From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-qt0-x244.google.com ([2607:f8b0:400d:c0d::244]) by bombadil.infradead.org with esmtps (Exim 4.89 #1 (Red Hat Linux)) id 1eX93x-0000Hp-0o for barebox@lists.infradead.org; Thu, 04 Jan 2018 17:12:18 +0000 Received: by mail-qt0-x244.google.com with SMTP id i40so2661815qti.8 for ; Thu, 04 Jan 2018 09:12:05 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <20171231083407.GA16645@ravnborg.org> References: <20171231083407.GA16645@ravnborg.org> From: Andrey Smirnov Date: Thu, 4 Jan 2018 09:12:03 -0800 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v4 0/25] at91: move reset vector to board code To: Sam Ravnborg Cc: Barebox List On Sun, Dec 31, 2017 at 12:34 AM, Sam Ravnborg wrote: > The following patchset moves the reset vector > for at91 boards from mach-at91 to board code. > This is similar to what other boards do and is done to > prepare for multi-image and DT support. > > The patchset convert all boards and thus clean up the > old code that resided in mach-at91/ > > The first patch have minimal impact, but prepares for a > board-by-board conversion. > All temporary CONFIG symbols are gone at the end of this series. > > I kept Jean-Christophe PLAGNIOL-VILLARD and others > copyright in all the created files and did not add > copyright myself. The patchset does IMO not add any > copyrightable material from my side as this is > in reality just moving around code. > > With this patchset applied we no longer have any > places where we call board code from mach-at91/ > thus allowing us to introduce multi-images. > And we are also on the right track to introduce > DT support for additional AT91 based boards. > > The patchset was successfully booted on a AT91SAM9263EK, > and all defconfigs was built (expect the ones that failed > to build before this patchset was applied). > > I consider the patchset ready for barebox-next. > > Sam > > Changes v4 => v3 > Updated at91sam926x_board_init.h based on feedback from Andrey Smirnov > > Changes v2 => v3 > v2 was posted in July - but I have lacked spare time until now > to give it a proper respin > - respin of all patches on top of v2017.12.0 > - fix bogus handling of at91sam926x_board_init > - Introduce new CONFIG symbol for at91sam926x_board_init to allow bisects > > Changes v1 => v2 > - converted all boards over > - fixed author info > Reviewed-by: Andrey Smirnov > > Sam Ravnborg (25): > arm: at91: refactor lowlevel_init selection > arm: at91: drop unused at91sam9x5_lowlevel_init.c > arm: at91: add at91sam926x_board_init.h > arm: at91: code cleanup in at91sam926x_board_init > at91sam9263ek: move reset vector to board code > at91sam9261ek, at91sam9g10ek: move reset vector to board code > pm9261: move reset vector to board code > at91: drop unused at91sam9261_lowlevel_init > pm9263: move reset vector to board code > usb-a926x: move reset vector to board code > mmccpu: delete unused lowlevel_init > mmccpu: move reset vector to board code > tny-a926x: delete unused tny_a9263_lowlevel_init.c > tny-a926x: move reset vector to board code > qil-a926x: move reset vector to board code > haba-knx: move reset vector to board code > sama5d{3,4}{xek,xplained}: move reset vector to board code > at91sam9n12ek: move reset vector to board code > at91sam9260ek, at91sam9g20ek: move reset vector to board code > at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code > animeo: move reset vector to board code > telit-evk-pro3: move reset vector to board code > dss11: move reset vector to board code > at91rm9200ek: move reset vector to board code > arm: at91: remove leftovers from moving reset code in mach-at91 > > > # git diff --stat=120 -M -C HEAD~36..HEAD~11 > # Note options above to let git track copies/renames > arch/arm/boards/animeo_ip/Makefile | 3 + > arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/animeo_ip/lowlevel.c} | 17 +++-- > arch/arm/boards/at91rm9200ek/Makefile | 3 + > .../at91rm9200_lowlevel_init.c => boards/at91rm9200ek/lowlevel.c} | 14 ++-- > arch/arm/boards/at91sam9260ek/Makefile | 3 + > .../{mach-at91/sama5d3_lowlevel_init.c => boards/at91sam9260ek/lowlevel.c} | 17 +++-- > arch/arm/boards/at91sam9261ek/Makefile | 2 +- > arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 +++++++--- > arch/arm/boards/at91sam9263ek/Makefile | 2 +- > arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++++++++--- > arch/arm/boards/at91sam9m10g45ek/Makefile | 3 + > .../at91sam9g45_lowlevel_init.c => boards/at91sam9m10g45ek/lowlevel.c} | 11 +-- > arch/arm/boards/at91sam9m10ihd/Makefile | 2 + > .../at91sam9x5_lowlevel_init.c => boards/at91sam9m10ihd/lowlevel.c} | 19 +++-- > arch/arm/boards/at91sam9n12ek/Makefile | 3 + > .../at91sam9n12_lowlevel_init.c => boards/at91sam9n12ek/lowlevel.c} | 13 ++-- > arch/arm/boards/dss11/Makefile | 2 + > arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/dss11/lowlevel.c} | 17 +++-- > arch/arm/boards/haba-knx/Makefile | 3 + > arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/haba-knx/lowlevel.c} | 17 +++-- > arch/arm/boards/mmccpu/Makefile | 2 +- > .../arm/{mach-at91/at91sam9n12_lowlevel_init.c => boards/mmccpu/lowlevel.c} | 19 +++-- > arch/arm/boards/mmccpu/lowlevel_init.c | 135 -------------------------------- > arch/arm/boards/pm9261/Makefile | 2 +- > arch/arm/boards/pm9261/lowlevel_init.c | 39 +++++++--- > arch/arm/boards/pm9263/Makefile | 2 +- > arch/arm/boards/pm9263/lowlevel_init.c | 43 ++++++++--- > arch/arm/boards/pm9g45/Makefile | 3 + > .../arm/{mach-at91/at91sam9g45_lowlevel_init.c => boards/pm9g45/lowlevel.c} | 13 ++-- > arch/arm/boards/qil-a926x/Makefile | 3 + > arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/qil-a926x/lowlevel.c} | 17 +++-- > arch/arm/boards/sama5d3_xplained/Makefile | 1 + > .../sama5d3_lowlevel_init.c => boards/sama5d3_xplained/lowlevel.c} | 10 +-- > arch/arm/boards/sama5d3xek/Makefile | 1 + > .../arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d3xek/lowlevel.c} | 10 +-- > arch/arm/boards/sama5d4_xplained/Makefile | 1 + > .../sama5d3_lowlevel_init.c => boards/sama5d4_xplained/lowlevel.c} | 10 +-- > arch/arm/boards/sama5d4ek/Makefile | 1 + > arch/arm/{mach-at91/sama5d3_lowlevel_init.c => boards/sama5d4ek/lowlevel.c} | 10 +-- > arch/arm/boards/telit-evk-pro3/Makefile | 2 + > .../{mach-at91/sama5d3_lowlevel_init.c => boards/telit-evk-pro3/lowlevel.c} | 17 +++-- > arch/arm/boards/tny-a926x/Makefile | 8 +- > .../sama5d3_lowlevel_init.c => boards/tny-a926x/tny_a9260_lowlevel.c} | 17 +++-- > .../at91sam9n12_lowlevel_init.c => boards/tny-a926x/tny_a9263_lowlevel.c} | 19 +++-- > arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c | 107 -------------------------- > arch/arm/boards/usb-a926x/Makefile | 8 +- > .../sama5d3_lowlevel_init.c => boards/usb-a926x/usb_a9260_lowlevel.c} | 17 +++-- > .../boards/usb-a926x/{usb_a9263_lowlevel_init.c => usb_a9263_lowlevel.c} | 43 ++++++++--- > arch/arm/mach-at91/Kconfig | 31 ++++---- > arch/arm/mach-at91/Makefile | 14 +--- > arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 48 ------------ > arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 48 ------------ > arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 48 ------------ > arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 46 ----------- > .../{at91sam926x_lowlevel_init.c => include/mach/at91sam926x_board_init.h} | 148 ++++++++++++++++-------------------- > 55 files changed, 422 insertions(+), 756 deletions(-) _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox