I see! I have an entry in the env/config: nand_parts="256k(barebox)ro,768k(bareboxenv),4M(kernel),128M(root)" The Problem might be, that the NAND Flash size is only 128M. I took the script from another platform.. - - Christian Von: Alexander Aring An: christian.buettner@rafi.de Kopie: barebox@lists.infradead.org Datum: 29.03.2012 14:08 Betreff: Re: Create NAND Partition through barebox Hi, you can create NAND Partitons with nand_parts variable in /env/config. For example nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)" nand -a nand0.* only creates a bb device that will handle badblocks if they appear. Cheers Alex Am 29. März 2012 13:55 schrieb : Hi, i need to create a NAND Partition through the barebox prompt to be able to flash a kernel image on it. This is the current devinfo of my target: barebox:/ devinfo devices: `---- imx_serial0 `---- cs0 `---- mem0 `---- 0x00000000-0x1fffffff: /dev/ram0 `---- mem1 `---- 0x00000000-0x1fffffff: /dev/ram1 `---- imx_iim0 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank0 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank1 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank2 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank3 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank4 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank5 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank6 `---- 0x00000000-0x0000001f: /dev/imx_iim_bank7 `---- ramfs0 `---- devfs0 `---- mem2 `---- 0x00000000-0x000018ab: /dev/defaultenv `---- mem3 `---- 0x00000000-0xfffffffe: /dev/mem `---- cs1 `---- fec_imx0 `---- miidev0 `---- 0x00000000-0x0000003f: /dev/phy0 `---- eth0 drivers: imx_serial ramfs devfs imx_iim fec_imx miidev mem I tried using $ nand -a /dev/nand0.* Nothing happens.. What is wrong? - - Christian _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox