mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v3 02/22] clocksource: Add ARM global timer support
Date: Mon, 15 Oct 2018 14:27:25 -0700	[thread overview]
Message-ID: <CAHQ1cqFC5yGxAvQVw9Jtp1J1b2ZXurAJQ4_2wdXZF7qdX+mo6w@mail.gmail.com> (raw)
In-Reply-To: <20181015204633.GA17344@ravnborg.org>

On Mon, Oct 15, 2018 at 1:46 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Andrey.
>
> On Sun, Oct 14, 2018 at 07:21:05PM -0700, Andrey Smirnov wrote:
> > Port corresponding Linux kernel driver. Currently VFxxx SoC is the
> > intended consumer because it doesn't include common i.MX GPT block
> > used as clocksource by other i.MX SoCs.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > ---
> >  drivers/clocksource/Kconfig            |   4 +
> >  drivers/clocksource/Makefile           |   1 +
> >  drivers/clocksource/arm_global_timer.c | 113 +++++++++++++++++++++++++
> >  3 files changed, 118 insertions(+)
> >  create mode 100644 drivers/clocksource/arm_global_timer.c
> >
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > index 3d63f7ff1..6a6c9362a 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -70,3 +70,7 @@ config CLOCKSOURCE_ARMV8_TIMER
> >       bool
> >       default y
> >       depends on ARM && CPU_64v8
> > +
> > +config CLOCKSOURCE_ARM_GLOBAL_TIMER
> > +        bool
> > +     depends on ARM && CPU_V7
>
> Mix of space and tab in the above.
>

Will fix in v4.

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2018-10-15 21:27 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-15  2:21 [PATCH v3 00/22] MV88E6xxx switch family support Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 01/22] ARM: Do not expose ARMv8 functions on ARMv7 Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 02/22] clocksource: Add ARM global timer support Andrey Smirnov
2018-10-15 20:46   ` Sam Ravnborg
2018-10-15 21:27     ` Andrey Smirnov [this message]
2018-10-15  2:21 ` [PATCH v3 03/22] VFxxx: Select CLOCKSOURCE_ARM_GLOBAL_TIMER Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 04/22] i.MX: Move GPT driver to drivers/clocksource Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 05/22] clocksource: Introduce ARCH_HAS_IMX_GPT Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 06/22] of: Demote "Bad cell count for" to debug Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 07/22] aiodev: Don't try to use DT node name as aiodev->name Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 08/22] aiodev: imx_thermal: Give aiodev a more descriptive name Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 09/22] aiodev: qoriq_thermal: " Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 10/22] drivers: Introduce dev_set_name() Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 11/22] base: Don't use shared buffer for results of dev_id() Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 12/22] drivers: base: Convert device_d name to be dynamically allocated Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 13/22] linux: string: Port kbasename() Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 14/22] of: Port latest of_device_make_bus_id() implementation Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 15/22] mdio_bus: Fix documentation for mdio_bus_match() Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 16/22] include: linux: phy: Add missing PHY_INTERFACE_* constants Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 17/22] include: linux: ethtool: Add missing *_UNKNOWN constants Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 18/22] net: phy: Check phy_mask in get_phy_device() Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 19/22] mdio_bus: Allow for non PHY-devices on MDIO buses Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 20/22] net: phy: Add basic driver for MV88E6XXX switches from Marvell Andrey Smirnov
2018-10-15 21:19   ` Sam Ravnborg
2018-10-15 21:35     ` Andrey Smirnov
2018-10-16  5:46       ` Sam Ravnborg
2018-10-15  2:21 ` [PATCH v3 21/22] net: phy: mv88e6xxx: Port EEPROM support code Andrey Smirnov
2018-10-15  2:21 ` [PATCH v3 22/22] net: phy: mv88e6xxx: Add support for MAC ports Andrey Smirnov
2018-10-15  3:33 ` [PATCH v3 00/22] MV88E6xxx switch family support Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHQ1cqFC5yGxAvQVw9Jtp1J1b2ZXurAJQ4_2wdXZF7qdX+mo6w@mail.gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox