mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Premi, Sanjeev" <premi@ti.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: RE: [PATCH] omap3 towards thumb2 support
Date: Mon, 16 Jan 2012 16:16:57 +0000	[thread overview]
Message-ID: <E28AAFD00EFAA646AE3DF9B89CD24A89317FB2B7@DBDE01.ent.ti.com> (raw)
In-Reply-To: <20120116154626.GS5446@pengutronix.de>

(responding via webmail. Won't be able to quote properly)
________________________________________
From: Sascha Hauer [s.hauer@pengutronix.de]
Sent: Monday, January 16, 2012 9:16 PM
To: Premi, Sanjeev
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] omap3 towards thumb2 support

On Mon, Jan 16, 2012 at 12:42:36PM +0000, Premi, Sanjeev wrote:
>
> > -----Original Message-----
> > From: barebox-bounces@lists.infradead.org
> > [mailto:barebox-bounces@lists.infradead.org] On Behalf Of
> > Premi, Sanjeev
> > Sent: Monday, January 16, 2012 5:32 PM
> > To: Sascha Hauer
> > Cc: barebox@lists.infradead.org
> > Subject: RE: [PATCH] omap3 towards thumb2 support
> >
>
> [snip]
>
> > > >
> > > > I was able to pull in your branch and encountered a minor
> > > > issue - fixed by the patch at end of this mail.
> > > >
> > > > How can I enable thumb2? Didn't find aything obvious in
> > > > omap3530_beagle_xload_defconfig.
> > >
> > > Did you merge the work/thumb2 branch into your branch? Then
> > you should
> > > find THUMB2_BAREBOX in menuconfig.
> >
> > Found it. I was searching in a "cached" version of the file already
> > in my editor. Will try immediately.
> >
>
> I discarded the patches that I had manually merged last week and
> pulled work/thumb2 instead.
>
> The size of MLO dropped from 47604 to 35052 bytes. However, it didn't
> boot successfully on the board. The MLO generated after removing
> CONFIG_THUMB2_BAREBOX came up fine.

Please check that CONFIG_STACK_BASE really is 0x4020F000. It may be set
differently if you started from an older config.

[sp} Already did this.

Also, the resulting binary should also be startable as a second stage
loader in which case you might get some stack trace if you have enabled
this in the first stage.

[sp] Okay, this could be the issue. I was always building as first stage
     bootloader only - as i was looking for the banner to appear.

     Will try using emulator tomorrow to debug further.

>
> BTW, I while merging this patch, I saw a warning that could be fixed
> before merging the patch into master.
>   8917ac1 : Applying: ARM: move exception vectors away from start of binary
>
> /home/premi/barebox/.git/rebase-apply/patch:236: new blank line at EOF.
> +
> warning: 1 line adds whitespace errors.

Ok, will fix.

I attached my binary MLO file. Could you check if it works for you? I
just checked this binary and it comes up with:

[sp] I will try tomorrow morning.

40V

barebox 2012.01.0-00204-g319f3a9 (Jan 16 2012 - 16:41:49)

Board: Texas Instrument's Beagle
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba ( )
Malloc space: 0x87bfff10 -> 0x87ffff0f (size  4 MB)
Stack space : 0x4020f000 -> 0x4020fc00 (size  3 kB)
booting from MMC1
could not read barebox.bin from sd card
booting failed

(I have no barebox.bin on my SD card, so 'booting failed' is ok)

Sascha

--
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-01-16 16:17 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-16 10:18 Sascha Hauer
2012-01-16 10:18 ` [PATCH 01/10] ARM omap3: remove OMAP3_COPY_CLOCK_SRAM Sascha Hauer
2012-01-16 10:18 ` [PATCH 02/10] ARM omap3 beagle xload: Move stack to SRAM Sascha Hauer
2012-01-16 10:18 ` [PATCH 03/10] ARM omap3: move board_init to pure_initcall Sascha Hauer
2012-01-16 10:18 ` [PATCH 04/10] ARM omap3: call a_init from board code Sascha Hauer
2012-01-16 10:18 ` [PATCH 05/10] ARM omap3 clock: move pll tables to C code Sascha Hauer
2012-01-16 10:18 ` [PATCH 06/10] ARM omap3: remove vector setup from lowlevel code Sascha Hauer
2012-01-16 10:18 ` [PATCH 07/10] ARM omap3: reimplement setup_auxcr in pure asm Sascha Hauer
2012-01-16 10:18 ` [PATCH 08/10] ARM cache-armv7: Add additional ISB Sascha Hauer
2012-01-16 10:18 ` [PATCH 09/10] mtd omap nand: fix driver without CONFIG_PARAMETER Sascha Hauer
2012-01-16 10:34   ` Sascha Hauer
2012-01-16 10:18 ` [PATCH 10/10] ARM omap3: make omap3_core.S thumb safe Sascha Hauer
2012-01-16 11:30 ` [PATCH] omap3 towards thumb2 support Premi, Sanjeev
2012-01-16 11:52   ` Sascha Hauer
2012-01-16 12:01     ` Premi, Sanjeev
2012-01-16 12:42       ` Premi, Sanjeev
2012-01-16 15:46         ` Sascha Hauer
2012-01-16 16:16           ` Premi, Sanjeev [this message]
2012-01-17 11:14             ` Premi, Sanjeev
2012-01-17 12:12               ` Sascha Hauer
2012-01-17 12:24                 ` Premi, Sanjeev
2012-01-17 13:10                   ` Sascha Hauer
2012-01-17 13:20                     ` Premi, Sanjeev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E28AAFD00EFAA646AE3DF9B89CD24A89317FB2B7@DBDE01.ent.ti.com \
    --to=premi@ti.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox