From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: John Watts <contact@jookia.org>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
Date: Sun, 22 Jan 2023 20:06:04 +0300 [thread overview]
Message-ID: <CAP1tNvQgZhoevYT4DQAZ_H0C_PPQ54irZU=jdHo09uZqigmvmg@mail.gmail.com> (raw)
In-Reply-To: <20230122150432.4096816-1-contact@jookia.org>
Hello.
These lines can be defined as a regular function like
get_cs_gpio_cound(node), isn't it?
вс, 22 янв. 2023 г. в 18:06, John Watts <contact@jookia.org>:
>
> of_gpio_named_count returns a negative value on error but this
> is discarded and cast to a u16, making error handling impossible.
>
> With debug logging enabled this effectively halts booting so the board can
> print an error over serial 65534 times.
>
> Check for this error and proceed as if there are no gpios specified.
>
> Signed-off-by: John Watts <contact@jookia.org>
> ---
> drivers/spi/atmel_spi.c | 8 +++++++-
> drivers/spi/imx_spi.c | 8 +++++++-
> drivers/spi/stm32_spi.c | 8 +++++++-
> 3 files changed, 21 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
> index ec90330e53..a2314be8ee 100644
> --- a/drivers/spi/atmel_spi.c
> +++ b/drivers/spi/atmel_spi.c
> @@ -388,6 +388,7 @@ static int atmel_spi_probe(struct device_d *dev)
> struct resource *iores;
> int ret = 0;
> int i;
> + int num_gpios;
> struct spi_master *master;
> struct device_node *node = dev->device_node;
> struct atmel_spi *as;
> @@ -408,7 +409,12 @@ static int atmel_spi_probe(struct device_d *dev)
> master->num_chipselect = pdata->num_chipselect;
> as->cs_pins = pdata->chipselect;
> } else {
> - master->num_chipselect = of_gpio_named_count(node, "cs-gpios");
> + num_gpios = of_gpio_named_count(node, "cs-gpios");
> + if (num_gpios < 0) {
> + num_gpios = 0;
> + }
> +
> + master->num_chipselect = num_gpios;
> as->cs_pins = xzalloc(sizeof(u32) * master->num_chipselect);
>
> for (i = 0; i < master->num_chipselect; i++) {
> diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
> index 3e0ad2db00..b10076639a 100644
> --- a/drivers/spi/imx_spi.c
> +++ b/drivers/spi/imx_spi.c
> @@ -564,11 +564,17 @@ static int imx_spi_dt_probe(struct imx_spi *imx)
> {
> struct device_node *node = imx->master.dev->device_node;
> int i;
> + int num_gpios;
>
> if (!node)
> return -ENODEV;
>
> - imx->master.num_chipselect = of_gpio_named_count(node, "cs-gpios");
> + num_gpios = of_gpio_named_count(node, "cs-gpios");
> + if (num_gpios < 0) {
> + num_gpios = 0;
> + }
> +
> + imx->master.num_chipselect = num_gpios;
> imx->cs_array = xzalloc(sizeof(u32) * imx->master.num_chipselect);
>
> for (i = 0; i < imx->master.num_chipselect; i++)
> diff --git a/drivers/spi/stm32_spi.c b/drivers/spi/stm32_spi.c
> index 639c4f1740..a34e0b143d 100644
> --- a/drivers/spi/stm32_spi.c
> +++ b/drivers/spi/stm32_spi.c
> @@ -513,8 +513,14 @@ static void stm32_spi_dt_probe(struct stm32_spi_priv *priv)
> {
> struct device_node *node = priv->master.dev->device_node;
> int i;
> + int num_gpios;
>
> - priv->master.num_chipselect = of_gpio_named_count(node, "cs-gpios");
> + num_gpios = of_gpio_named_count(node, "cs-gpios");
> + if (num_gpios < 0) {
> + num_gpios = 0;
> + }
> +
> + priv->master.num_chipselect = num_gpios;
> priv->cs_gpios = xzalloc(sizeof(u32) * priv->master.num_chipselect);
>
> for (i = 0; i < priv->master.num_chipselect; i++)
> --
> 2.39.0
>
>
next prev parent reply other threads:[~2023-01-22 17:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-22 15:04 John Watts
2023-01-22 17:06 ` Alexander Shiyan [this message]
2023-01-22 17:13 ` John Watts
2023-01-22 18:09 ` Alexander Shiyan
2023-01-22 18:19 ` John Watts
2023-01-23 8:43 ` Sascha Hauer
2023-01-23 9:47 ` John Watts
2023-01-24 20:05 ` [PATCH v2] spi: Fix probing SPI drivers with no cs-gpios John Watts
2023-01-26 8:14 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAP1tNvQgZhoevYT4DQAZ_H0C_PPQ54irZU=jdHo09uZqigmvmg@mail.gmail.com' \
--to=eagle.alexander923@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=contact@jookia.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox