mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 00/16]
Date: Tue, 9 Oct 2018 10:30:17 -0700	[thread overview]
Message-ID: <CAHQ1cqFoLOKw+uGF2CF9sO_NMJXCX=5kGFO7FCfcE41n4V9jvw@mail.gmail.com> (raw)
In-Reply-To: <20181008063542.18709-1-andrew.smirnov@gmail.com>

On Sun, Oct 7, 2018 at 11:35 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Everyone:
>
> Patches in this series are a result of my work on porting Linux code
> for MV88E6xxx switches to Barebox.
>
>      - Patch 1 is loosely related header fix
>
>      - Patch 2 adds clocksource support for ARM global time, needed on
>        VF610 in order to get an accurate clocksource. MV88E6xxx EEPROM
>        supporte code turned out to be dependent on that.
>
>      - Pathes 3 and 4 are clocksource related fixes
>
>      - Patches 5, 6, 7, 8 update the device naming scheme used by
>        Barebox driver code. Old scheme couldn't handle devices created
>        for DT nodes with identical names. This was the case on ZII
>        VF610 Development Board Rev. C which had two switch devices.
>
>     - Patch 9 is documentation/small code fix for generic MDIO bus
>       code
>
>     - Patches 10, 11 bring needed preprocessor constants from Linux kernel
>
>     - Patch 12 prevents PHYs masked by MDIO bus's phy_maks from being
>       probed
>
>     - Patch 13 allows custom platform deviecs to be attached to an MDIO bus
>
>     - Patch 14 exposes internal MDIO bus on MV88E6xxx devices
>
>     - Patch 15 support for EEPROM devices attached to MV88E6xxx devices
>
>     - Patch 16 exposes ports that don't have a PHY attached as
>       "virtual" PHY devices (RPU2 needs this code to properly
>       configure port connected to FEC)
>
> NOTE: This is quite a mix and I am more than happy to split this
> series in several if current patch grouping is problematic.
>
> Tested on the following H/W:
>
>      - ZII i.MX6Q RDU2, MV88E6352 switch
>      - ZII i.MX51 RDU1, MV88E6161 switch
>      - ZII i.MX7D RPU2, MV88E6352 switch
>      - ZII VF610 CFU1, MV88E6352 switch
>      - ZII VF610 SPU3, MV88E6390X switch
>      - ZII VF610 Development Board Rev. C, MV88E6390X switch x 2
>
> Feedback is welcome!
>
> Thanks,
> Andrey Smirnov
>

This is really embarrassing that I forgot to have an actual subject
line for this series. Will fix in v2.

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2018-10-09 17:30 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08  6:35 Andrey Smirnov
2018-10-08  6:35 ` [PATCH 01/16] ARM: Do not expose ARMv8 functions on ARMv7 Andrey Smirnov
2018-10-08  6:35 ` [PATCH 02/16] clocksource: Add ARM global timer support Andrey Smirnov
2018-10-08  8:17   ` Sascha Hauer
2018-10-08 15:37     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 03/16] i.MX: Move GPT driver to drivers/clocksource Andrey Smirnov
2018-10-08  6:35 ` [PATCH 04/16] clocksource: Introduce ARCH_HAS_IMX_GPT Andrey Smirnov
2018-10-08  6:35 ` [PATCH 05/16] of: Demote "Bad cell count for" to debug Andrey Smirnov
2018-10-08  6:35 ` [PATCH 06/16] drivers: Introduce dev_set_name() Andrey Smirnov
2018-10-09 15:41   ` Sam Ravnborg
2018-10-09 17:10     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 07/16] linux: string: Port kbasename() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 08/16] of: Port latest of_device_make_bus_id() implementation Andrey Smirnov
2018-10-08  6:35 ` [PATCH 09/16] mdio_bus: Fix documentation for mdio_bus_match() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 10/16] include: linux: phy: Add missing PHY_INTERFACE_* constants Andrey Smirnov
2018-10-08  6:35 ` [PATCH 11/16] include: linux: ethtool: Add missing *_UNKNOWN constants Andrey Smirnov
2018-10-08  6:35 ` [PATCH 12/16] net: phy: Check phy_mask in get_phy_device() Andrey Smirnov
2018-10-08  6:35 ` [PATCH 13/16] mdio_bus: Allow for non PHY-devices on MDIO buses Andrey Smirnov
2018-10-08  8:44   ` Sascha Hauer
2018-10-08 15:41     ` Andrey Smirnov
2018-10-08  6:35 ` [PATCH 14/16] net: phy: Add basic driver for MV88E6XXX switches from Marvell Andrey Smirnov
2018-10-08  6:35 ` [PATCH 15/16] net: phy: mv88e6xxx: Port EEPROM support code Andrey Smirnov
2018-10-08  6:35 ` [PATCH 16/16] net: phy: mv88e6xxx: Add support for MAC ports Andrey Smirnov
2018-10-09 17:30 ` Andrey Smirnov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHQ1cqFoLOKw+uGF2CF9sO_NMJXCX=5kGFO7FCfcE41n4V9jvw@mail.gmail.com' \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox