From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] i2c: stm32: Update driver
Date: Thu, 3 Aug 2023 13:46:31 +0300 [thread overview]
Message-ID: <CAP1tNvS7KqMUHNuvYm7YeJka_7iTNnrGHjec17sj-FZtqURigg@mail.gmail.com> (raw)
In-Reply-To: <a8456e48-fa53-a118-0fb4-08de1cafbcde@pengutronix.de>
No, I'm using stm32mp15x.
It's just a compatibility string that might help someone else to get
stm32mp13x running.
чт, 3 авг. 2023 г. в 13:39, Ahmad Fatoum <a.fatoum@pengutronix.de>:
>
> Hello Alexander,
>
> On 28.07.23 12:23, Alexander Shiyan wrote:
> > This patch updates the stm32 i2c driver. The original source is taken from
> > the STMicroelectronics/u-boot repository [1].
> > As a bonus from the update, the i2c_probe command now works properly,
> > added support for stm32mp13x CPUs and a parser for some stm32-specific
> > i2c devicetree properties.
>
> Are you using this on STM32MP13x? I am asking because support for the new SoC
> is still rudimentary and if you are going to add support for it, we might have
> some patches internally that could make it easier (OP-TEE integration).
>
> Cheers,
> Ahmad
>
> >
> > [1] https://github.com/STMicroelectronics/u-boot/blob/v2022.10-stm32mp/drivers/i2c/stm32f7_i2c.c
> >
> > Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> > ---
> > drivers/i2c/busses/i2c-stm32.c | 442 +++++++++++++++++++++------------
> > 1 file changed, 277 insertions(+), 165 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
> > index 39e345e2cc..ba0d4a51b5 100644
> > --- a/drivers/i2c/busses/i2c-stm32.c
> > +++ b/drivers/i2c/busses/i2c-stm32.c
> > @@ -9,9 +9,11 @@
> > #include <common.h>
> > #include <i2c/i2c.h>
> > #include <init.h>
> > +#include <regmap.h>
> > #include <linux/clk.h>
> > #include <linux/iopoll.h>
> > #include <linux/reset.h>
> > +#include <mfd/syscon.h>
> >
> > /* STM32 I2C registers */
> > struct __packed stm32_i2c_regs {
> > @@ -38,6 +40,8 @@ struct __packed stm32_i2c_regs {
> >
> > /* STM32 I2C control 1 */
> > #define STM32_I2C_CR1_ANFOFF BIT(12)
> > +#define STM32_I2C_CR1_DNF_MASK GENMASK(11, 8)
> > +#define STM32_I2C_CR1_DNF(n) (((n) & 0xf) << 8)
> > #define STM32_I2C_CR1_ERRIE BIT(7)
> > #define STM32_I2C_CR1_TCIE BIT(6)
> > #define STM32_I2C_CR1_STOPIE BIT(5)
> > @@ -48,7 +52,6 @@ struct __packed stm32_i2c_regs {
> > #define STM32_I2C_CR1_PE BIT(0)
> >
> > /* STM32 I2C control 2 */
> > -#define STM32_I2C_CR2_AUTOEND BIT(25)
> > #define STM32_I2C_CR2_RELOAD BIT(24)
> > #define STM32_I2C_CR2_NBYTES_MASK GENMASK(23, 16)
> > #define STM32_I2C_CR2_NBYTES(n) ((n & 0xff) << 16)
> > @@ -98,10 +101,8 @@ struct __packed stm32_i2c_regs {
> >
> > #define STM32_I2C_MAX_LEN 0xff
> >
> > -#define STM32_I2C_DNF_DEFAULT 0
> > -#define STM32_I2C_DNF_MAX 16
> > +#define STM32_I2C_DNF_MAX 15
> >
> > -#define STM32_I2C_ANALOG_FILTER_ENABLE 1
> > #define STM32_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
> > #define STM32_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
> >
> > @@ -119,10 +120,9 @@ struct __packed stm32_i2c_regs {
> > #define FAST_PLUS_RATE 1000000
> >
> > enum stm32_i2c_speed {
> > - STM32_I2C_SPEED_STANDARD, /* 100 kHz */
> > - STM32_I2C_SPEED_FAST, /* 400 kHz */
> > - STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */
> > - STM32_I2C_SPEED_END,
> > + IC_SPEED_MODE_STANDARD,
> > + IC_SPEED_MODE_FAST,
> > + IC_SPEED_MODE_FAST_PLUS,
> > };
> >
> > /**
> > @@ -154,20 +154,23 @@ struct stm32_i2c_spec {
> >
> > /**
> > * struct stm32_i2c_setup - private I2C timing setup parameters
> > - * @speed: I2C speed mode (standard, Fast Plus)
> > - * @speed_freq: actual I2C speed frequency (Hz)
> > * @clock_src: I2C clock source frequency (Hz)
> > - * @dnf: Digital filter coefficient (0-16)
> > + * @timings: I2C timing information
> > * @analog_filter: Analog filter delay (On/Off)
> > - * @timings: I2C timings parameters
> > */
> > struct stm32_i2c_setup {
> > - enum stm32_i2c_speed speed;
> > - u32 speed_freq;
> > u32 clock_src;
> > + struct i2c_timings timings;
> > u8 dnf;
> > bool analog_filter;
> > - struct i2c_timings timings;
> > +};
> > +
> > +/**
> > + * struct stm32_i2c_data - driver data for I2C configuration by compatible
> > + * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
> > + */
> > +struct stm32_i2c_data {
> > + u32 fmp_clr_offset;
> > };
> >
> > /**
> > @@ -187,8 +190,32 @@ struct stm32_i2c_timings {
> > u8 scll;
> > };
> >
> > +/**
> > + * struct stm32_i2c_priv - private data of the controller
> > + * @regs: I2C registers address
> > + * @clk: hw i2c clock
> > + * @setup: I2C timing setup parameters
> > + * @speed: I2C clock frequency of the controller. Standard, Fast or Fast+
> > + * @regmap: holds SYSCFG phandle for Fast Mode Plus bit
> > + * @regmap_sreg: register address for setting Fast Mode Plus bits
> > + * @regmap_creg: register address for clearing Fast Mode Plus bits
> > + * @regmap_mask: mask for Fast Mode Plus bits
> > + */
> > +struct stm32_i2c_priv {
> > + struct stm32_i2c_regs __iomem *regs;
> > + struct clk *clk;
> > + struct i2c_adapter adapter;
> > + struct stm32_i2c_setup setup;
> > + u32 speed;
> > + struct regmap *regmap;
> > + u32 regmap_sreg;
> > + u32 regmap_creg;
> > + u32 regmap_mask;
> > +};
> > +
> > static const struct stm32_i2c_spec i2c_specs[] = {
> > - [STM32_I2C_SPEED_STANDARD] = {
> > + /* Standard speed - 100 KHz */
> > + [IC_SPEED_MODE_STANDARD] = {
> > .rate = STANDARD_RATE,
> > .rate_min = 8000,
> > .rate_max = 120000,
> > @@ -200,7 +227,8 @@ static const struct stm32_i2c_spec i2c_specs[] = {
> > .l_min = 4700,
> > .h_min = 4000,
> > },
> > - [STM32_I2C_SPEED_FAST] = {
> > + /* Fast speed - 400 KHz */
> > + [IC_SPEED_MODE_FAST] = {
> > .rate = FAST_RATE,
> > .rate_min = 320000,
> > .rate_max = 480000,
> > @@ -212,7 +240,8 @@ static const struct stm32_i2c_spec i2c_specs[] = {
> > .l_min = 1300,
> > .h_min = 600,
> > },
> > - [STM32_I2C_SPEED_FAST_PLUS] = {
> > + /* Fast Plus Speed - 1 MHz */
> > + [IC_SPEED_MODE_FAST_PLUS] = {
> > .rate = FAST_PLUS_RATE,
> > .rate_min = 800000,
> > .rate_max = 1200000,
> > @@ -226,22 +255,30 @@ static const struct stm32_i2c_spec i2c_specs[] = {
> > },
> > };
> >
> > -struct stm32_i2c {
> > - struct stm32_i2c_regs __iomem *regs;
> > - struct clk *clk;
> > - struct i2c_adapter adapter;
> > - struct stm32_i2c_setup setup;
> > +static const struct stm32_i2c_data stm32f7_data = {
> > + .fmp_clr_offset = 0x00,
> > +};
> > +
> > +static const struct stm32_i2c_data stm32mp15_data = {
> > + .fmp_clr_offset = 0x40,
> > +};
> > +
> > +static const struct stm32_i2c_data stm32mp13_data = {
> > + .fmp_clr_offset = 0x4,
> > };
> > -#define to_stm32_i2c(a) container_of(a, struct stm32_i2c, adapter)
> >
> > -static inline int stm32_i2c_check_device_busy(struct stm32_i2c *priv)
> > +static inline int stm32_i2c_check_device_busy(struct stm32_i2c_priv *priv)
> > {
> > u32 status = readl(&priv->regs->isr);
> > - return status & STM32_I2C_ISR_BUSY;
> > +
> > + if (status & STM32_I2C_ISR_BUSY)
> > + return -EBUSY;
> > +
> > + return 0;
> > }
> >
> > -static void stm32_i2c_message_start(struct stm32_i2c *i2c_priv,
> > - struct i2c_msg *msg, bool stop)
> > +static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv,
> > + struct i2c_msg *msg)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > u32 cr2 = readl(®s->cr2);
> > @@ -262,9 +299,8 @@ static void stm32_i2c_message_start(struct stm32_i2c *i2c_priv,
> > cr2 |= STM32_I2C_CR2_SADD7(msg->addr);
> > }
> >
> > - /* Set nb bytes to transfer and reload or autoend bits */
> > - cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD |
> > - STM32_I2C_CR2_AUTOEND);
> > + /* Set nb bytes to transfer and reload (if needed) */
> > + cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD);
> > if (msg->len > STM32_I2C_MAX_LEN) {
> > cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN);
> > cr2 |= STM32_I2C_CR2_RELOAD;
> > @@ -284,8 +320,8 @@ static void stm32_i2c_message_start(struct stm32_i2c *i2c_priv,
> > * sent is greater than MAX_LEN
> > */
> >
> > -static void stm32_i2c_handle_reload(struct stm32_i2c *i2c_priv,
> > - struct i2c_msg *msg, bool stop)
> > +static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv,
> > + struct i2c_msg *msg)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > u32 cr2 = readl(®s->cr2);
> > @@ -302,7 +338,7 @@ static void stm32_i2c_handle_reload(struct stm32_i2c *i2c_priv,
> > writel(cr2, ®s->cr2);
> > }
> >
> > -static int stm32_i2c_wait_flags(struct stm32_i2c *i2c_priv,
> > +static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv,
> > u32 flags, u32 *status)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > @@ -311,7 +347,7 @@ static int stm32_i2c_wait_flags(struct stm32_i2c *i2c_priv,
> > *status & flags, USEC_PER_SEC);
> > }
> >
> > -static int stm32_i2c_check_end_of_message(struct stm32_i2c *i2c_priv)
> > +static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > u32 mask = STM32_I2C_ISR_ERRORS | STM32_I2C_ISR_NACKF |
> > @@ -362,30 +398,29 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c *i2c_priv)
> > setbits_le32(®s->icr, STM32_I2C_ICR_STOPCF);
> >
> > /* Clear control register 2 */
> > - setbits_le32(®s->cr2, STM32_I2C_CR2_RESET_MASK);
> > + clrbits_le32(®s->cr2, STM32_I2C_CR2_RESET_MASK);
> > }
> >
> > return ret;
> > }
> >
> > -static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv,
> > +static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv,
> > struct i2c_msg *msg, bool stop)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > - int len = msg->len;
> > - u8 *buf = msg->buf;
> > u32 status;
> > u32 mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE :
> > STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF;
> > - int bytes_to_rw = min(len, STM32_I2C_MAX_LEN);
> > + int bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ?
> > + STM32_I2C_MAX_LEN : msg->len;
> > int ret = 0;
> >
> > /* Add errors */
> > mask |= STM32_I2C_ISR_ERRORS;
> >
> > - stm32_i2c_message_start(i2c_priv, msg, stop);
> > + stm32_i2c_message_start(i2c_priv, msg);
> >
> > - while (len) {
> > + while (msg->len) {
> > /*
> > * Wait until TXIS/NACKF/BERR/ARLO flags or
> > * RXNE/BERR/ARLO flags are set
> > @@ -398,29 +433,30 @@ static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv,
> > break;
> >
> > if (status & STM32_I2C_ISR_RXNE) {
> > - *buf++ = readb(®s->rxdr);
> > - len--;
> > + *msg->buf++ = readb(®s->rxdr);
> > + msg->len--;
> > bytes_to_rw--;
> > }
> >
> > if (status & STM32_I2C_ISR_TXIS) {
> > - writeb(*buf++, ®s->txdr);
> > - len--;
> > + writeb(*msg->buf++, ®s->txdr);
> > + msg->len--;
> > bytes_to_rw--;
> > }
> >
> > - if (!bytes_to_rw && len) {
> > + if (!bytes_to_rw && msg->len) {
> > /* Wait until TCR flag is set */
> > mask = STM32_I2C_ISR_TCR;
> > ret = stm32_i2c_wait_flags(i2c_priv, mask, &status);
> > if (ret)
> > break;
> >
> > - bytes_to_rw = min(len, STM32_I2C_MAX_LEN);
> > + bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ?
> > + STM32_I2C_MAX_LEN : msg->len;
> > mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE :
> > STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF;
> >
> > - stm32_i2c_handle_reload(i2c_priv, msg, stop);
> > + stm32_i2c_handle_reload(i2c_priv, msg);
> > } else if (!bytes_to_rw) {
> > /* Wait until TC flag is set */
> > mask = STM32_I2C_ISR_TC;
> > @@ -434,9 +470,9 @@ static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv,
> > }
> > }
> >
> > - /* End of transfer, send stop condition */
> > - mask = STM32_I2C_CR2_STOP;
> > - setbits_le32(®s->cr2, mask);
> > + /* End of transfer, send stop condition if appropriate */
> > + if (!ret && !(status & (STM32_I2C_ISR_NACKF | STM32_I2C_ISR_ERRORS)))
> > + setbits_le32(®s->cr2, STM32_I2C_CR2_STOP);
> >
> > return stm32_i2c_check_end_of_message(i2c_priv);
> > }
> > @@ -444,16 +480,16 @@ static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv,
> > static int stm32_i2c_xfer(struct i2c_adapter *adapter,
> > struct i2c_msg *msg, int nmsgs)
> > {
> > - struct stm32_i2c *i2c_priv = to_stm32_i2c(adapter);
> > - int ret;
> > - int i;
> > + struct stm32_i2c_priv *i2c_priv =
> > + container_of(adapter, struct stm32_i2c_priv, adapter);
> > + int i, ret;
> >
> > ret = stm32_i2c_check_device_busy(i2c_priv);
> > if (ret)
> > - return -EBUSY;
> > + return ret;
> >
> > - for (i = 0; i < nmsgs; i++) {
> > - ret = stm32_i2c_message_xfer(i2c_priv, &msg[i], i == nmsgs - 1);
> > + for (i = nmsgs; i > 0; i--, msg++) {
> > + ret = stm32_i2c_message_xfer(i2c_priv, msg, i == 1);
> > if (ret)
> > return ret;
> > }
> > @@ -461,30 +497,30 @@ static int stm32_i2c_xfer(struct i2c_adapter *adapter,
> > return nmsgs;
> > }
> >
> > -
> > -static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup,
> > +static int stm32_i2c_compute_solutions(u32 i2cclk,
> > + struct stm32_i2c_setup *setup,
> > + const struct stm32_i2c_spec *specs,
> > struct list_head *solutions)
> > {
> > struct stm32_i2c_timings *v;
> > u32 p_prev = STM32_PRESC_MAX;
> > - u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src);
> > - u32 af_delay_min = 0, af_delay_max = 0;
> > + u32 af_delay_min, af_delay_max;
> > u16 p, l, a;
> > int sdadel_min, sdadel_max, scldel_min;
> > int ret = 0;
> >
> > - if (setup->analog_filter) {
> > - af_delay_min = STM32_I2C_ANALOG_FILTER_DELAY_MIN;
> > - af_delay_max = STM32_I2C_ANALOG_FILTER_DELAY_MAX;
> > - }
> > + af_delay_min = setup->analog_filter ?
> > + STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0;
> > + af_delay_max = setup->analog_filter ?
> > + STM32_I2C_ANALOG_FILTER_DELAY_MAX : 0;
> >
> > - sdadel_min = i2c_specs[setup->speed].hddat_min + setup->timings.scl_fall_ns -
> > + sdadel_min = specs->hddat_min + setup->timings.scl_fall_ns -
> > af_delay_min - (setup->dnf + 3) * i2cclk;
> >
> > - sdadel_max = i2c_specs[setup->speed].vddat_max - setup->timings.scl_rise_ns -
> > + sdadel_max = specs->vddat_max - setup->timings.scl_rise_ns -
> > af_delay_max - (setup->dnf + 4) * i2cclk;
> >
> > - scldel_min = setup->timings.scl_rise_ns + i2c_specs[setup->speed].sudat_min;
> > + scldel_min = setup->timings.scl_rise_ns + specs->sudat_min;
> >
> > if (sdadel_min < 0)
> > sdadel_min = 0;
> > @@ -497,13 +533,13 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup,
> > /* Compute possible values for PRESC, SCLDEL and SDADEL */
> > for (p = 0; p < STM32_PRESC_MAX; p++) {
> > for (l = 0; l < STM32_SCLDEL_MAX; l++) {
> > - u32 scldel = (l + 1) * (p + 1) * i2cclk;
> > + int scldel = (l + 1) * (p + 1) * i2cclk;
> >
> > if (scldel < scldel_min)
> > continue;
> >
> > for (a = 0; a < STM32_SDADEL_MAX; a++) {
> > - u32 sdadel = (a * (p + 1) + 1) * i2cclk;
> > + int sdadel = (a * (p + 1) + 1) * i2cclk;
> >
> > if (((sdadel >= sdadel_min) &&
> > (sdadel <= sdadel_max)) &&
> > @@ -527,36 +563,40 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup,
> > }
> > }
> >
> > - if (list_empty(solutions))
> > + if (list_empty(solutions)) {
> > + pr_err("no Prescaler solution\n");
> > ret = -EPERM;
> > + }
> >
> > return ret;
> > }
> >
> > -static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup,
> > +static int stm32_i2c_choose_solution(u32 i2cclk,
> > + struct stm32_i2c_setup *setup,
> > + const struct stm32_i2c_spec *specs,
> > struct list_head *solutions,
> > struct stm32_i2c_timings *s)
> > {
> > struct stm32_i2c_timings *v;
> > - u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->speed_freq);
> > + u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
> > + setup->timings.bus_freq_hz);
> > u32 clk_error_prev = i2cbus;
> > - u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src);
> > u32 clk_min, clk_max;
> > - u32 af_delay_min = 0;
> > + u32 af_delay_min;
> > u32 dnf_delay;
> > u32 tsync;
> > u16 l, h;
> > bool sol_found = false;
> > int ret = 0;
> >
> > - if (setup->analog_filter)
> > - af_delay_min = STM32_I2C_ANALOG_FILTER_DELAY_MIN;
> > + af_delay_min = setup->analog_filter ?
> > + STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0;
> >
> > dnf_delay = setup->dnf * i2cclk;
> >
> > tsync = af_delay_min + dnf_delay + (2 * i2cclk);
> > - clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min;
> > - clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max;
> > + clk_max = NSEC_PER_SEC / specs->rate_min;
> > + clk_min = NSEC_PER_SEC / specs->rate_max;
> >
> > /*
> > * Among Prescaler possibilities discovered above figures out SCL Low
> > @@ -574,7 +614,7 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup,
> > for (l = 0; l < STM32_SCLL_MAX; l++) {
> > u32 tscl_l = (l + 1) * prescaler + tsync;
> >
> > - if ((tscl_l < i2c_specs[setup->speed].l_min) ||
> > + if (tscl_l < specs->l_min ||
> > (i2cclk >=
> > ((tscl_l - af_delay_min - dnf_delay) / 4))) {
> > continue;
> > @@ -583,16 +623,17 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup,
> > for (h = 0; h < STM32_SCLH_MAX; h++) {
> > u32 tscl_h = (h + 1) * prescaler + tsync;
> > u32 tscl = tscl_l + tscl_h +
> > - setup->timings.scl_rise_ns +
> > - setup->timings.scl_fall_ns;
> > + setup->timings.scl_rise_ns + setup->timings.scl_fall_ns;
> >
> > if ((tscl >= clk_min) && (tscl <= clk_max) &&
> > - (tscl_h >= i2c_specs[setup->speed].h_min) &&
> > + (tscl_h >= specs->h_min) &&
> > (i2cclk < tscl_h)) {
> > - int clk_error = tscl - i2cbus;
> > + u32 clk_error;
> >
> > - if (clk_error < 0)
> > - clk_error = -clk_error;
> > + if (tscl > i2cbus)
> > + clk_error = tscl - i2cbus;
> > + else
> > + clk_error = i2cbus - tscl;
> >
> > if (clk_error < clk_error_prev) {
> > clk_error_prev = clk_error;
> > @@ -606,61 +647,68 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup,
> > }
> > }
> >
> > - if (!sol_found)
> > + if (!sol_found) {
> > + pr_err("no solution at all\n");
> > ret = -EPERM;
> > + }
> >
> > return ret;
> > }
> >
> > -static int stm32_i2c_compute_timing(struct stm32_i2c *i2c_priv,
> > - struct stm32_i2c_setup *setup,
> > +static const struct stm32_i2c_spec *get_specs(u32 rate)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(i2c_specs); i++)
> > + if (rate <= i2c_specs[i].rate)
> > + return &i2c_specs[i];
> > +
> > + /* NOT REACHED */
> > + return ERR_PTR(-EINVAL);
> > +}
> > +
> > +static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv,
> > struct stm32_i2c_timings *output)
> > {
> > struct device *dev = &i2c_priv->adapter.dev;
> > + struct stm32_i2c_setup *setup = &i2c_priv->setup;
> > + const struct stm32_i2c_spec *specs;
> > struct stm32_i2c_timings *v, *_v;
> > struct list_head solutions;
> > + u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src);
> > int ret;
> >
> > - if (setup->speed >= STM32_I2C_SPEED_END) {
> > - dev_err(dev, "speed out of bound {%d/%d}\n",
> > - setup->speed, STM32_I2C_SPEED_END - 1);
> > + specs = get_specs(setup->timings.bus_freq_hz);
> > + if (specs == ERR_PTR(-EINVAL)) {
> > + dev_err(dev, "speed out of bound {%d}\n",
> > + setup->timings.bus_freq_hz);
> > return -EINVAL;
> > }
> >
> > - if ((setup->timings.scl_rise_ns > i2c_specs[setup->speed].rise_max) ||
> > - (setup->timings.scl_fall_ns > i2c_specs[setup->speed].fall_max)) {
> > + if (setup->timings.scl_rise_ns > specs->rise_max ||
> > + setup->timings.scl_fall_ns > specs->fall_max) {
> > dev_err(dev, "timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
> > - setup->timings.scl_rise_ns, i2c_specs[setup->speed].rise_max,
> > - setup->timings.scl_fall_ns, i2c_specs[setup->speed].fall_max);
> > + setup->timings.scl_rise_ns, specs->rise_max,
> > + setup->timings.scl_fall_ns, specs->fall_max);
> > return -EINVAL;
> > }
> >
> > + /* Analog and Digital Filters */
> > + setup->dnf = DIV_ROUND_CLOSEST(i2c_priv->setup.timings.digital_filter_width_ns, i2cclk);
> > if (setup->dnf > STM32_I2C_DNF_MAX) {
> > dev_err(dev, "DNF out of bound %d/%d\n",
> > - setup->dnf, STM32_I2C_DNF_MAX);
> > - return -EINVAL;
> > - }
> > -
> > - if (setup->speed_freq > i2c_specs[setup->speed].rate) {
> > - dev_err(dev, "Freq {%d/%d}\n",
> > - setup->speed_freq, i2c_specs[setup->speed].rate);
> > + setup->dnf, STM32_I2C_DNF_MAX);
> > return -EINVAL;
> > }
> >
> > INIT_LIST_HEAD(&solutions);
> > - ret = stm32_i2c_compute_solutions(setup, &solutions);
> > - if (ret) {
> > - if (ret == -EPERM)
> > - dev_err(dev, "No prescaler solution\n");
> > + ret = stm32_i2c_compute_solutions(i2cclk, setup, specs, &solutions);
> > + if (ret)
> > goto exit;
> > - }
> >
> > - ret = stm32_i2c_choose_solution(setup, &solutions, output);
> > - if (ret) {
> > - if (ret == -EPERM)
> > - dev_err(dev, "no solution at all\n");
> > + ret = stm32_i2c_choose_solution(i2cclk, setup, specs, &solutions, output);
> > + if (ret)
> > goto exit;
> > - }
> >
> > dev_dbg(dev, "Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n",
> > output->presc,
> > @@ -677,16 +725,25 @@ static int stm32_i2c_compute_timing(struct stm32_i2c *i2c_priv,
> > return ret;
> > }
> >
> > -static int stm32_i2c_setup_timing(struct stm32_i2c *i2c_priv,
> > - enum stm32_i2c_speed speed,
> > +static u32 get_lower_rate(u32 rate)
> > +{
> > + int i;
> > +
> > + for (i = ARRAY_SIZE(i2c_specs) - 1; i >= 0; i--)
> > + if (rate > i2c_specs[i].rate)
> > + return i2c_specs[i].rate;
> > +
> > + return i2c_specs[0].rate;
> > +}
> > +
> > +static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv,
> > struct stm32_i2c_timings *timing)
> > {
> > struct device *dev = &i2c_priv->adapter.dev;
> > struct stm32_i2c_setup *setup = &i2c_priv->setup;
> > int ret = 0;
> >
> > - setup->speed = speed;
> > - setup->speed_freq = i2c_specs[setup->speed].rate;
> > + setup->timings.bus_freq_hz = i2c_priv->speed;
> > setup->clock_src = clk_get_rate(i2c_priv->clk);
> >
> > if (!setup->clock_src) {
> > @@ -695,15 +752,14 @@ static int stm32_i2c_setup_timing(struct stm32_i2c *i2c_priv,
> > }
> >
> > do {
> > - ret = stm32_i2c_compute_timing(i2c_priv, setup, timing);
> > + ret = stm32_i2c_compute_timing(i2c_priv, timing);
> > if (ret) {
> > dev_dbg(dev, "failed to compute I2C timings.\n");
> > - if (speed > STM32_I2C_SPEED_STANDARD) {
> > - speed--;
> > - setup->speed = speed;
> > - setup->speed_freq = i2c_specs[setup->speed].rate;
> > + if (setup->timings.bus_freq_hz > STANDARD_RATE) {
> > + setup->timings.bus_freq_hz =
> > + get_lower_rate(setup->timings.bus_freq_hz);
> > dev_dbg(dev, "downgrade I2C Speed Freq to (%i)\n",
> > - i2c_specs[setup->speed].rate);
> > + setup->timings.bus_freq_hz);
> > } else {
> > break;
> > }
> > @@ -715,31 +771,60 @@ static int stm32_i2c_setup_timing(struct stm32_i2c *i2c_priv,
> > return ret;
> > }
> >
> > - dev_dbg(dev, "I2C Speed(%i), Freq(%i), Clk Source(%i)\n",
> > - setup->speed, setup->speed_freq, setup->clock_src);
> > + dev_dbg(dev, "I2C Freq(%i), Clk Source(%i)\n",
> > + setup->timings.bus_freq_hz, setup->clock_src);
> > dev_dbg(dev, "I2C Rise(%i) and Fall(%i) Time\n",
> > - setup->timings.scl_rise_ns, setup->timings.scl_fall_ns);
> > + setup->timings.scl_rise_ns, setup->timings.scl_fall_ns);
> > dev_dbg(dev, "I2C Analog Filter(%s), DNF(%i)\n",
> > - setup->analog_filter ? "On" : "Off", setup->dnf);
> > + setup->analog_filter ? "On" : "Off", setup->dnf);
> > +
> > + i2c_priv->speed = setup->timings.bus_freq_hz;
> >
> > return 0;
> > }
> >
> > -static int stm32_i2c_hw_config(struct stm32_i2c *i2c_priv,
> > - enum stm32_i2c_speed speed)
> > +static int stm32_i2c_write_fm_plus_bits(struct stm32_i2c_priv *i2c_priv)
> > +{
> > + int ret;
> > + bool enable = i2c_priv->speed > FAST_RATE;
> > +
> > + /* Optional */
> > + if (IS_ERR_OR_NULL(i2c_priv->regmap))
> > + return 0;
> > +
> > + if (i2c_priv->regmap_sreg == i2c_priv->regmap_creg)
> > + ret = regmap_update_bits(i2c_priv->regmap,
> > + i2c_priv->regmap_sreg,
> > + i2c_priv->regmap_mask,
> > + enable ? i2c_priv->regmap_mask : 0);
> > + else
> > + ret = regmap_write(i2c_priv->regmap,
> > + enable ? i2c_priv->regmap_sreg :
> > + i2c_priv->regmap_creg,
> > + i2c_priv->regmap_mask);
> > +
> > + return ret;
> > +}
> > +
> > +static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv)
> > {
> > struct stm32_i2c_regs *regs = i2c_priv->regs;
> > struct stm32_i2c_timings t;
> > int ret;
> > u32 timing = 0;
> >
> > - ret = stm32_i2c_setup_timing(i2c_priv, speed, &t);
> > + ret = stm32_i2c_setup_timing(i2c_priv, &t);
> > if (ret)
> > return ret;
> >
> > /* Disable I2C */
> > clrbits_le32(®s->cr1, STM32_I2C_CR1_PE);
> >
> > + /* Setup Fast mode plus if necessary */
> > + ret = stm32_i2c_write_fm_plus_bits(i2c_priv);
> > + if (ret)
> > + return ret;
> > +
> > /* Timing settings */
> > timing |= STM32_I2C_TIMINGR_PRESC(t.presc);
> > timing |= STM32_I2C_TIMINGR_SCLDEL(t.scldel);
> > @@ -753,44 +838,74 @@ static int stm32_i2c_hw_config(struct stm32_i2c *i2c_priv,
> > clrbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF);
> > else
> > setbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF);
> > +
> > + /* Program the Digital Filter */
> > + clrsetbits_le32(®s->cr1, STM32_I2C_CR1_DNF_MASK,
> > + STM32_I2C_CR1_DNF(i2c_priv->setup.dnf));
> > +
> > setbits_le32(®s->cr1, STM32_I2C_CR1_PE);
> >
> > return 0;
> > }
> >
> > -static int stm32_i2c_set_bus_speed(struct stm32_i2c *i2c_priv, unsigned speed)
> > +static int stm32_i2c_set_bus_speed(struct stm32_i2c_priv *i2c_priv, unsigned int speed)
> > {
> > - struct device *parent_dev = i2c_priv->adapter.dev.parent;
> > - enum stm32_i2c_speed stm32_speed;
> > - switch (speed) {
> > - case STANDARD_RATE:
> > - stm32_speed = STM32_I2C_SPEED_STANDARD;
> > - break;
> > - case FAST_RATE:
> > - stm32_speed = STM32_I2C_SPEED_FAST;
> > - break;
> > - case FAST_PLUS_RATE:
> > - stm32_speed = STM32_I2C_SPEED_FAST_PLUS;
> > - break;
> > - default:
> > - dev_warn(parent_dev, "Speed %d not supported\n", speed);
> > + struct device *dev = &i2c_priv->adapter.dev;
> > +
> > + if (speed > FAST_PLUS_RATE) {
> > + dev_dbg(dev, "Speed %d not supported\n", speed);
> > return -EINVAL;
> > }
> >
> > - return stm32_i2c_hw_config(i2c_priv, stm32_speed);
> > + i2c_priv->speed = speed;
> > +
> > + return stm32_i2c_hw_config(i2c_priv);
> > +}
> > +
> > +static int stm32_of_to_plat(struct device *dev, struct stm32_i2c_priv *i2c_priv)
> > +{
> > + const struct stm32_i2c_data *data;
> > + int ret;
> > +
> > + ret = dev_get_drvdata(dev, (const void **)&data);
> > + if (ret)
> > + return ret;
> > +
> > + if (of_property_read_u32(dev->of_node, "i2c-digital-filter-width-ns",
> > + &i2c_priv->setup.timings.digital_filter_width_ns))
> > + i2c_priv->setup.timings.digital_filter_width_ns = 0;
> > + if (!of_property_read_bool(dev->of_node, "i2c-digital-filter"))
> > + i2c_priv->setup.timings.digital_filter_width_ns = 0;
> > +
> > + i2c_priv->setup.analog_filter =
> > + of_property_read_bool(dev->of_node, "i2c-analog-filter");
> > +
> > + /* Optional */
> > + i2c_priv->regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
> > + "st,syscfg-fmp");
> > + if (!IS_ERR(i2c_priv->regmap)) {
> > + u32 fmp[3];
> > +
> > + ret = of_property_read_u32_array(dev->of_node, "st,syscfg-fmp", fmp, 3);
> > + if (ret)
> > + return ret;
> > +
> > + i2c_priv->regmap_sreg = fmp[1];
> > + i2c_priv->regmap_creg = fmp[1] + data->fmp_clr_offset;
> > + i2c_priv->regmap_mask = fmp[2];
> > + }
> > +
> > + return 0;
> > }
> >
> > static int __init stm32_i2c_probe(struct device *dev)
> > {
> > struct resource *iores;
> > - struct stm32_i2c *stm32_i2c;
> > + struct stm32_i2c_priv *stm32_i2c;
> > struct i2c_platform_data *pdata;
> > - const struct stm32_i2c_setup *setup;
> > struct i2c_timings *timings;
> > int ret;
> >
> > - pdata = dev->platform_data;
> > -
> > stm32_i2c = xzalloc(sizeof(*stm32_i2c));
> >
> > stm32_i2c->clk = clk_get(dev, NULL);
> > @@ -798,15 +913,20 @@ static int __init stm32_i2c_probe(struct device *dev)
> > return PTR_ERR(stm32_i2c->clk);
> > clk_enable(stm32_i2c->clk);
> >
> > + iores = dev_request_mem_resource(dev, 0);
> > + if (IS_ERR(iores))
> > + return PTR_ERR(iores);
> > +
> > + stm32_i2c->regs = IOMEM(iores->start);
> > +
> > ret = device_reset_us(dev, 2);
> > if (ret)
> > return ret;
> >
> > - ret = dev_get_drvdata(dev, (const void **)&setup);
> > + ret = stm32_of_to_plat(dev, stm32_i2c);
> > if (ret)
> > return ret;
> >
> > - stm32_i2c->setup = *setup;
> > timings = &stm32_i2c->setup.timings;
> >
> > /* We've our own defaults, so don't use the i2c_parse_fw_timings ones */
> > @@ -824,12 +944,8 @@ static int __init stm32_i2c_probe(struct device *dev)
> > stm32_i2c->adapter.nr = dev->id;
> > stm32_i2c->adapter.dev.parent = dev;
> > stm32_i2c->adapter.dev.of_node = dev->of_node;
> > - iores = dev_request_mem_resource(dev, 0);
> > - if (IS_ERR(iores))
> > - return PTR_ERR(iores);
> > -
> > - stm32_i2c->regs = IOMEM(iores->start);
> >
> > + pdata = dev->platform_data;
> > if (pdata && pdata->bitrate)
> > timings->bus_freq_hz = pdata->bitrate;
> >
> > @@ -840,14 +956,10 @@ static int __init stm32_i2c_probe(struct device *dev)
> > return i2c_add_numbered_adapter(&stm32_i2c->adapter);
> > }
> >
> > -static const struct stm32_i2c_setup stm32f7_setup = {
> > - .dnf = STM32_I2C_DNF_DEFAULT,
> > - .analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE,
> > -};
> > -
> > static __maybe_unused struct of_device_id stm32_i2c_dt_ids[] = {
> > - { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup, },
> > - { .compatible = "st,stm32mp15-i2c", .data = &stm32f7_setup},
> > + { .compatible = "st,stm32f7-i2c", .data = &stm32f7_data },
> > + { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_data },
> > + { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_data },
> > { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(of, stm32_i2c_dt_ids);
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
next prev parent reply other threads:[~2023-08-03 10:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 10:23 Alexander Shiyan
2023-08-03 10:39 ` Ahmad Fatoum
2023-08-03 10:46 ` Alexander Shiyan [this message]
2023-08-07 7:25 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAP1tNvS7KqMUHNuvYm7YeJka_7iTNnrGHjec17sj-FZtqURigg@mail.gmail.com \
--to=eagle.alexander923@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox