mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 00/21] PCIe support for i.MX7
@ 2019-01-09  7:11 Andrey Smirnov
  2019-01-09  7:11 ` [PATCH 01/21] regulator: Convert drivers to use struct regulator_desc Andrey Smirnov
                   ` (20 more replies)
  0 siblings, 21 replies; 27+ messages in thread
From: Andrey Smirnov @ 2019-01-09  7:11 UTC (permalink / raw)
  To: barebox; +Cc: Andrey Smirnov

Everyone:

This seires is a build-up on previously submitted PCI sync set [1] and
contains the patches I created while working on adding support for
PCIe on i.MX7. The series consists of following:

 - Patches adding necessary regulator pluming to support porint ANATOP
   driver

 - ANATOP driver port

 - Port of basic power domain infrastructure from Linux kernel needed
   for controlling GPCv2 (useful for both i.MX7 and, especially, for
   i.MX8MQ)

 - Port of GPCv2 driver from Linux as well as of some bug fixes for it

 - Port of i.MX7 reset controller driver

 - Patches adding support for i.MX7 to existing i.MX6 PCIe host
   controller driver

 - Misc fixes

This series has been tested on i.MX7D SabreSD board against Toshiba
NVMe device.

Feedback is welcome!

Thanks,
Andrey Smirnov

[1] http://lists.infradead.org/pipermail/barebox/2018-December/036005.html

Andrey Smirnov (21):
  regulator: Convert drivers to use struct regulator_desc
  regulator: Port basic regmap regulator functions
  regulator: Add support for setting regulator's voltage
  base: driver: Drop redundant list_empty() check
  base: Port driver_deferred_probe_check_state() from Linux
  regulator: Add primitive support for deferred probe
  regulator: Port ANATOP driver from Linux
  drivers: base: Port power management code from Linux
  soc: imx: Add GPCv2 power gating driver
  soc: imx: gpcv2: fix regulator deferred probe
  soc: imx: gpcv2: correct PGC offset
  reset: Add i.MX7 SRC reset driver
  reset: imx7: Fix always writing bits as 0
  reset: Mark local functions as static
  PCI: imx6: Add code to support i.MX7D
  PCI: imx6: Allow probe deferral by reset GPIO
  PCI: imx6: Do not wait for speed change on i.MX7
  PCI: imx6: Do not switch speed if Gen2 is disabled
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  PCI: imx6: Drop unnecessary root_bus_nr setting
  PCI: imx6: Port imx6_pcie_ltssm_enable()

 arch/arm/mach-imx/Kconfig            |   1 +
 drivers/Kconfig                      |   2 +
 drivers/Makefile                     |   1 +
 drivers/base/Kconfig                 |   3 +
 drivers/base/Makefile                |   4 +-
 drivers/base/driver.c                |  68 ++++--
 drivers/base/platform.c              |   7 +
 drivers/base/power.c                 | 245 +++++++++++++++++++++
 drivers/pci/Kconfig                  |   4 +-
 drivers/pci/pci-imx6.c               | 245 +++++++++++++++------
 drivers/regulator/Kconfig            |   8 +
 drivers/regulator/Makefile           |   5 +-
 drivers/regulator/anatop-regulator.c | 161 ++++++++++++++
 drivers/regulator/bcm2835.c          |   6 +-
 drivers/regulator/core.c             |  60 ++++-
 drivers/regulator/fixed.c            |   6 +-
 drivers/regulator/helpers.c          | 186 ++++++++++++++++
 drivers/reset/Kconfig                |  11 +
 drivers/reset/Makefile               |   1 +
 drivers/reset/core.c                 |   8 +-
 drivers/reset/reset-imx7.c           | 151 +++++++++++++
 drivers/soc/imx/Kconfig              |   9 +
 drivers/soc/imx/Makefile             |   1 +
 drivers/soc/imx/gpcv2.c              | 315 +++++++++++++++++++++++++++
 include/driver.h                     |   2 +
 include/pm_domain.h                  |  82 +++++++
 include/regulator.h                  |  41 +++-
 27 files changed, 1524 insertions(+), 109 deletions(-)
 create mode 100644 drivers/base/Kconfig
 create mode 100644 drivers/base/power.c
 create mode 100644 drivers/regulator/anatop-regulator.c
 create mode 100644 drivers/regulator/helpers.c
 create mode 100644 drivers/reset/reset-imx7.c
 create mode 100644 drivers/soc/imx/Kconfig
 create mode 100644 drivers/soc/imx/Makefile
 create mode 100644 drivers/soc/imx/gpcv2.c
 create mode 100644 include/pm_domain.h

-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 27+ messages in thread

end of thread, other threads:[~2019-01-12  4:24 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-09  7:11 [PATCH 00/21] PCIe support for i.MX7 Andrey Smirnov
2019-01-09  7:11 ` [PATCH 01/21] regulator: Convert drivers to use struct regulator_desc Andrey Smirnov
2019-01-09  7:11 ` [PATCH 02/21] regulator: Port basic regmap regulator functions Andrey Smirnov
2019-01-09  7:11 ` [PATCH 03/21] regulator: Add support for setting regulator's voltage Andrey Smirnov
2019-01-09  7:11 ` [PATCH 04/21] base: driver: Drop redundant list_empty() check Andrey Smirnov
2019-01-09  7:11 ` [PATCH 05/21] base: Port driver_deferred_probe_check_state() from Linux Andrey Smirnov
2019-01-09  7:11 ` [PATCH 06/21] regulator: Add primitive support for deferred probe Andrey Smirnov
2019-01-09  7:11 ` [PATCH 07/21] regulator: Port ANATOP driver from Linux Andrey Smirnov
2019-01-09  7:11 ` [PATCH 08/21] drivers: base: Port power management code " Andrey Smirnov
2019-01-09  7:11 ` [PATCH 09/21] soc: imx: Add GPCv2 power gating driver Andrey Smirnov
2019-01-09  7:11 ` [PATCH 10/21] soc: imx: gpcv2: fix regulator deferred probe Andrey Smirnov
2019-01-10  7:37   ` Sascha Hauer
2019-01-10 19:20     ` Andrey Smirnov
2019-01-09  7:12 ` [PATCH 11/21] soc: imx: gpcv2: correct PGC offset Andrey Smirnov
2019-01-09  7:12 ` [PATCH 12/21] reset: Add i.MX7 SRC reset driver Andrey Smirnov
2019-01-09  7:12 ` [PATCH 13/21] reset: imx7: Fix always writing bits as 0 Andrey Smirnov
2019-01-10  7:38   ` Sascha Hauer
2019-01-09  7:12 ` [PATCH 14/21] reset: Mark local functions as static Andrey Smirnov
2019-01-09  7:12 ` [PATCH 15/21] PCI: imx6: Add code to support i.MX7D Andrey Smirnov
2019-01-09  7:12 ` [PATCH 16/21] PCI: imx6: Allow probe deferral by reset GPIO Andrey Smirnov
2019-01-10  8:05   ` Sascha Hauer
2019-01-12  4:24     ` Andrey Smirnov
2019-01-09  7:12 ` [PATCH 17/21] PCI: imx6: Do not wait for speed change on i.MX7 Andrey Smirnov
2019-01-09  7:12 ` [PATCH 18/21] PCI: imx6: Do not switch speed if Gen2 is disabled Andrey Smirnov
2019-01-09  7:12 ` [PATCH 19/21] PCI: imx6: Fix spelling mistake: "contol" -> "control" Andrey Smirnov
2019-01-09  7:12 ` [PATCH 20/21] PCI: imx6: Drop unnecessary root_bus_nr setting Andrey Smirnov
2019-01-09  7:12 ` [PATCH 21/21] PCI: imx6: Port imx6_pcie_ltssm_enable() Andrey Smirnov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox