mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 2/2] ARM: i.MX: xload: Add support for signed HDMI firmware
Date: Wed, 29 Aug 2018 21:56:16 -0700	[thread overview]
Message-ID: <CAHQ1cqGLy3D7PVkd-hFuc99yjOsMyHa2KaBcQ0ypv0ZqzFAZiw@mail.gmail.com> (raw)
In-Reply-To: <20180827072108.my36w3twftmuidlh@pengutronix.de>

On Mon, Aug 27, 2018 at 12:21 AM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> On Thu, Aug 23, 2018 at 08:23:01PM -0700, Andrey Smirnov wrote:
> > When booting images that have HDMI firmware embedded we need to skip
> > the first v2 header we encounter and get all of the necessary data
> > from the next one. Add code implementing that.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > ---
> >  arch/arm/mach-imx/xload-esdhc.c | 43 +++++++++++++++++++++++++--------
> >  1 file changed, 33 insertions(+), 10 deletions(-)
> >
> > diff --git a/arch/arm/mach-imx/xload-esdhc.c b/arch/arm/mach-imx/xload-esdhc.c
> > index 55d6c6929..cab024cfe 100644
> > --- a/arch/arm/mach-imx/xload-esdhc.c
> > +++ b/arch/arm/mach-imx/xload-esdhc.c
> > @@ -224,24 +224,47 @@ esdhc_start_image(struct esdhc *esdhc, ptrdiff_t address, ptrdiff_t entry, u32 o
> >  {
> >
> >       void *buf = (void *)address;
> > -     struct imx_flash_header_v2 *hdr = buf + offset + SZ_1K;
> > +     struct imx_flash_header_v2 *hdr;
> >       int ret, len;
> >       void __noreturn (*bb)(void);
> >       unsigned int ofs;
> > +     int i, header_count = 1;
> >
> >       len = imx_image_size();
> >       len = ALIGN(len, SECTOR_SIZE);
> >
> > -     ret = esdhc_read_blocks(esdhc, buf, offset + SZ_1K + SECTOR_SIZE);
> > -     if (ret)
> > -             return ret;
> > +     for (i = 0; i < header_count; i++) {
> > +             ret = esdhc_read_blocks(esdhc, buf,
> > +                                     offset + SZ_1K + SECTOR_SIZE);
> > +             if (ret)
> > +                     return ret;
> >
> > -     if (!is_imx_flash_header_v2(hdr)) {
> > -             pr_debug("IVT header not found on SD card. "
> > -                      "Found tag: 0x%02x length: 0x%04x version: %02x\n",
> > -                      hdr->header.tag, hdr->header.length,
> > -                      hdr->header.version);
> > -             return -EINVAL;
> > +             hdr = buf + offset + SZ_1K;
> > +
> > +             if (!is_imx_flash_header_v2(hdr)) {
> > +                     pr_debug("IVT header not found on SD card. "
> > +                              "Found tag: 0x%02x length: 0x%04x "
> > +                              "version: %02x\n",
> > +                              hdr->header.tag, hdr->header.length,
> > +                              hdr->header.version);
> > +                     return -EINVAL;
> > +             }
> > +
> > +             if (IS_ENABLED(CONFIG_ARCH_IMX8MQ) &&
> > +                 hdr->boot_data.plugin & PLUGIN_HDMI_IMAGE) {
> > +                     /*
> > +                      * In images that include signed HDMI
> > +                      * firmware, first v2 header would be
> > +                      * dedicated to that and would not contain any
> > +                      * useful for us information. In order for us
> > +                      * to pull the rest of the bootloader image
> > +                      * in, we need to re-read header from SD/MMC,
> > +                      * this time skipping anything HDMI firmware
> > +                      * related.
> > +                      */
> > +                     offset += PLUGIN_HDMI_SIZE;
> > +                     header_count++;
>
> Wouldn't it be better to get to the second image by reading the size to
> skip from the first image rather than adding a fixed offset?

Sure, will change in v2.

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2018-08-30  4:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24  3:23 [PATCH 1/2] scripts: imx: " Andrey Smirnov
2018-08-24  3:23 ` [PATCH 2/2] ARM: i.MX: xload: " Andrey Smirnov
2018-08-27  7:21   ` Sascha Hauer
2018-08-30  4:56     ` Andrey Smirnov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHQ1cqGLy3D7PVkd-hFuc99yjOsMyHa2KaBcQ0ypv0ZqzFAZiw@mail.gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox