From: Sascha Hauer <sha@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2024.02.0
Date: Tue, 20 Feb 2024 09:32:59 +0100 [thread overview]
Message-ID: <ZdRju8OQTsBb0Jut@pengutronix.de> (raw)
Hi All,
barebox-2024.02.0 is out. This release brings us Layerscape LS1028a
support. Along with this the Layerscape support is moved over to
multi-platform so that we no longer have to build it separately. Marco
has worked on OP-TEE support with several improvements: barebox can
now parse the OP-TEE binary headers on ARMv8 and thus on i.MX8 no longer
depends on hardcoded addresses, but can put the binary into the correct
place automatically. Ahmad has phased out some relicts from the early
days: He removed the auto generation of the ARM mach-types.h file. With
this we can no longer add ancient machines depending on mach types. The
future is there ;)
As usual several assorted changes all over the place, see below.
Have Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (70):
ARM: mach-types: remove all unused by barebox
ARM: mach-types: don't generate header at buildtime
cdev: make __devfs_add_partition's last argument optional
driver.h: move devfs_add/del_partition later in file
cdev: export cdevfs_add_partition for general use
partition: switch to using cdevfs_add_partition
cdev: export and use cdevfs_del_partition
cdev: delete partitions when deleting master cdev
ARM: layerscape: ppa: fix type of C variable used in inline assembly
dma: rename OF_DMA_DEFAULT_COHERENT to ARCH_DMA_DEFAULT_COHERENT
dma: select ARCH_DMA_DEFAULT_COHERENT for x86 and sandbox
dma: introduce CONFIG_OF_DMA_COHERENCY
RISC-V: StarFive: J7100: set /soc/dma-noncoherent
ARM: dts: layerscape: add header for barebox DT overrides
ARM: dts: layerscape: mark ls1046a SoC DMA incoherent in DT
compiler: define __ll_elem for linker list elements
treewide: mark linker list elements with __ll_elem
list: rename debugging hooks
lib: add optional linked list debugging
cdev: simplify loop in cdev_by_device_node
cdev: add cdev_alloc helper for creating cdevs
rsatoc: fix typo in usage string
sandbox: set DMA_ALIGNMENT instead of defining dma_alloc
kvx: set DMA_ALIGNMENT instead of defining dma_alloc
mips: set DMA_ALIGNMENT instead of defining dma_alloc
dma: don't allow override of dma_alloc/dma_free
gitignore: ignore mvebu binary.0 firmware files
usb: dwc3: of-simple: remove unmatchable compatibles
usb: xhci: call dma_unmap_single in error paths
of: populate new device_d::dma_coherent attribute
dma: fix dma_sync when not all device DMA is equally coherent
dma: align barebox DMA coherency setting with kernel's
ARM: layerscape: configure all DMA masters to be cache-coherent
ARM: layerscape: enable DWC3 snooping on ls1046a
ARM: i.MX8M: remove unutilized start parameter to i.MX8M load functions
ARM: i.MX8M: return error if imx_load_image can't honour entry address
pbl: add COMPILE_TEST prompt for PBL_VERIFY_PIGGY
clk: make COMMON_CLK a visible symbol
clk: select CLKDEV_LOOKUP from COMMON_CLK
ARM: dts: i.MX8MP: drop temporary workaround
soc: imx: imx8m-featctrl: make header self-contained
nvmem: ocotp: prepare adding tester3 support
soc: imx: featctrl: finalize support for i.MX8MP
drivers: soc: split off powerdomains into new pmdomain directory
pmdomain: use single implementation for dev_pm_domain_attach
pmdomain: power: drop unused parameters for internal functions
pmdomain: associate devices with their power domain
pmdomain: push have_genpd_providers check into __genpd_dev_pm_attach
pmdomain: drop superfluous parameter to __genpd_dev_pm_attach
pmdomain: implement dev_pm_domain_attach_by_id/name
pmdomain: add support for enabling power domains later on
pmdomain: imx: gpcv2: enable COMPILE_TEST build
pmdomain: add stub definition for dev_pm_domain_detach
pmdomain: add stub definition for pm_runtime_put_genpd
pmdomain: implement pm_genpd_remove/of_genpd_del_provider for cleanup
driver: have dev_request_mem_region_err_null warn if resource starts at 0
include: linux/device.h: implement dev_platform_ioremap_resource
regmap: include missing header from linux/regmap.h
clk: define aliases for clk_bulk_prepare_enable/disable_unprepare
driver: make driver.h header self-contained
pmdomain: imx: add i.MX8MP HSIO blk-ctrl driver
ARM: dts: i.MX8MP: drop barebox,allow-dummy for HSIO blk-ctrl
ARM: socfpga: complete definitions of handoff registers
ARM: socfpga: populate HANDOFF_FPGA2SDR with Quartus value
fpga: socfpga-fpga2sdram-bridge: consult HANDOFF_FPGA2SDR register
fpga: socfpga-fpga2sdram-bridge: always populate HANDOFF_FPGA2SDR register
mtd: spi-nor: fix format specifier in debug message
mci: sdhci: atmel: fix truncation when reading out caps
i2c: don't return error pointers from of_find_i2c_adapter_by_node
ddr: fsl: fix possible use of uninitalized variable
Alvin Šipraga (4):
net: fec_imx: reverse registration order of mdiobus and edev
net: dsa: realtek: fix support for MDIO-connected switches
net: dsa: realtek: unify ds_ops
net: mdio_bus: associate OF nodes with their devices
Antony Pavlov (4):
MIPS: asm/pbl_nmon.h: add guard macro
MIPS: qemu-malta*_defconfig: enable e1000 network driver
uImage: use IS_ENABLED(CONFIG_TIMESTAMP)
common: Kconfig: TIMESTAMP: fix help
Bastian Krause (4):
mfd: rn5t568: add complete register map to header and use it
i2c: add pmic_reg_read8() for PBL use
Documentation: usb: document bbu fastboot partition name
usbgadget: add bbu fastboot partition naming scheme
Enrico Jorns (1):
Documentation: user: usb: fix duplicate literal block
Holger Assmann (1):
bootchooser: add new value "reset" to reset boot attempts counter
Jules Maselbas (1):
Documentation: Fix heading level of TFTP windowsize section
Marco Felsch (22):
mtd: spi-nor: add support for Winbond w25q256jwm
ARM: boards: i.MX8M: add HAB support
ARM: boards: i.MX8MQ: align SPDX header with other imxcfg files
images: Makefile.imx: add i.MX9 comment
ARM: boards: polyhex-debix: fix file mode for 8g-lpddr4-timing.c
ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros
ARM: i.MX8M: bundle imx-scratch code
ARM: i.MX8M: scratch: make imx_scratch_space private
ARM: i.MX8M: romapi: refactor saving the bootrom log
ARM: i.MX8M: scratch: add optee_hdr area
common: limit BOOTM_OPTEE to 32bit systems
common: add OPTEE_SHM_SIZE to configure optee shared memory
optee: add header version check
optee: add helper functions to set/get the optee memory base
optee: optee_verify_header: constify optee_header
ARM64: mmu: add dynamic optee memory mapping support
ARM: i.MX8M: add dynamic optee memory of-fixup support
drivers: tee: optee: add support for dynamic optee memory base address
ARM: i.MX8M: atf: add support for optee hdr parsing
ARM: i.MX8M: allow board code to configure the bl33 loadaddr
ARM: i.MX8M: cleanup MX8M*_ATF_BL33_BASE_ADDR defines
ARM: i.MX8M: fix optee of-fixup logic
Rouven Czerwinski (1):
optee: add support to verify 64-bit headers as well
Sascha Hauer (90):
net: remove unused field from struct eth_device
pbl/pmic.h: rename pmic_reg_write() to pmic_reg_write8()
pci: remove duplicate definition of pci_resource_start
pci: Do not register device tree disabled devices
pci: layerscape: limit fixup to layerscape controllers
pci: fix __pci_bus_find_cap_start
pci: implement Enhanced Allocation support
pci: implement function level reset
pblimage: drop PowerPC support
pblimage: simplify a bit
pblimage: use roundup() from kernel.h
ARM: fix dmb on ARMv8
net: fsl_fman: gracefully exit of_fixup()
fsl-ddr: remove duplicate prototype
fsl-ddr: make endianess runtime decision
clk: layerscape: move chipinfo_ls1012a further up
clk: layerscape: add support for ls1028a
mci: imx-esdhc: add ls1028a support
dts: update to v6.7-rc6
dts: update to v6.7-rc7
net/phy: sync phy_interface_t types with Linux
soc/fsl: import immap_lsch3 from U-Boot
soc/fsl/immap_lsch2.h: cleanup
ARM: layerscape: decide SCFG endianess during runtime
ARM: layerscape: cleanup erratum_a009007
ARM: layerscape: cleanup erratum_a008997
ARM: layerscape: cleanup erratum_a009798
ARM: layerscape: drop wrong errata workaround
ARM: layerscape: cleanup erratum_a009008
ARM: Layerscape: pass base addresses to errata functions
ARM: Layerscape: add layerscape_uart_putc()
ARM: layerscape: implement ls1028a errata
ARM: layerscape: implement ls1028a debug_ll
include: <asm-generic/bug.h>: implement ASSERT()
ARM: Layerscape: add tzc400 support
ARM: Add ls1028a lowlevel init
ARM: atf: add bl31 v2 calling method
mci: imx-esdhc-pbl: factor out common function
mci: imx-esdhc-pbl: implement esdhc xload for ls1028a
net: Add fsl_enetc network driver support
memory: Fix reserve_sdram_region() return value
ARM: Layerscape: consolidate initcalls into one
ARM: Layerscape: LS1028a: reserve DDR region for TF-A
ARM: Layerscape: icid: make readonly arrays const
ARM: Layerscape: icid: rename functions
ARM: Layerscape: icid: move re-usable code to separate functions
ARM: Layerscape: icid: use of_property_write_u32_array() in of_set_iommu_prop()
ARM: Layerscape: icid: use of_property_write_u32_array() in of_set_qportal_iommu_prop()
ARM: Layerscape: icid: factor out setup_icid_offsets()
immap_lsch3: Add more stuff
ARM: Layerscape: LS1028a: fixup icids
ARM: psci: make header self contained
ARM: Layerscape: LS1028a: add psci node
ARM: Layerscape: move over to MULTIARCH
ARM: enable Layerscape boards in multi_v8_defconfig
ARM: multi_v8_defconfig: disable CONFIG_MCI_STARTUP
clk: layerscape: increase PLL divider array
ARM: Layerscape: LS1028a: implement bootsource detection
ARM: Layerscape: LS1028a: extend layerscape image filetype detection for LS1028a
ARM: Layerscape: LS1028a: Add barebox update handler
pblimage: Add LS1028a support
Merge branch 'for-next/layerscape-pblimage' into for-next/layerscape
ARM: Layerscape: add basic support for NXP LS1028a RDB
watchdog: imxulp: Fix timeout calculation
watchdog: imxulp: Fix prescaler setting on i.MX7ulp
mtd: nand: denali: Make partition binding configurable
firmware: add missing FIRMWARE_IMX8MQ_OPTEE symbol
firmware: add missing include
firmware: i.MX OP-TEE: Add some Kconfig help
ARM: i.MX93: add imx93_barebox_entry()
ARM: i.MX: export imx9_ddrc_sdram_size()
ARM: i.MX93: add scratch space support
dts: update to v6.8-rc1
ARM: i.MX93: Add OP-TEE support
ARM: i.MX: esdctl: change type to resource_size_t
Merge branch 'for-next/arm'
Merge branch 'for-next/cdev'
Merge branch 'for-next/dsa'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/imx-hsio-blk-ctrl'
Merge branch 'for-next/layerscape'
Merge branch 'for-next/misc'
Merge branch 'for-next/pci'
Merge branch 'for-next/net'
ARM: i.MX defconfigs: Enable ELE nvmem support
watchdog: restart handler: hang when watchdog cannot restart the machine
ARM: i.MX: add Kconfig option for scratchmem
gpio-vf610: always register 32 GPIOs
Release v2024.02.0
Stefan Kerkmann (5):
habv4: correct habv4 rom vector table
habv4: use hab rom implementation of report_event
ARM: i.MX8MP: enhance support for ocotp driver
of: fdt: fix memory leak in fdt_ensure_space
of: fdt: fix oob writes with large fdt properties
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
reply other threads:[~2024-02-20 8:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdRju8OQTsBb0Jut@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox