Hi Marc,

what is the effort to port the CAN stack to barebox?

Christian Büttner
Entwicklung Elektronik

RAFI GmbH & Co. KG
Ravensburger Str. 128-134, D-88276 Berg
Tel.:  +49 751 89-6075, Fax: +49 751 89-7414
mailto:christian.buettner@rafi.de, http://www.rafi.de

Kommanditgesellschaft: Sitz Berg, Amtsgericht Ulm, HRA 550059
Komplementär: RAFI Beteiligungs-GmbH, Sitz Berg, Amtsgericht Ulm HRB 550074
Geschäftsführer: Albert Wasmeier, Dipl.-Kfm. Gerhard Schenk
USt-Ident.-Nr.: DE 146 392 319, Steuer-Nr.: 77079/00291



Von:        Marc Kleine-Budde <mkl@pengutronix.de>
An:        christian.buettner@rafi.de
Kopie:        barebox@lists.infradead.org
Datum:        08.02.2012 17:38
Betreff:        Re: flash image through CAN

---

On 02/08/2012 03:15 PM, christian.buettner@rafi.de wrote:
> Hi all,
>
> we use the i.MX28 from freescale.
> Has anyone succeeded flashing a linux or rootfs image through the barebox
> bootloader using a CAN bus connection?
> We need it to make a field update of the target possible.

Not yet, but we can port the CAN stack to barebox. However, if you have
the space, I suggest to boot into a minimal Linux-System to run the
update there.

Marc
--
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |