From: Igor Trevisan <igt1972@gmail.com>
To: barebox@lists.infradead.org
Subject: iMX27 clock settings
Date: Tue, 14 Feb 2012 16:10:08 +0100 [thread overview]
Message-ID: <CALQ+5adUP4qyf8+82s2NK6R3LbvjteuE-bkQ0iUdMG7X2LtxFQ@mail.gmail.com> (raw)
Hi,
I'm working on a custom board based on iMX27L. Initially I worked with Redboot
as Linux bootloader but now, I'm happily working with Barebox (2012.01.0)
having replaced Redboot with it.
Everithing is fine (thanks to the guys in the list for helping me!) but...
I noticed that my Linux apps run more slowly within my system if it's
started by Barebox
then if it's started by Redbbot.
I think it's a matter of internal clocks settings.
I see that Redboot, for example, set:
CSR=0x33F38107
while Barebox does:
writel(0x33F30307 | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART, CSCR)
That brings to CSR=0x33F30307 at the end of the PLLs restart procedure.
Reading the Manual I can see that the differences between the two settings
mean having an arm_clk that is 2/3 and an AHB_clk that's the half.
Is there a particular reason for having these "slower configuration"?
I tried to change the lowlevel_init.S to force 0x33F38107 into CSCR
at startup but, after that change, my board starts, has time to write
somenthing on the
serial console:
"barebox 2012.01.0-svn11070-dirty1 (Feb 14 2012 - 11:10:39)
Board: Freescale iÿ"
and then restarts... continuously.
Can anybody help me to understand this and to make (if possible) my
system faster?
Thanks in advance,
Igor
--
"Don't find fault, find a remedy."
(Henry Ford)
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-02-14 15:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-14 15:10 Igor Trevisan [this message]
2012-02-15 9:15 ` Kamel BOUHARA
2012-02-15 11:10 ` Igor Trevisan
2012-02-15 9:29 ` Juergen Beisert
2012-02-15 12:09 ` Sascha Hauer
2012-02-15 14:59 ` Igor Trevisan
2012-02-15 16:06 ` Igor Trevisan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALQ+5adUP4qyf8+82s2NK6R3LbvjteuE-bkQ0iUdMG7X2LtxFQ@mail.gmail.com \
--to=igt1972@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox