Hello, Sorry for the pm but I still wait the bellow message to be approved by the mailing list admin and it seems he takes a week ;). Can you please look at it. Le 23 mars 2012 19:17, Kamel BOUHARA a écrit : > Hi Juergen, > > Ok, it light me on the way that my board don't use an eeprom to set the > FEC address so I probably have to fix that somewhere ...maybe a macro > #define NO_EEPROM or something like that ?? > > Can you, please, show me the *md -s /dev/phy0* command output from you > mini6410. > > Thanks. > > ---------- Message transféré ---------- > De : Juergen Beisert > Date : 23 mars 2012 09:22 > Objet : Re: Network Issue with Mini2440 > À : barebox@lists.infradead.org > Cc : Kamel BOUHARA > > > > Hi Kamel, > > Kamel BOUHARA wrote: > > I'm trying to port the last release of barebox to my sbc2440-III board > with > > the base config. of a mini2440 but unfortunately I'm facing a network > issue > > when trying to boot from nfs or to load files with tftp. > > > > After checking all the parameters (pll, ram init etc.) I figured out that > > the chip select and interrupt pinout were not good and I changed them to > > fit with my board schematic. > > So I have a well boot on barebox everything seems to work as you can see > > here : > > [...] > > I changes the DM9000 driver recently. So, I tested both DM9000 revisions I > have access to (based on the Barebox's next branch). > > First on the Mini2440. It comes with a DM9000E: > > --------------------------------------------------------------------------- > > mini2440:/ tftp barebox-mini2440 /dev/ram0 > TFTP from server 192.168.1.7 ('barebox-mini2440' -> '/dev/ram0') > ################################# > mini2440:/ go /dev/ram0 > ## Starting application at 0x30000000 ... > > barebox 2012.02.0-00259-g773e35b (Mar 23 2012 - 08:53:16) > > Board: Mini 2440 > NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB > 3,3V 8-bit) > Bad block table found at page 65472, version 0x01 > Bad block table found at page 65408, version 0x01 > nand_read_bbt: Bad block at 0x019e0000 > nand_read_bbt: Bad block at 0x02540000 > dm9000@dm90000: Found DM9000E at i/o: 0x20000300 > s3c_mci@mci0: registered as mci0 > refclk: 12000 kHz > mpll: 405000 kHz > upll: 48000 kHz > fclk: 405000 kHz > hclk: 101250 kHz > pclk: 50625 kHz > SDRAM1: CL2@101MHz > Malloc space: 0x33a00000 -> 0x33dfffff (size 4 MB) > Stack space : 0x339f8000 -> 0x33a00000 (size 32 kB) > envfs: wrong magic on /dev/env0 > no valid environment found on /dev/env0. Using default environment > running /env/bin/init... > > Hit any key to stop autoboot: 3 > mini2440:/ devinfo eth0 > resources: > driver: none > > Parameters: > ipaddr = 192.168.1.241 > ethaddr = 36:CF:EC:0D:18:Bd > gateway = > netmask = 255.255.255.0 > serverip = 192.168.1.7 > mini2440:/ ping 192.168.1.7 > phy0: Link is up - 100/Full > host 192.168.1.7 is alive > > --------------------------------------------------------------------------- > > And here with my Mini6410. This comes with a DM9000A like your system. > > --------------------------------------------------------------------------- > > barebox 2012.02.0-00259-g773e35b-dirty (Mar 23 2012 - 09:19:48) > > Board: Mini 6410 > Will write 0x00021300 > dm9000@dm90000: Found DM9000A at i/o: 0x18000300 > eth@eth0: got MAC address from EEPROM: 08:90:90:90:90:90 > refclk: 12000 kHz > apll: 532000 kHz > mpll: 532000 kHz > CPU: 532000 kHz > hclkx2: 266000 kHz > hclk: 133000 kHz > pclk: 66500 kHz > Malloc space: 0x57bc0000 -> 0x57fbffff (size 4 MB) > Stack space : 0x57bb8000 -> 0x57bc0000 (size 32 kB) > Open /dev/env0 No such file or directory > no valid environment found on /dev/env0. Using default environment > running /env/bin/init... > > Hit any key to stop autoboot: 3 > mini6410:/ devinfo eth0 > resources: > driver: none > > Parameters: > ipaddr = 192.168.1.187 > ethaddr = 08:90:90:90:90:90 > gateway = 192.168.1.1 > netmask = 255.255.255.0 > serverip = 192.168.1.7 > mini6410:/ ping 192.168.1.7 > phy0: Link is up - 100/Full > host 192.168.1.7 is alive > > --------------------------------------------------------------------------- > > Regards, > Juergen > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | http://www.pengutronix.de/ | > > > > -- > > _______________________________ > *Kamel BOUHARA* > 62 Bis Rue Carnot > 60610 Lacroix Saint-Ouen > > Tel : +33617832904 > > > -- _______________________________ *Kamel BOUHARA* 62 Bis Rue Carnot 60610 Lacroix Saint-Ouen Tel : +33617832904