From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 8/8] mci: imx-esdhc: Add layerscape support
Date: Wed, 6 Feb 2019 17:02:37 -0800 [thread overview]
Message-ID: <CAHQ1cqHdBOn_pkzfuWVk6rVZjiUOgn3iBnNvcURsqe1TBjcXug@mail.gmail.com> (raw)
In-Reply-To: <20190206074921.11115-9-s.hauer@pengutronix.de>
On Tue, Feb 5, 2019 at 11:49 PM Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> This adds support for the esdhc controller found on Layerscape SoCs.
> This means adding the compatible and a driver data to access the
> controller in bigendian mode.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/mci/Kconfig | 2 +-
> drivers/mci/imx-esdhc.c | 11 +++++++++++
> 2 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
> index 954f957bc7..2075151d67 100644
> --- a/drivers/mci/Kconfig
> +++ b/drivers/mci/Kconfig
> @@ -82,7 +82,7 @@ config MCI_IMX
>
> config MCI_IMX_ESDHC
> bool "i.MX esdhc"
> - depends on ARCH_IMX
> + depends on ARCH_IMX || ARCH_LAYERSCAPE
> help
> Enable this entry to add support to read and write SD cards on a
> Freescale i.MX25/35/51 based system.
> diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
> index 58c262782f..10c981ad5d 100644
> --- a/drivers/mci/imx-esdhc.c
> +++ b/drivers/mci/imx-esdhc.c
> @@ -69,6 +69,8 @@
> #define ESDHC_FLAG_HAVE_CAP1 BIT(6)
> /* Need to access registers in bigendian mode */
> #define ESDHC_FLAG_BIGENDIAN BIT(7)
> +/* Enable cache snooping */
> +#define ESDHC_FLAG_CACHE_SNOOPING BIT(8)
>
> /*
> * The IP has errata ERR004536
> @@ -612,6 +614,10 @@ static int esdhc_init(struct mci_host *mci, struct device_d *dev)
> /* RSTA doesn't reset MMC_BOOT register, so manually reset it */
> esdhc_write32(host, SDHCI_MMC_BOOT, 0);
>
> + /* Enable cache snooping */
> + if (host->socdata->flags & ESDHC_FLAG_CACHE_SNOOPING)
> + esdhc_write32(host, 0x40c, 0x40);
I think importing ESDHC_DMA_SYSCTL and ESDHC_DMA_SNOOP from Linux and
using them instead of magic number would improve readability. Also,
should this be esdhc_setbits32() instead esdhc_write32() to avoid
clearing other, unrelated, bits?
> +
> /* Set the initial clock speed */
> set_sysctl(mci, 400000);
>
> @@ -747,6 +753,10 @@ static struct esdhc_soc_data usdhc_imx6sx_data = {
> .clkidx = "per",
> };
>
> +static struct esdhc_soc_data esdhc_ls_data = {
> + .flags = ESDHC_FLAG_MULTIBLK_NO_INT | ESDHC_FLAG_BIGENDIAN,
> +};
> +
> static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
> { .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data },
> { .compatible = "fsl,imx50-esdhc", .data = &esdhc_imx53_data },
> @@ -756,6 +766,7 @@ static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
> { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data },
> { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data },
> { .compatible = "fsl,imx8mq-usdhc", .data = &usdhc_imx6sx_data },
> + { .compatible = "fsl,ls1046a-esdhc",.data = &esdhc_ls_data },
> { /* sentinel */ }
> };
>
> --
> 2.20.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-02-07 1:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-06 7:49 [PATCH 0/8] MMC: esdhc: Add Layerscape support Sascha Hauer
2019-02-06 7:49 ` [PATCH 1/8] mci: imx-esdhc: Do not reset twice Sascha Hauer
2019-02-06 7:49 ` [PATCH 2/8] mci: imx-esdhc: use dev_id Sascha Hauer
2019-02-06 7:49 ` [PATCH 3/8] mci: imx-esdhc: move platform_data Sascha Hauer
2019-02-06 7:49 ` [PATCH 4/8] mci: imx-esdhc: make clkidx configurable Sascha Hauer
2019-02-06 7:49 ` [PATCH 5/8] mci: imx-esdhc: remove unnecessary include Sascha Hauer
2019-02-06 7:49 ` [PATCH 6/8] mci: imx-esdhc: implement static inline io wrappers Sascha Hauer
2019-02-07 0:55 ` Andrey Smirnov
2019-02-07 7:56 ` Sascha Hauer
2019-02-06 7:49 ` [PATCH 7/8] mci: imx-esdhc: Add bigendian register access support Sascha Hauer
2019-02-06 7:49 ` [PATCH 8/8] mci: imx-esdhc: Add layerscape support Sascha Hauer
2019-02-07 1:02 ` Andrey Smirnov [this message]
2019-02-12 8:42 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHQ1cqHdBOn_pkzfuWVk6rVZjiUOgn3iBnNvcURsqe1TBjcXug@mail.gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox