From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/6] ARM: dts: i.MX8MP: drop now upstream imx8mp-nominal.dtsi
Date: Mon, 14 Apr 2025 10:37:36 +0200 [thread overview]
Message-ID: <Z_zJUIijGZGEqcAu@pengutronix.de> (raw)
In-Reply-To: <20250414065009.2770749-1-a.fatoum@pengutronix.de>
On Mon, Apr 14, 2025 at 08:50:04AM +0200, Ahmad Fatoum wrote:
> This file is now available in Linux since v6.15-rc1, so we do not need
> to duplicate it in barebox for boards to make use of it.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/arm/dts/imx8mp-nominal.dtsi | 49 --------------------------------
> 1 file changed, 49 deletions(-)
> delete mode 100644 arch/arm/dts/imx8mp-nominal.dtsi
>
> diff --git a/arch/arm/dts/imx8mp-nominal.dtsi b/arch/arm/dts/imx8mp-nominal.dtsi
> deleted file mode 100644
This is used by imx8mp-skov-reva.dtsi. Should the include be changed to
use <> instead of "" now?
Sascha
> index d675d1e5486e..000000000000
> --- a/arch/arm/dts/imx8mp-nominal.dtsi
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -
> -&clk {
> - assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
> - <&clk IMX8MP_CLK_A53_CORE>,
> - <&clk IMX8MP_SYS_PLL3>,
> - <&clk IMX8MP_CLK_NOC>,
> - <&clk IMX8MP_CLK_NOC_IO>,
> - <&clk IMX8MP_CLK_GIC>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
> - <&clk IMX8MP_ARM_PLL_OUT>,
> - <0>,
> - <&clk IMX8MP_SYS_PLL1_800M>,
> - <&clk IMX8MP_SYS_PLL3_OUT>,
> - <&clk IMX8MP_SYS_PLL1_800M>;
> - assigned-clock-rates = <0>, <0>,
> - <600000000>,
> - <800000000>,
> - <600000000>,
> - <400000000>;
> -};
> -
> -&pgc_hsiomix {
> - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - assigned-clock-rates = <400000000>;
> -};
> -
> -&pgc_gpumix {
> - assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
> - <&clk IMX8MP_CLK_GPU_AHB>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL3_OUT>,
> - <&clk IMX8MP_SYS_PLL3_OUT>;
> - assigned-clock-rates = <600000000>, <300000000>;
> -};
> -
> -&media_blk_ctrl {
> - assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
> - <&clk IMX8MP_CLK_MEDIA_APB>,
> - <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
> - <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
> - <&clk IMX8MP_VIDEO_PLL1>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
> - <&clk IMX8MP_SYS_PLL1_800M>,
> - <&clk IMX8MP_VIDEO_PLL1_OUT>,
> - <&clk IMX8MP_VIDEO_PLL1_OUT>;
> - assigned-clock-rates = <400000000>, <200000000>,
> - <0>, <0>, <1039500000>;
> -};
> --
> 2.39.5
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2025-04-14 8:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-14 6:50 Ahmad Fatoum
2025-04-14 6:50 ` [PATCH 2/6] ARM: i.MX8MP: skov: decrease VDD_SOC to 850mV Ahmad Fatoum
2025-04-14 6:50 ` [PATCH 3/6] ARM: i.MX8MP: skov: assert switch reset early Ahmad Fatoum
2025-04-14 6:50 ` [PATCH 4/6] ARM: i.MX8MP: skov: halt startup until power is good Ahmad Fatoum
2025-04-14 8:40 ` Marco Felsch
2025-04-14 8:46 ` Ahmad Fatoum
2025-04-14 9:21 ` Marco Felsch
2025-04-14 9:36 ` Ahmad Fatoum
2025-04-14 10:56 ` Marco Felsch
2025-04-14 11:11 ` Ahmad Fatoum
2025-04-14 6:50 ` [PATCH 5/6] ARM: skov-imx8mp: print initial > on every boot Ahmad Fatoum
2025-04-14 6:50 ` [PATCH 6/6] ARM: i.MX8MP: skov: add new 7" g07017 variant support Ahmad Fatoum
2025-04-14 8:37 ` Sascha Hauer [this message]
2025-04-14 8:46 ` [PATCH 1/6] ARM: dts: i.MX8MP: drop now upstream imx8mp-nominal.dtsi Ahmad Fatoum
2025-04-14 9:19 ` Sascha Hauer
2025-04-15 6:48 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z_zJUIijGZGEqcAu@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox