From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-lpp01m020-f177.google.com ([209.85.217.177]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1RwryE-0003kd-Ep for barebox@lists.infradead.org; Mon, 13 Feb 2012 09:13:15 +0000 Received: by lbon10 with SMTP id n10so2849287lbo.36 for ; Mon, 13 Feb 2012 01:13:11 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <20120210225915.GM3852@pengutronix.de> References: <20120131114045.GO1990@pengutronix.de> <20120131131256.GP1990@pengutronix.de> <20120210225915.GM3852@pengutronix.de> From: Igor Trevisan Date: Mon, 13 Feb 2012 10:12:51 +0100 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: IIM on iMX27 "how-to" needed To: barebox@lists.infradead.org Hi, >> > Which is the right way to write the fuse bits? > > Try > > mw -d /dev/imx_iim_bank0 -b 0x2 0x80 > > to change the the '0x80' at offset 2 to 0x80. it (obviously...) works! > I suggest that you explore the usage of 'mw' with something less > sensitive than the fuses, they have the potential to brick your board... Oh yes, I did experiments on ram0 before killing my uC! ;-) By the way... Thanks a lot for your support Sascha. I. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox