Hi Marc, what is the effort to port the CAN stack to barebox? Christian Büttner Entwicklung Elektronik RAFI GmbH & Co. KG Ravensburger Str. 128-134, D-88276 Berg Tel.: +49 751 89-6075, Fax: +49 751 89-7414 mailto:christian.buettner@rafi.de, http://www.rafi.de Kommanditgesellschaft: Sitz Berg, Amtsgericht Ulm, HRA 550059 Komplementär: RAFI Beteiligungs-GmbH, Sitz Berg, Amtsgericht Ulm HRB 550074 Geschäftsführer: Albert Wasmeier, Dipl.-Kfm. Gerhard Schenk USt-Ident.-Nr.: DE 146 392 319, Steuer-Nr.: 77079/00291 Von: Marc Kleine-Budde An: christian.buettner@rafi.de Kopie: barebox@lists.infradead.org Datum: 08.02.2012 17:38 Betreff: Re: flash image through CAN On 02/08/2012 03:15 PM, christian.buettner@rafi.de wrote: > Hi all, > > we use the i.MX28 from freescale. > Has anyone succeeded flashing a linux or rootfs image through the barebox > bootloader using a CAN bus connection? > We need it to make a field update of the target possible. Not yet, but we can port the CAN stack to barebox. However, if you have the space, I suggest to boot into a minimal Linux-System to run the update there. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |