Re: openrisc build problem

[Franck Jullien <franck.jullien@gmail.com>]

2015-02-08 20:26 GMT+01:00 Antony Pavlov <antonynpavlov@gmail.com>:
> Hi Franck !
>
> Here is sample openrisc barebox build error log :
>
>     /opt/gcc-or1k-elf-4.8.1-x86_64/bin/or1k-elf-ld  -Map barebox.map -o
>     barebox -T arch/openrisc/cpu/barebox.lds --start-group
>     common/built-in.o  drivers/built-in.o  commands/built-in.o
>     lib/built-in.o  crypto/built-in.o  net/built-in.o  fs/built-in.o
>     arch/openrisc/boards/generic/built-in.o  arch/openrisc/lib/built-in.o
>     arch/openrisc/cpu/built-in.o  arch/openrisc/dts/built-in.o
>     defaultenv/built-in.o --end-group
>     /opt/gcc-or1k-elf-4.8.1-x86_64/bin/or1k-elf-ld: target elf32-or32 not found
>
>     $ /opt/gcc-or1k-elf-4.8.1-x86_64/bin/or1k-elf-ld --version
>     GNU ld (GNU Binutils) 2.23.51.20121129
>     Copyright 2012 Free Software Foundation, Inc.
>     This program is free software; you may redistribute it under the terms
>     of the GNU General Public License version 3 or (at your option) a later
>     version.
>     This program has absolutely no warranty.
>
>
> My current quick-and-dirty solution is :
>
> --- a/arch/openrisc/cpu/barebox.lds.S
> +++ b/arch/openrisc/cpu/barebox.lds.S
> @@ -16,7 +16,7 @@
>  #include <config.h>
>  #include <asm-generic/barebox.lds.h>
>
> -OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
> +/* OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32") */
>  __DYNAMIC  =  0;
>
>  MEMORY
>
>
> Franck !
> Please comment this message !
>
> --
> Best regards,
>   Antony Pavlov

Hi,

Yes I know :) Until now, the official openrisc toolchain was called or32.
However, the new one (and maintained one)  is called or1k. So we need
to change "elf32-or32" to "elf32-or1k" in barebox.lds.S.

Feel free to send a patch. Or I'll do that later.

Franck.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox