Im trying to port barebox to my Armadeus apf27 board (based on the Freescale imx27 with a 512MiB NAND and 1GB of SDRAM).

I've first tried the phytec imx27 configuration and I got it worked until the Linux uncompressing task (the machine ID is bad so I didn't expect it will boot fine :)).

So I just copied the phycard-imx27 board directory and I followed the boards.dox in order to add support for my board.

But when I've tried to boot again it was not working anymore ...

There are somethings stranges with the FEC, here is the result of a memory display with both phytec and my own board :

barebox@Phytec phyCard-i.MX27:/ md -s /dev/phy0

00000000: ffffffff ffffffff ffffffff ffffffff ................

00000010: ffffffff ffffffff ffffffff ffffffff ................

00000020: ffffffff ffffffff ffffffff ffffffff ................

00000030: ffffffff ffffffff ffffffff ffffffff ................

barebox@Phytec phyCard-i.MX27:/ boto

Unknown command 'boto' - try 'help'

barebox@Phytec phyCard-i.MX27:/ boot

phy0: Link is up - 100/Full

T T T T T

The fec is working fine on the phytec but the same o my board make it crash:

barebox@armadeus APF27:/ md -s /dev/phy0

00000000: 78091000 c0c40007 000101e1 ffff0000 ...x............

00000010: ffffffff ffffffff ffffffff 0000ffff ................

00000020: 00000040 ffff00ff 00000000 00000000 @...............

00000030: ffffffff 00010000 00100000 00400000 ..............@.

Why I did'nt get the boad working with the same configuration ?

Regards.

__________________________________
Kamel BOUHARA

7 rue Jules César

02100 SAINT-QUENTIN
06.17.83.29.04