From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ip2.televic.com ([81.82.194.222]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WLX2f-00057m-Tt for barebox@lists.infradead.org; Thu, 06 Mar 2014 12:04:50 +0000 From: Vanhauwaert Wouter Date: Thu, 6 Mar 2014 13:04:20 +0100 Message-ID: References: <20140306095541.GY17250@pengutronix.de> <20140306101826.GA17250@pengutronix.de> In-Reply-To: <20140306101826.GA17250@pengutronix.de> Content-Language: en-US MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: RE: at91sam9260-ek ... To: Sascha Hauer Cc: "barebox@lists.infradead.org" > -----Original Message----- > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > Sent: donderdag 6 maart 2014 11:18 > To: Vanhauwaert Wouter > Cc: barebox@lists.infradead.org > Subject: Re: at91sam9260-ek ... > > On Thu, Mar 06, 2014 at 11:04:28AM +0100, Vanhauwaert Wouter wrote: > > > -----Original Message----- > > > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > > > Sent: donderdag 6 maart 2014 10:56 > > > To: Vanhauwaert Wouter > > > Cc: barebox@lists.infradead.org > > > Subject: Re: at91sam9260-ek ... > > > > > > On Wed, Mar 05, 2014 at 10:55:16AM +0100, Vanhauwaert Wouter wrote: > > > > Hello, > > > > > > > > Is the setup for a at91sam9260-ek still functioning? > > > > I have troubles with my nand flash. At first it boots and writes BBT-tables. > > > > However, next boot, it won't read the BBT, and has errors with the > > > > magic on > > > the environment variables. > > > > Erase /dev/env0 and saveenv do not make a difference. > > > > Nandtest does not give me errors... > > > > > > > > I'm just using the latest barebox 2014.2 and loading it on a > > > > at91sam9260-ek through usb (sam-ba). I'm just using the plain > > > > at91sam9260ek_defconfig > > > > > > Seems there's something broken. I have no better idea other than bisecting > it. > > > > > > > Is there a version which is definitely working and tested with at91sam9260-ek? > > I'd probably start at somewhere near: > > ecdb717 at91/boards: switch to software ecc as in linux kernel > > But I don't know if that version really works. > > (If you don't know already, you can always start barebox second stage from an > already running barebox, normally you shouldn't have to reflash for each > bisecting step. Something like "tftp barebox.bin /dev/ram0; go /dev/ram0" > should work.) > I did some tests and seems that it worked ok until version release 2013.08.0, from 2013.09.0 on it gives me these errors... _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox