From: Oleksij Rempel <linux@rempel-privat.de>
To: barebox@lists.infradead.org
Subject: Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig
Date: Fri, 29 Sep 2017 14:29:21 +0200 [thread overview]
Message-ID: <a483bc68-8d0a-7d27-377e-e1941ddc4161@rempel-privat.de> (raw)
In-Reply-To: <20170928231249.4158-9-antonynpavlov@gmail.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 2079 bytes --]
Am 29.09.2017 um 01:12 schrieb Antony Pavlov:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> arch/riscv/configs/erizo_generic_defconfig | 55 ++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/riscv/configs/erizo_generic_defconfig b/arch/riscv/configs/erizo_generic_defconfig
> new file mode 100644
> index 000000000..8ccad8934
> --- /dev/null
> +++ b/arch/riscv/configs/erizo_generic_defconfig
> @@ -0,0 +1,55 @@
> +CONFIG_32BIT=y
> +CONFIG_BUILTIN_DTB=y
> +CONFIG_BUILTIN_DTB_NAME="erizo_generic"
> +# CONFIG_GLOBALVAR is not set
> +CONFIG_TEXT_BASE=0x80000000
> +CONFIG_MEMORY_LAYOUT_FIXED=y
> +CONFIG_STACK_BASE=0x800e0000
> +CONFIG_STACK_SIZE=0x20000
> +CONFIG_MALLOC_BASE=0x80100000
> +CONFIG_MALLOC_SIZE=0x100000
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_PANIC_HANG=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +# CONFIG_ERRNO_MESSAGES is not set
> +# CONFIG_TIMESTAMP is not set
> +# CONFIG_BOOTM is not set
> +# CONFIG_ENV_HANDLING is not set
> +CONFIG_POLLER=y
> +CONFIG_DEBUG_LL=y
> +CONFIG_LONGHELP=y
> +CONFIG_CMD_IOMEM=y
> +CONFIG_CMD_IMD=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_LOADY=y
> +CONFIG_CMD_CMP=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_SHA1SUM=y
> +CONFIG_CMD_MSLEEP=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_OF_DUMP=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_DHRYSTONE=y
> +CONFIG_OFDEVICE=y
> +CONFIG_DRIVER_SERIAL_NS16550=y
> +CONFIG_DRIVER_SPI_GPIO=y
> +CONFIG_I2C=y
> +CONFIG_I2C_GPIO=y
> +CONFIG_MTD=y
> +# CONFIG_MTD_OOB_DEVICE is not set
> +CONFIG_MTD_M25P80=y
> +CONFIG_CLOCKSOURCE_DUMMY_RATE=60000
> +CONFIG_EEPROM_AT25=y
> +CONFIG_EEPROM_AT24=y
hm... none of it seems to be in devicetree. Do you need this eeproms?
> +CONFIG_GPIO_GENERIC_PLATFORM=y
> +# CONFIG_PINCTRL is not set
> +CONFIG_DIGEST_CRC32_GENERIC=y
>
--
Regards,
Oleksij
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 149 bytes --]
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-09-29 12:35 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-28 23:12 [RFC v4 00/10] add initial RISC-V architecture support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 01/10] Add " Antony Pavlov
2017-09-29 12:07 ` Oleksij Rempel
2017-09-30 11:57 ` Antony Pavlov
2017-10-02 7:43 ` Oleksij Rempel
2017-10-02 14:08 ` Antony Pavlov
2017-10-02 10:04 ` Daniel Schultz
2017-10-02 22:15 ` Antony Pavlov
2017-10-02 10:08 ` Daniel Schultz
2017-10-02 22:21 ` Antony Pavlov
2017-10-05 10:55 ` Daniel Schultz
2017-10-06 15:39 ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 02/10] RISC-V: add Erizo SoC support Antony Pavlov
2017-09-29 12:18 ` Oleksij Rempel
2017-09-30 12:05 ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
2017-09-28 23:12 ` [RFC v4 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
2017-09-29 12:26 ` Oleksij Rempel
2017-09-30 12:22 ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
2017-09-28 23:12 ` [RFC v4 06/10] RISC-V: erizo: enable NMON Antony Pavlov
2017-09-28 23:12 ` [RFC v4 07/10] RISC-V: erizo: add nmon image creation Antony Pavlov
2017-09-28 23:12 ` [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
2017-09-29 12:29 ` Oleksij Rempel [this message]
2017-09-30 12:38 ` Antony Pavlov
2017-09-28 23:12 ` [RFC v4 09/10] scripts: add nmon-loader Antony Pavlov
2017-09-28 23:12 ` [RFC v4 10/10] Documentation: add RISC-V docs Antony Pavlov
2017-09-29 12:35 ` Oleksij Rempel
2017-09-30 12:34 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a483bc68-8d0a-7d27-377e-e1941ddc4161@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox