From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v4 0/25] at91: move reset vector to board code
Date: Thu, 4 Jan 2018 09:12:03 -0800 [thread overview]
Message-ID: <CAHQ1cqGrWvbfY-Y=OouEYKorVLCMspz7uz+Ca7vGrjO+pVCoyQ@mail.gmail.com> (raw)
In-Reply-To: <20171231083407.GA16645@ravnborg.org>
On Sun, Dec 31, 2017 at 12:34 AM, Sam Ravnborg <sam@ravnborg.org> wrote:
> The following patchset moves the reset vector
> for at91 boards from mach-at91 to board code.
> This is similar to what other boards do and is done to
> prepare for multi-image and DT support.
>
> The patchset convert all boards and thus clean up the
> old code that resided in mach-at91/
>
> The first patch have minimal impact, but prepares for a
> board-by-board conversion.
> All temporary CONFIG symbols are gone at the end of this series.
>
> I kept Jean-Christophe PLAGNIOL-VILLARD and others
> copyright in all the created files and did not add
> copyright myself. The patchset does IMO not add any
> copyrightable material from my side as this is
> in reality just moving around code.
>
> With this patchset applied we no longer have any
> places where we call board code from mach-at91/
> thus allowing us to introduce multi-images.
> And we are also on the right track to introduce
> DT support for additional AT91 based boards.
>
> The patchset was successfully booted on a AT91SAM9263EK,
> and all defconfigs was built (expect the ones that failed
> to build before this patchset was applied).
>
> I consider the patchset ready for barebox-next.
>
> Sam
>
> Changes v4 => v3
> Updated at91sam926x_board_init.h based on feedback from Andrey Smirnov
>
> Changes v2 => v3
> v2 was posted in July - but I have lacked spare time until now
> to give it a proper respin
> - respin of all patches on top of v2017.12.0
> - fix bogus handling of at91sam926x_board_init
> - Introduce new CONFIG symbol for at91sam926x_board_init to allow bisects
>
> Changes v1 => v2
> - converted all boards over
> - fixed author info
>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>
> Sam Ravnborg (25):
> arm: at91: refactor lowlevel_init selection
> arm: at91: drop unused at91sam9x5_lowlevel_init.c
> arm: at91: add at91sam926x_board_init.h
> arm: at91: code cleanup in at91sam926x_board_init
> at91sam9263ek: move reset vector to board code
> at91sam9261ek, at91sam9g10ek: move reset vector to board code
> pm9261: move reset vector to board code
> at91: drop unused at91sam9261_lowlevel_init
> pm9263: move reset vector to board code
> usb-a926x: move reset vector to board code
> mmccpu: delete unused lowlevel_init
> mmccpu: move reset vector to board code
> tny-a926x: delete unused tny_a9263_lowlevel_init.c
> tny-a926x: move reset vector to board code
> qil-a926x: move reset vector to board code
> haba-knx: move reset vector to board code
> sama5d{3,4}{xek,xplained}: move reset vector to board code
> at91sam9n12ek: move reset vector to board code
> at91sam9260ek, at91sam9g20ek: move reset vector to board code
> at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code
> animeo: move reset vector to board code
> telit-evk-pro3: move reset vector to board code
> dss11: move reset vector to board code
> at91rm9200ek: move reset vector to board code
> arm: at91: remove leftovers from moving reset code in mach-at91
>
>
> # git diff --stat=120 -M -C HEAD~36..HEAD~11
> # Note options above to let git track copies/renames
> arch/arm/boards/animeo_ip/Makefile | 3 +
> arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/animeo_ip/lowlevel.c} | 17 +++--
> arch/arm/boards/at91rm9200ek/Makefile | 3 +
> .../at91rm9200_lowlevel_init.c => boards/at91rm9200ek/lowlevel.c} | 14 ++--
> arch/arm/boards/at91sam9260ek/Makefile | 3 +
> .../{mach-at91/sama5d3_lowlevel_init.c => boards/at91sam9260ek/lowlevel.c} | 17 +++--
> arch/arm/boards/at91sam9261ek/Makefile | 2 +-
> arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 +++++++---
> arch/arm/boards/at91sam9263ek/Makefile | 2 +-
> arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++++++++---
> arch/arm/boards/at91sam9m10g45ek/Makefile | 3 +
> .../at91sam9g45_lowlevel_init.c => boards/at91sam9m10g45ek/lowlevel.c} | 11 +--
> arch/arm/boards/at91sam9m10ihd/Makefile | 2 +
> .../at91sam9x5_lowlevel_init.c => boards/at91sam9m10ihd/lowlevel.c} | 19 +++--
> arch/arm/boards/at91sam9n12ek/Makefile | 3 +
> .../at91sam9n12_lowlevel_init.c => boards/at91sam9n12ek/lowlevel.c} | 13 ++--
> arch/arm/boards/dss11/Makefile | 2 +
> arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/dss11/lowlevel.c} | 17 +++--
> arch/arm/boards/haba-knx/Makefile | 3 +
> arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/haba-knx/lowlevel.c} | 17 +++--
> arch/arm/boards/mmccpu/Makefile | 2 +-
> .../arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/mmccpu/lowlevel.c} | 19 +++--
> arch/arm/boards/mmccpu/lowlevel_init.c | 135 --------------------------------
> arch/arm/boards/pm9261/Makefile | 2 +-
> arch/arm/boards/pm9261/lowlevel_init.c | 39 +++++++---
> arch/arm/boards/pm9263/Makefile | 2 +-
> arch/arm/boards/pm9263/lowlevel_init.c | 43 ++++++++---
> arch/arm/boards/pm9g45/Makefile | 3 +
> .../arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/pm9g45/lowlevel.c} | 13 ++--
> arch/arm/boards/qil-a926x/Makefile | 3 +
> arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/qil-a926x/lowlevel.c} | 17 +++--
> arch/arm/boards/sama5d3_xplained/Makefile | 1 +
> .../sama5d3_lowlevel_init.c => boards/sama5d3_xplained/lowlevel.c} | 10 +--
> arch/arm/boards/sama5d3xek/Makefile | 1 +
> .../arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3xek/lowlevel.c} | 10 +--
> arch/arm/boards/sama5d4_xplained/Makefile | 1 +
> .../sama5d3_lowlevel_init.c => boards/sama5d4_xplained/lowlevel.c} | 10 +--
> arch/arm/boards/sama5d4ek/Makefile | 1 +
> arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4ek/lowlevel.c} | 10 +--
> arch/arm/boards/telit-evk-pro3/Makefile | 2 +
> .../{mach-at91/sama5d3_lowlevel_init.c => boards/telit-evk-pro3/lowlevel.c} | 17 +++--
> arch/arm/boards/tny-a926x/Makefile | 8 +-
> .../sama5d3_lowlevel_init.c => boards/tny-a926x/tny_a9260_lowlevel.c} | 17 +++--
> .../at91sam9n12_lowlevel_init.c => boards/tny-a926x/tny_a9263_lowlevel.c} | 19 +++--
> arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c | 107 --------------------------
> arch/arm/boards/usb-a926x/Makefile | 8 +-
> .../sama5d3_lowlevel_init.c => boards/usb-a926x/usb_a9260_lowlevel.c} | 17 +++--
> .../boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 ++++++++---
> arch/arm/mach-at91/Kconfig | 31 ++++----
> arch/arm/mach-at91/Makefile | 14 +---
> arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 48 ------------
> arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 ------------
> arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 48 ------------
> arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 46 -----------
> .../{at91sam926x_lowlevel_init.c => include/mach/at91sam926x_board_init.h} | 148 ++++++++++++++++--------------------
> 55 files changed, 422 insertions(+), 756 deletions(-)
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2018-01-04 17:12 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-31 8:34 Sam Ravnborg
2018-01-01 8:34 ` Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...] Sam Ravnborg
2018-01-01 17:05 ` Sam Ravnborg
2018-01-03 18:19 ` Sam Ravnborg
2018-01-01 14:16 ` [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c Sam Ravnborg
2018-01-01 14:16 ` [PATCH 03/25] arm: at91: add at91sam926x_board_init.h Sam Ravnborg
2018-01-01 14:16 ` [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 05/25] at91sam9263ek: move reset vector to board code Sam Ravnborg
2018-01-01 14:16 ` [PATCH 06/25] at91sam9261ek, at91sam9g10ek: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 07/25] pm9261: " Sam Ravnborg
2018-01-01 14:16 ` [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init Sam Ravnborg
2018-01-01 14:16 ` [PATCH 09/25] pm9263: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 11/25] mmccpu: delete unused lowlevel_init Sam Ravnborg
2018-01-05 9:14 ` Sascha Hauer
2018-01-06 9:33 ` Sam Ravnborg
2018-01-01 14:18 ` [PATCH 12/25] mmccpu: move reset vector to board code Sam Ravnborg
2018-01-01 14:18 ` [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c Sam Ravnborg
2018-01-01 14:19 ` [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code Sam Ravnborg
2018-01-05 9:27 ` Sascha Hauer
2018-01-06 20:06 ` Sam Ravnborg
2018-01-01 14:19 ` [PATCH 18/25] at91sam9n12ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 19/25] at91sam9260ek, at91sam9g20ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 21/25] animeo: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 22/25] telit-evk-pro3: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 23/25] dss11: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 24/25] at91rm9200ek: " Sam Ravnborg
2018-01-01 14:19 ` [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91 Sam Ravnborg
2018-01-01 16:48 ` [PATCH 01/25] arm: at91: refactor lowlevel_init selection Sam Ravnborg
2018-01-05 9:24 ` Sascha Hauer
2018-01-01 16:48 ` [PATCH 10/25] usb-a926x: move reset vector to board code Sam Ravnborg
2018-01-01 16:48 ` [PATCH 14/25] tny-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 15/25] qil-a926x: " Sam Ravnborg
2018-01-01 16:48 ` [PATCH 16/25] haba-knx: " Sam Ravnborg
2018-01-04 17:12 ` Andrey Smirnov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAHQ1cqGrWvbfY-Y=OouEYKorVLCMspz7uz+Ca7vGrjO+pVCoyQ@mail.gmail.com' \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox