Re: [PATCH] ARM: imx: add ddr3 ram support

[Sascha Hauer <s.hauer@pengutronix.de>]

On Wed, Oct 08, 2025 at 02:25:13PM +0200, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maudspierings@gocontroll.com>
> 
> Add the necessary bits to use DDR3 on imx platforms.
> 
> Tested on Ka-Ro tx8m-1610 (imx8mm) based platform with DDR3L memory.
> 
> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>

Applied with the subject fixed as suggested by Ahmad.

Sascha

> ---
>  drivers/ddr/imx/ddrphy_train.c | 18 ++++++++++++++++++
>  firmware/Kconfig               |  3 +++
>  firmware/Makefile              |  4 ++++
>  include/soc/imx/ddr.h          | 10 ++++++++++
>  4 files changed, 35 insertions(+)
> 
> diff --git a/drivers/ddr/imx/ddrphy_train.c b/drivers/ddr/imx/ddrphy_train.c
> index 24997a6f36676b61b548e08c330dbfdcf336abc0..3185aaf61e494a72ecfac5760fa06f6c39b398ce 100644
> --- a/drivers/ddr/imx/ddrphy_train.c
> +++ b/drivers/ddr/imx/ddrphy_train.c
> @@ -52,6 +52,19 @@ void ddr_get_firmware_ddr4(void)
>  			     &ddr4_dmem_2d_size);
>  }
>  
> +static const u16 *ddr3_imem_1d;
> +static size_t ddr3_imem_1d_size;
> +static const u16 *ddr3_dmem_1d;
> +static size_t ddr3_dmem_1d_size;
> +
> +void ddr_get_firmware_ddr3(void)
> +{
> +	get_builtin_firmware(ddr3_imem_1d_bin, &ddr3_imem_1d,
> +			     &ddr3_imem_1d_size);
> +	get_builtin_firmware(ddr3_dmem_1d_bin, &ddr3_dmem_1d,
> +			     &ddr3_dmem_1d_size);
> +}
> +
>  void ddr_load_train_code(struct dram_controller *dram, enum dram_type dram_type,
>  			 enum fw_type fw_type)
>  {
> @@ -82,6 +95,11 @@ void ddr_load_train_code(struct dram_controller *dram, enum dram_type dram_type,
>  			dmem = ddr4_dmem_2d;
>  			dsize = ddr4_dmem_2d_size;
>  		}
> +	} else if (dram_is_ddr3(dram_type)) {
> +		imem = ddr3_imem_1d;
> +		isize = ddr3_imem_1d_size;
> +		dmem = ddr3_dmem_1d;
> +		dsize = ddr3_dmem_1d_size;
>  	} else {
>  		panic("No matching DDR PHY firmware found");
>  	}
> diff --git a/firmware/Kconfig b/firmware/Kconfig
> index 14a1c3d3a84407029e576e8e46993f828784f48b..a97a1e0dd324fa2ff95a0e77d1057bc45aa1ad07 100644
> --- a/firmware/Kconfig
> +++ b/firmware/Kconfig
> @@ -22,6 +22,9 @@ config MISSING_FIRMWARE_ERROR
>  	  If in doubt, say Y and refer to the documentation on where to acquire the
>  	  needed firmware.
>  
> +config FIRMWARE_IMX_DDR3_PMU_TRAIN
> +	bool
> +
>  config FIRMWARE_IMX_LPDDR4_PMU_TRAIN
>  	bool
>  
> diff --git a/firmware/Makefile b/firmware/Makefile
> index 1fe770a2d900f216dd457d88aee761df4ada26c6..163055554d51b0cc9547f4a43f97c39d23f8eb65 100644
> --- a/firmware/Makefile
> +++ b/firmware/Makefile
> @@ -12,6 +12,10 @@ pbl-firmware-$(CONFIG_FIRMWARE_IMX_DDR4_PMU_TRAIN) += \
>  	ddr4_imem_1d.bin \
>  	ddr4_imem_2d.bin
>  
> +pbl-firmware-$(CONFIG_FIRMWARE_IMX_DDR3_PMU_TRAIN) += \
> +	ddr3_dmem_1d.bin \
> +	ddr3_imem_1d.bin
> +
>  pbl-firmware-$(CONFIG_FIRMWARE_IMX8MM_ATF) += imx8mm-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MM_OPTEE),-optee,)
>  pbl-firmware-$(CONFIG_FIRMWARE_IMX8MN_ATF) += imx8mn-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MN_OPTEE),-optee,)
>  pbl-firmware-$(CONFIG_FIRMWARE_IMX8MP_ATF) += imx8mp-bl31.bin$(if $(CONFIG_FIRMWARE_IMX8MP_OPTEE),-optee,)
> diff --git a/include/soc/imx/ddr.h b/include/soc/imx/ddr.h
> index 1e64613895d1b0bcfd5f48a55e0a8bcabd4d96c5..642606290082643dfed9fbeb283652b877d28639 100644
> --- a/include/soc/imx/ddr.h
> +++ b/include/soc/imx/ddr.h
> @@ -18,6 +18,7 @@ enum dram_type {
>  #define DRAM_TYPE_MASK	0x00ff
>  	DRAM_TYPE_LPDDR4	= 0 << 0,
>  	DRAM_TYPE_DDR4		= 1 << 0,
> +	DRAM_TYPE_DDR3		= 2 << 0,
>  };
>  
>  static inline enum dram_type get_dram_type(unsigned type)
> @@ -115,11 +116,14 @@ struct dram_controller {
>  
>  void ddr_get_firmware_lpddr4(void);
>  void ddr_get_firmware_ddr4(void);
> +void ddr_get_firmware_ddr3(void);
>  
>  static inline void ddr_get_firmware(enum dram_type dram_type)
>  {
>  	if (dram_type == DRAM_TYPE_LPDDR4)
>  		ddr_get_firmware_lpddr4();
> +	else if (dram_type == DRAM_TYPE_DDR3)
> +		ddr_get_firmware_ddr3();
>  	else
>  		ddr_get_firmware_ddr4();
>  }
> @@ -188,6 +192,12 @@ static inline bool dram_is_ddr4(enum dram_type dram_type)
>  		dram_type == DRAM_TYPE_DDR4;
>  }
>  
> +static inline bool dram_is_ddr3(enum dram_type dram_type)
> +{
> +	return IS_ENABLED(CONFIG_FIRMWARE_IMX_DDR3_PMU_TRAIN) &&
> +		dram_type == DRAM_TYPE_DDR3;
> +}
> +
>  #define DDRC_PHY_REG(x)	((x) * 4)
>  
>  #endif /* __SOC_IMX_DDR_H */
> 
> ---
> base-commit: 8785a6ad7467b6f1f70b6e12aa2ceb2fdd5d8546
> change-id: 20251008-ddr3-177f68e06a31
> 
> Best regards,
> -- 
> Maud Spierings <maudspierings@gocontroll.com>
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |