb5e0 -> 0x4fdf6bbf (size 511 MiB)
+  mmc3: detected MMC card version 4.41
+  mmc3: registered mmc3.boot0
+  mmc3: registered mmc3.boot1
+  mmc3: registered mmc3
+  partition mmc3.3 not completely inside device mmc3
+  mmc3: Failed to register partition 3 on mmc3 (-22)
+  envfs: no envfs (magic mismatch) - envfs never written?
+  running /env/bin/init...
+
+  Hit m for menu or any key to stop autoboot:    2
+
+  type exit to get to the menu
+  barebox@RIoTboard i.MX6S:/ 
+..
+
+  5. Install barebox to the eMMC
+
+.. code-block:: none
+
+  barebox@RIoTboard i.MX6S:/ cp /mnt/tftp/ore-barebox-riotboard /dev/mmc3.barebox 
+..
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-04-30  7:14 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-30  7:01 [PATCH v1] Documentation: imx: add documentation for RioTboard Oleksij Rempel
2019-04-30  7:10 ` Andrey Smirnov
2019-04-30  7:14   ` Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox